19" PANELS
A 19" panel is not just...
a piece of steel paneling with holes, but an important tool for media and stage rack wiring. These panels should not only have a strong wall thickness and an indestructible coating, but should also be constructed to withstand large strains and pressure without collapsing. The front panels are made of black powder-coated steel paneling with a wall thickness of 1.5 mm or 2 - 3 mm (depending on the version).
To fulfill the high demands placed on quality each punched hole is precisely calculated for clear and sensible placement, and of course, all our panels have a stabilizing "U-fold".
The panels are not numbered. You can label them yourself or use our writable magnetic strips (order-no. ZSPB) or numbered strips (order-no. NSPB...).
Panels with universal, punched holes are usually equipped with an integrated cable strain relief. Of course we also manufacture special versions beginning at a quantity of 50 pieces, precise plans and drawings must be provided. Please send them to us via fax or eMail under info@sommercable.com.
 |
 |
|
|
||
 |
PA-BL1-SO |
Rack panel, empty
Empty panel for covering, filling, or do-it-yourself assembly
| ORDER-NO. | VERSION | HEIGHT | WEIGHT [kg] |
| PA-BL0,5 | 1.5 mm | 0.5 U | 0.250 |
| PA-BL1 | 1.5 mm | 1 U | 0.500 |
| PA-BL1-SO | 1.5 mm + logo | 1 U | 0.500 |
| PA-BL2 | 1.5 mm | 2 U | 1.500 |
| PA-BL3 | 1.5 mm | 3 U | 2.000 |
| PA-BL4 | 1.5 mm | 4 U | 2.500 |
Rack panel, with brushes for cable infeed
With integrated strain relief:
| ORDER-NO. | VERSION | HEIGHT | WEIGHT [kg] |
| PA-KB1 | 1.5 mm steel | 1 U | 0.335 |
Rack panel, with brushes for cable infeed
For supplementary installation, strain relief with ZEPB available:
| ORDER-NO. | VERSION | HEIGHT | WEIGHT [kg] |
| PA-KA1 | 1.5 mm steel | 1 U | 0.335 |
Rack panel, venting
Venting panels with ventilation slots
| ORDER-NO. | VERSION | HEIGHT | WEIGHT [kg] |
| PA-LU1 | 2 mm steel | 1 U | 0.160 |
| PA-LU2 | 2 mm steel | 2 U | 0.260 |
| PA-LU3 | 2 mm steel | 3 U | 0.380 |
| PA-LU4 | 2 mm steel | 4 U | 0.500 |
Rack panel, ventilation
Venting panels with ventilation holes
| ORDER-NO. | VERSION | HEIGHT | WEIGHT [kg] |
| PA-L1V3 | 1 vent | 3 U | 0.660 |
| PA-L2V3 | 2 vents | 3 U | 0.540 |
| PA-L3V3 | 3 vents | 3 U | 0.420 |
Rack panel, universal D-series
for XLR, jack plug, Speakon NL4MP, BNC, etc., 1 U version with integrated cable strain relief
2 U version, strain relief with ZEPB available
| ORDER-NO. | VERSION | HEIGHT | WEIGHT [kg] |
| PB06X | 6 holes | 1 U | 0.320 |
| PB08X | 8 holes | 1 U | 0.300 |
| PB12X | 12 holes | 1 U | 0.140 |
| PB16X | 16 holes | 1 U | 0.130 |
| PB16X2 | 16 holes | 2 U | 0.210 |
| PB24X2 | 24 holes | 2 U | 0.200 |
| PB32X2 | 32 holes | 2 U | 0.240 |
Rack panel with multipin punched tabs
With punched holes for multipin connectors made by Harting, Ilme, etc. Version PMP2X2 can be equipped with a CHI 16 or a CHI 24 without the use of an adapter plate, version PMP6X3 with a CHI16. The PMP6X4 panels have punched holes for a CHI24.
| ORDER-NO. | VERSION | HEIGHT | WEIGHT [kg] |
| PMP2X2 | 2 punched holes | 2 U | 0.600 |
| PMP6X3 | 6 punched h. (CHI16) | 3 U | 0.840 |
| PMP6X4 | 6 punched h. (CHI24) | 4 U | 0.950 |
Rack panel, with BNC holes
With 16 or 32 punched holes for screwable standard BNC sockets that can be secured on the back with a counter-nut.
| ORDER-NO. | VERSION | HEIGHT | WEIGHT [kg] |
| PUHF16X | 16 holes | 1 U | 0.300 |
| PUHF32X2 | 32 holes | 2 U | 0.600 |
| ORDER-NO. | VERSION | HEIGHT | WEIGHT [kg] |
| PSUB09-8 | 8 x SUB-D09/15HD | 1 U | 0.300 |
| PSUB25-8 | 8 x SUB-25 | 1 U | 0.300 |
Magnetic labeling strips
| ORDER-NO. | |
| ZSPB | |
Universal labeling strips with an adhesive surface of 443 mm,
for do-it-yourself assembly with paper strips, 9 mm in size.
The overall height incl. carrier is 11 mm.
| ORDER-NO. | HEIGHT |
| P19-BS09 | 9 mm |
Numbered strips suitable for the following loaded panels
| ORDER-NO. | VERSION |
| NSPB16 | Numbers 1 - 16 |
| NSPB32 | Numbers 17 - 32 |
Lacing bar
| ORDER-NO. | |
| ZEPB |