FLOOR TANK WITH SYSTEM The ideal installation rack made of tough 2.0 mm powder-coated stainless steel for modular installation in all areas of media technology, for audio, video, and power. Up to 16 x D-flange modules can be installed in 9.5", 6 WU (6 width units = 42 DU, accord. to DIN) according to your specifications. SYSFLOOR is available in two different models. The SYSFLOOR-06, 9.5", 6 BE can be optionally quipped with up to 16 x D-flanges and offers a solid strain relief ring with 19 cable installation positions. The installation size of the SYSFLOOR-04 with 4 BE is suitable for one mounting box. This enables the installation of both SYSBOXX and house installation components in one tank. The two installation racks are compatible with the Ackermann floor tank, both round and square (e.g. GESR9) and are equipped with mounting holes in a 5.08 mm-grid pattern (for self-threading screws M2.5 accord. to DIN 7500). Ground connection is provided by a ground bolt M3 and a shiny, conductive support surface for front panel installation. Suitable front panels and installation screws are available on the SYSBOXX pages or under www.sysboxx.com SYSFLOOR-06 Variable installation of 2 U front panels SYSFLOOR-04 Application example: ORDER-NO. DESCRIPTION SYSFLOOR-06 Installation rack for floor tank, 6 WU can be equipped with SYSBOXX MKII front panels 2 U SYSFLOOR-04 Installation rack for floor tank, 4 WU compatible with SYSBOXX MKII front panels 2 U S-M2,5X8SGF-I Screw set, 50 x M2.5x10 countersunk screws (Torque 8) for front panel installation