A-Series/B-Series
The following 3-pin version for the A-Series (plastic) was developed by NEUTRIK for installation of a number of mounting plugs in small spaces. They can be installed from the inside with self-cutting screws. The B-Series is the metal version. There are a number of versions available for print-connection. The respective information is stated below.
IMPORTANT: The A-/B-Series complies with the industrial standard for e.g.
installation in mixing boards, DI-boxes, etc. They will not fit common patch panels with universal bore holes (D-Series).
Symbol legend, order-no. code:
| V | = | Vertical printer connection, straight |
| H | = | Horizontal printer connection, angled |
| HL | = | Horizontal printer connection, to left |
| HR | = | Horizontal printer connection, to right |
| Y | = | IDC-version |
| 2 | = | Housing and ground pin separate from Pin 1 |
Suitable screws for the A-Series are available under "MODULAR SYSTEMS" > SYSBOXX-Screw sets. Countersunk installation 2.5 mm possible (order-no. S-3X8S-I-ASCREW.)
A-Series print-mounting plug
| Contacts | ORDER-NO. Nickel |
ORDER-NO. Black |
|
Plastic housing, pins gold-plated: |
  |
||
| 3-pin male | |||
| 3-pin male | |||
| 3-pin male | |||
Metal housing, pins gold-plated: |
 |
||
| 3-pin male | |||
| 3-pin male | |||
| 3-pin male | |||
