Active Components
| Converters Different transmission format are not compatible. A converter is required for conversion. Such units are easily realized for analog use. To convert analog TV signals into image signals for PC monitors, analog-digital converters that recalculate the image line by line on a digital level are needed. This also applies for the conversion to digital TV formats (SDI). |
| KR-401C |
KR-401DN |
|
KR-VP100 |
|
|
|
|
|
| KR-FC4 |
|
KR-VP414XL |
|
KR-VP416 |
 |
 |
 |
| KR-7408 |
|
KR-7508 | |
KR-VP502XL |
 |
 |
 |
| ORDER-NO. | Function | Inputs | Outputs | Band with | Level | Connection |
| KR-401C | Format converter | 1 x Y/C | 2 x Y/C + 2 x FBAS | 160 MHz | 1Vpp nominal; 75 Ohm | S-video / BNC(FBAS) |
| KR-401DN | Format converter | 1 x FBAS | 1 x Y/C | 3.6 MHz (Y) | Y= 1Vpp; 75 Ohm C= 1Vpp; 75 Ohm |
BNC (FBAS); S-video |
| KR-VP100 | Standard PC-interface |
1 x VGA | 1 x VGA + 1 x RGBHV |
360 MHz | 0.7Vpp 75 Ohm; H+V = TTL-level |
HD-15; 5 x BNC |
| KR-VP414XL | Scaler/format converter to VGA, HD |
1x FBAS; 1x Y/C |
Analog: RGBHV |
Output RGBHV for VGA, SVGA, XGA + WXGA |
1Vpp 75 Ohm | HD-15 |
| KR-VP416 | Scaler/format converter to VGA, HD, DVI-I |
1x FBAS; 1x Y/C |
Analog: RGBHV Digital: YPbPr |
Output RGBHV for VGA, SVGA, XGA + WXGA |
1Vpp 75 Ohm | HD-15 DVI-I |
| KR-7408 | Format converter programmable via RS232 |
1 x SDI | 1 x SDI; 1 x FBAS; 1 x Y/C / YUV |
5.7 MHz (analog) | SDI ref. SMPTE-259M; | BNC; DSUB 9p |
| KR-7508 | Format converter programmable via RS232 |
1 x FBAS; 1 x Y/C |
2 x SDI | Digital Res: 10 Bit | SDI ref. SMPTE-259M; | BNC (FBAS); S-Video DSUB 9p |
| KR-FC4 | Format converter | 1 x RGBS | 1 x YUV component video | > 5 MHz | 0.7Vpp 75 Ohm | SCART/ 3 x Cinch |
| KR-VP502XL | Scan converter | VGA/ UXGA; HD |
Composite video / S-video | 1Vpp 75 Ohm | HD-15; BNC, S-video |