SYSBOARD – the modular wall-mount enclosure
... convenient solutions are in demand. Due to numerous customer requests, we have developed the SYSBOARD wall-mount installation enclosures. They allow the installation of classic junction boxes – combined with the modular flexibility of the SYSBOXX. Our large range of modules ensures that expensive custom-built orders and barely calculable delivery times are forever gone. The new compact enclosures in the SYSBOARD line offer cost-efficient wall connection panels with a minimum expenditure of time and utmost flexibility in the future. The standard color available ex warehouse is charcoal gray RAL 7016. Four different sizes are available from stock: one 2 U version with 2, 3 or 6 WU and one 4 U version with 6 WU (WU = width unit = 35.6 mm / 1.4“). The 2 and 3 WU enclosures have a punched PG29 opening on the bottom. The 6 WU enclosures have two pre-punched PG29 openings: one on the bottom and one on the side; these can be broken out when needed. The outer dimensions are 100% compatible with the 1 DU (depth unit) SYSBOXX and, because of the hanging slots on the rear panel, they can be integrated almost everywhere in an easy and inconspicuous way.
The SYSBOARD18 shines with a locking door and a mounting level for the front panels displaced backward by 100 mm (4”). That way also a multi-pin connector may remain plugged in even with the door closed. The door can be changed from a left-hand to a right-hand stop and is equipped with a square lock (optionally also available with a cylindrical lock). The opening of 154 x 30 mm (6.1 x 1.2”) at the bottom of the enclosure is used to mount the included cable feed-through brush or a metal cover plate. When closed (i. e. with the bottom panel installed) IP44 protection class is achieved.
The supplied mounting brackets allow three different mounting positions: "on-wall" or "in-wall" in two different depths. Over a width of 6 WU and a height of 3 x 2 U the SYSBOARD18 can be fitted with SYSBOXX faceplates. SYSBOXX faceplates can equally be fitted on the bottom or the rear side of the enclosure to e. g. deal with the cable feed-in or add more connections. Please order the required front panel screws separately.