One thick coat...Protects the inner structure against mechanical strain such as pulling, tearing and knotting. This is why we gave STAGE 22 a thick outer jacket of 6,40 mm. But also the electrical values and the technical construction are very presentable: the STAGE 22 has a low capacitance and high bending cycles, provided by the super thin, tightly stranded single wires. The shielding of bare Cu wires has an optical coverage of 99 % (instead of the otherwiseusual 85 %). The STAGE 22 is therefore the ideal cable for stage, homerecordists, renters and ELA technicians. The STAGE 22 is a very inexpensive cable, but you won't have to accept any trade-offs.Advantages:High transmission quality due to the usw of fine strandingVery rugged owing to the thick, soft PVC jacketGood shielding due to dence helical copper mesh screenHigh flexibility makes it easy to reelAffordable priceApplication:Stage applicationHome recording

Swinging with your girlfriend...like Tarzan in the jungle. With this cable you could just do that: it can take a lot of tugging, bending, and rough wear and tear. This is important when installing it in sharp-edged lighting trusses.The Binary 234 AES/EBU MKII is an outstanding cable for the transmission of digital signals in the 110 Ω AES/EBU and DMX data format. Its shielding is provided by an aluminum-vaporised fleece and a helical copper mesh screen with 100 % coverage. So it offers a very good protection against electric and magnetic interferences. This cable ensures an error-free data transfer over distances of up to 1000 metres. With the Binary 234 AES/EBU MKII you’ll be on the safe side.Advantages:AES/EBU- and DMX-conformant, highly flexibleVery good shielding due to the use of a helical copper mesh screen plusan aluminium-vaporised fleeceExtremely rugged due to the special tough jacketOnly a little more expensive than a standard microphone cableApplication:Networking of scanners, lighting systems, digital mixing consoles etc.For indoor and outdoor installationConnection of digital audio amplifiers, DAT recorders etc.

Where brute force reigns in a useful manner...the sound people are at work and they will treat the cables not exactly squeamishly.No problem for our robust Meridian Mobile SP225. This cable has been designed particularly for loudspeakers and here it meets all specific technical requirements. Low-oxygen Cu wires ensure better sound quality and a longer life. All PVC versions are easy to reel.Advantages:flexible and easy to rollable for cable reelSmall in diameterVery durable due to the use of special coating mixturesAffordable priceApplication:PA sound systems of all kindsFor ELA technologyCabling of HiFi systems

No blood running through those veins...but yet a whole lot of life. A wire gauge of 2 x 0,34 mm² is impressive and the electrical data speaks for itself. A cable that provides great performance data at an excellent price, used for stage and studio settings. The large cross section and the low capacitance guarantee outstanding transmission quality, even over longer distances. The shielding, made of bare copper wires has a 95 % optical coverage (instead of the usual 85 %). The robust, rubberlike, matt outer sleeve is preferred by performing musicians and guarantees outstanding flexibility even in lowest temperatures.Advantages:High transmission quality through the use of oxygen-free copper stranding with a large wire gauge of 2 x0,34 mm²Very low capacitance due to PE insulationGood shielding due to the dense Cu mesh screenHigh flexibility makes it easy to reelApplication:Stage applicationStudio operationPermanent Installation

The wires are running hot...and the crowd is cheering when the speaker walls are turned up all the way. Then not only the spirits are heating up, but also the cables. This puts very high demands on the cable which means that the outer jacket of the cable must be as thick as elephant skin. But it should also be flexible, robust, tread-resistant, easy to reel and of course reusable time and again. Compare it with other speaker cables – the ELEPHANT is bound to convince you all out!Advantages:Loss-free transmission due to the special litz stranding technologyHighly flexible and stage-proof, easy to reelCompatible with the common NEUTRIK® speakON® connectorsEasy to use due to well-insulated, numbered wiresApplication:Professional PA systemsSurround and woofer systemsFor permanent installation

