Transformers

Plug connectors | Various

TRANSFORMERS

Line/splitter transformers
These line/splitter transformers made in Germany are especially manufactured for SOMMER CABLE and stand out with linearity, low vibration, and low resistance values. The casings are suitable for print assembly, are Mu-metal shielded, and provide optimum protection against interference signals. Along with the SOMMER-transmitters we have a suitable individual printed circuit board available for do-it-yourself installation. This printed circuit board is designed for SPLIT 1:1, and SPLIT 1:1+1 for use with NEUTRIK NC3FDH. This enables flexible implementation of compact single channel units, from one-channel-separator solution all the way to multi-channel-splitter system.
For especially difficult and high quality applications we now offer a transformer made by the Swedish manufacturer LUNDAHL. Model LL1570 is primarily used for the SYSBOXX (see "Modular Systems"). This transformer fulfills all the requirements set forth in the Broadcasting Guidelines, making it perfectly suitable for even the highest demands.

Technical Data: Split 1:1 Split 1:1+1 LL1570 LL5402

Application: Microphone
transmission Microphone
transmission Microphone
transmitter Line transmitter

Transformer type: 1:1 1:1+1 1+1:1+1 1+1:1+1

Housing shielding: MU-metal MU-metal MU-metal MU-metal

Dimensions (WxLxH approx.): 28 x 23 x 17 mm 28 x 23,5 x 17 mm 38 x 24 x 17 mm 43 x 28 x 21 mm

Input/source: 600 Ohm 600 Ohm 600 Ohm 600 Ohm

Output/load: 10 kOhm 10 kOhm 1 kOhm 600 Ohm

Max. level: +12 dB +12 dB +16 dB +22 dBU

THD-factor: < 1,0 % @ 40 Hz < 1,0 % @ 40 Hz < 1,0 % @ 50 Hz < 0,1 % @ 50Hz

Frequency range: 40 - 15.000 Hz
(+/- 0.5 dB) 40 - 15.000 Hz
(+/- 0.5 dB) 10 - 200.000 Hz
(+/- 0.5 dB) 20 - 40.000 Hz
(+/- 0.3 dB)

Test voltage winding/winding: 500 V 500 V 4 kV 4 kV

Test voltage winding/core: 500 V 500 V 2 kV 2 kV

SPLIT-1:1 & SPLIT-1:1+1 dimensions, grid dimension and pin-wiring

Type ORDER-NO.

Sommer SPLIT 1:1 SPLIT-1:1

Sommer SPLIT 1:1+1 SPLIT-1:1+1

Lundahl LL1570 LL1570

SPLIT-BOARD f. Sommer SPLIT SPLIT-BOARD

Ready-to-connect incl. board/NC3FDH, incl. electronically activated resonance damping and signal isolation

SPLIT 1:1 SPLIT-B-1:1

SPLIT 1:1+1 SPLIT-B-1:1+1

LL1570 / 4-channel board SBC13-4XF1:1+1L

SOMMER SPLIT 1:1+1 / 4-channel board SBC13-4XF1:1+1S

If SPLIT-1:1 is used on the SPLIT-BOARD only Output 2 is activated.