The SYSPANEL and also our new SYSPANEL5 enable a quick and easy realization of patchbays, equipment connection panels, connection splitters or handover points, e. g. in control or equipment rooms. The SYSPANEL can be variably fitted with four of our standard pc board modules (D-type equipping not possible), whereas the SYSPANEL5 and its big brother SYSPANEL5-XL can accept up to 5 SYSBOXX 1 WU front panels (D-type equipping possible). These are pictured on the following pages. Alternatively the SYSPANEL5-XL can be used to accept up to five modules of the CARDINAL DVM line (see section “Active Components“). The pc board modules are available as 4-channel boards with NEUTRIK XLR 3-pole or 5-pole, as A or B series (male or female resp). On the rear the modules are equipped with either 12 cutting clamps (LSA technology) or 12 self-lifting terminal blocks. Optionally the NEUTRIK EtherCON-RJ45 is also available in connection with the SBC13-EBL pc board module. This allows to build a combined audio, DMX and network patch panel on only 1 rack space.
To relieve the feed lines from strain, the housing is fitted with 28 metal tongues where cable binders can be fixed. The earthing is provided by an M4 ground bolt. Our SYSBOXX labeling profile allows an individual labeling. If desired, the SYSPANEL can be closed from above with the optional SYSPAN-C cover.
The labeling profile and also the XLR modules are fitted by self-tapping M2.5 Torx (star) screws. These can also be found as screw kits on the following pages.
Product benefits:
- High packing density on 1 rack space
- Great variability due to a large range of front panels (e. g. for building a connection panel for media servers)
- Flexible, fast equipping
- Subsequently upgradeable and thus future-proof