As swift as an arrow...is the data transmission of the SC-Vector (RCB) with its 1.5 Gb/s rate which also guarantees a low return loss. Of course, the SC-Vector (RCB) can also serve as a high-quality G-SDI-video line for studio or OB van applications. With its dual shielding and outstanding damping values it offers numerous benefits compared to simple video cables. In comparison to a 0.6/3.7 video cable it allows up to 30 % longer transmission distances. The SC-Vector (RCB) is used in OB vans, digital TV, at sporting events, live shows or other large events.Advantages:Low damping values for long distancesRobust and durable outer sleeveApplication:Digital SDI/HD-SDI/3G-SDI long-distance transmissionVideo transmission for OB van technology

When the lights begin to dance...the people stare in wonder! But there is quite a bit of technology behind it. And cables do not play the least important part here. The power for the spotlights and the control signals for their movements must be transmitted via cables. Both cables are combined in a robust cable hose, providing the input lead for the lighting desk and other DMX 512-equipped control devices. The SC-Monolith 1 POWER/DMX consists of a 3 x 1,50 mm² power cable and one DMX 512 line. Each DMX wire pair is shielded by a tinned helical copper mesh. The power cable was developed in compliance with VDE and has its own jacket for extra safety. Of course the AES/EBU cable can also be used as a microphone cable or as a feed line for active loudspeaker systems.Advantages:Parallel control for lighting boards through one cable via power line and DMX signalVery flexible and enormously tread-resistant due to the round jacket made of cotton and viscoseVery good pairwise shielding of the DMX lines due to tinned helical copper mesh screen or copper braidingMiscellaneous:Note: two white filling elements are integrated in the cable (see cable illustration)Application:Control line for DMX lighting consoles (wave impedance of 0 Ω)Analogue + digital audio multipair with power supply

Especially for the tough stage routine...We have reworked the jacket stability of the 4.0 mm² (0.006 sq in.) ELEPHANT series. In addition it is flexible, robust, tread-resistant, easy to reel and always reusable, the jacket surface is now smoother and therefore easier to clean. Especially for the common speaker multipins (CA-COM 8-pole, NL8, LKS19, EP5) we have adapted the outer diameters so that they can be assembled with relatively little effort.Advantages:Loss-free transmission due to the special litz stranding technologyHighly flexible and stage-proof, easy to reelCompatible with CA-COM 8-pin, NL8, LKS19, and EP5 connectorsEasy to use due to well-insulated, numbered wiresApplication:Professional PA systems

CATlike agility and mobility...Advantages:Safe data transfer due to high-quality insulation and shieldingGreat durability due to a special, extremely robust jacket compoundOutdoor temperature resistant, easy to reelApplication:For mobile OB van use and outdoor applicationsFor all CAT.5e, CAT.6, CAT.6a and CAT.7 transmissions

The memory cable...Will get things in order. In switching cabinets and racks it often looks like on grandma's knitting pattern. Tidiness is indispensable. The SC-Isopod SO-F22 is a 2-wire, foil-shielded cable with a compact outer diameter of 3,30 mm. The cable is primarily used for the internal wiring in audio and hi-fi components. It has a “memory effect“ and can be laid “around the corner“ easily. The Cu wires of the individual wire pairs are already pre-stranded and very easy to strip. For a simpler assembly, the cable has an additional pre-stranded, tin-plated drain wire. It is shielded by an AL/PT foil that will automatically stick on the jacket when stripping it.Advantages:Quick and easy to handleRobust plastic jacket for long lifeEasy to lay thanks to “memory effect”Application:Internal wiring of racks, audio and hifi components

No less, but lesser...and easy to handle since it is available in four colors. Otherwise the technical and electrical construction is similar to the SC-SOURCE cable.With its the small diameter it fits virtually all current TT-phone and B-gauge connectors and can also be used for Y-adapter cables. Due to its carefully designed shielding the cable offers the extra benefit of an amazing tread resistance and tensile strength. The white version is recommended for the unobtrusive installation in churches.Advantages:Ideal for patch cables owing to its small outside diameter of 4.6 mmVery good tensile strength due to the dual shielding construction and specialPVC jacketLinear sound transmission due to the special-designed conductor pairs and thecopper wire stranding100 % shielding due to a metallised fleece plus additionalhelical copper mesh screenApplication:Professional studio patch connectionHigh-quality mini microphone cableHigh-class phono and RCA connectionsLong-distance MIDI cablingInterior rack wiring and connection of audio components and effects devices

