Active Components   |   Wall-Remote Stop searching for the remote control... ...because now it is permanently mounted on the wall and can no longer hide. With the Wall-Remote you no longer require user information for daily operation and the batteries will never be empty again. The Wall-Remote is more than a remote control. You can custom-label 8 buttons and pre-program them with random commands. With the Wall-Remote you can control infrared and relay contacts and even enable media control functions. The interface units de-energise after the show, so you can save money on energy and extend the life or your equipment. The infrared commands are as easy to program as on any freely programmable remote control for HiFi-application. Just hold the unit from which you wish to take over a function in front of the wall module. Then set the desired button on the Wall-Remote to teach-mode and select the control command to be copied on the remote control for the respective unit - that's all! In addition to the infrared-sender inside the unit you can use a cable to connect 2 more infrared-senders to control units that are not in direct visual contact with the Wall-Remote. A suitable power supply (+7V) is included in the delivery, with an extension option if there should not be enough space available at the desired installation location, e.g. the mounting socket, inside the wall or table module. A key switch is available to prevent unauthorized use. The Wall-Remote is simply ideal for halls and conference as well as training and meeting rooms. The casing is made of stainless steel. W x H x D: 81 x 81 x 30 mm Design, color: Jung LSS990 stainless steel

Application example: Existing units: Laptop (connected via table tank) DVD-player (permanently installed) Projector below ceiling (with lift) Screen Blinds Amplifier with speakers In this example the projector lift, the blinds and the screen must be able to impulse-traverse to the respective output or end position. Button assignment with function: Button 1 + 2: Volume control for amplifiers Button 5: Switch amplifier input to laptop via relay, switch projector to input via infrared Button 6: Switch amplifier input to DVD-player via relay, switch projector to input DVD-player via infrared Button 7 + 8: Switch projector and amplifier ON and OFF via infrared, control screen, ceiling lift and blinds via relay. In this example Buttons 3 + 4 are still free for other applications. The "WALL-REMOTE XL" makes all your dreams come true. You can additionally program it via the RS232-interface on your computer. An easy to use software package with immediate testing function is included. With the optional "DUO-RELAIS"-unit you can add two controllable power circuits for e.g. screen lift and blinds. You can connect the beamer directly up to the relay unit "DUO-POWER". Automatic beamer-overrun and final shutdown upon deactivation.

DUO-RELAIS

ORDER-NO.	DESCRIPTION
WALL-REMOTE	Wall-remote stainless steel
WALL-REMOTE-XL	Wall-remote stainless steel RS232, incl. software package
DUO-RELAIS	Double relay for WALL-REMOTE
DUO-POWER	Double relay pre-wired for beamer overrun + final shutdown