The marathon runner...Will have a hard time and must run. Likewise our cables must cover the long distances at the sports arena. But they will lie and not run. So due to its cross-section 2 x 0,50 mm², this cable is also ideal for theaters, public buildings, etc. Owing to the 100 % shielding and the thick outer jacket, the SC-Primus is also recommended for installations at discotheques, because neither the aggressive nicotine nor wild temperature fluctuations can hardly do any harm to this cable. Gigging musicians swear by this cable, rental shop owners prefer the SC-Primus because of its durability and a slight bounce, making manual winding easy.Advantages:Optimum transmission quality even with excess lengths due to the large wire gauge of 2 x 0,50 mm²100 % shielding due to dense helical copper mesh screen and extra metallised fleeceGreat durability due to the thick PVC with a diameter of 6,70 mmEasy to reel and good tensile strengthApplication:Broadcasting and OB van technology, building installationProfessional studio technologyTough stage applicationInstallation in discos, coffee shops, at sporting events

CATlike agility and mobility...The SC-Mercator CAT.6 SUPERFLEX is the ideal cable for mobile outdoor transmissions of digital audio or network signals, e.g. for use in the OB van. The double-jacket design results in an unprecedented flexibility. The outer jacket is made of an extremely notch and tread resistant and also cold flexible PUR compound, whereas the inner jacket consists of a highly flexible S-PVC. Between the two jackets is a braided shield of tin-plated copper. This construction makes the cable extremely flexible and very easy to reel.For AoIP transmission lengths > 75m we recommend our multimode and singlemode fiber systems with the connectors HI-FIBER4, FIBERLENS and opticalCON®.Advantages:Safe data transfer due to high-quality insulation and shieldingGreat durability due to a special, extremely robust jacket compoundResistant to outdoor temperatureseasy to windMiscellaneous:Ultra flexible and easy-to-reel network cable with a large wire cross-section for outdoor applications.Outstanding network performance also for cable lengths >100 m (328 ft.).Double-jacket construction: The outer jacket is made of an extremely notch and tread resistant and also cold flexible PUR compound, whereas the inner jacket consists of a highly flexible S-PVC. Between the two jackets is a braided shield of tin-plated copper with >80 % coverage.Great durability due to a special, extremely robust jacket compoundApplication:For mobile OB van use and outdoor applicationsFor mobile sound, light or video transmissionsFor all CAT.5e, CAT.6, CAT.6a and CAT.7 transmissions

Very common throughout the Wild West…is this robust and dependable video and SAT cable that was originally designed in the United States. However, with its solid PE insulation its specifications were not satisfactory and the cable was not robust enough. Contrary to the original version we have significantly improved the new SC-Vector Plus DZ. Now it is SDI/HD-SDI capable and reelable and thus may be used as a flexible video line! It has a foamed insulation with a protective lacquer, a 7 x 0.40 mm litz construction, two overlaying cross meshes each with 100 % coverage and a weather-proof and notch-resistant PMB jacket. The copper meshes also make the cable extremely treadresistant and offer protection against rodents.Advantages:Excellent transmission quality due to foam insulationSteadily consistent valuesUV- and notch-resistant PUR jacket, rodent protectionApplication:Dual shielded cable for digital SAT systems and professional video technologyProfessional HD-SDI applicationsHighly flexible and easy to reel

A true allrounder...because it could not be any longer, faster or more flexible. The SC-Quantum QMC is just the cable that all “bending radius fetishists“ like event technicians, musicians and ambitious live sound people have always been dreaming of! The SC-Quantum QMC is absolutely torsionfree, i.e. it can be wound in a figure of “8“ easily and will not twist when winding or unwinding it.Not only the S-PVC-jacket, which is cold-resistant down to –30 °C and notch-resistant, feels soft – due to thesuperfine 0,07 mm (!) individual copper litz and the PE-insulated wire insulation, even the interior is wonderfully supple and unbreakable. From the 8-pair version upward we have included an extra yellow/green protective earth wire to provide for added stability and safety (PE = protective earth).The electrical and mechanical data are likewise remarkable: each wire pair is additionally tube-insulated, numbered and shielded by a helical Cu mesh screen with a 99 % coverage.Go figure this: the SC-Quantum QMC stands out with its low 45 pF wire/wire capacitance and will remain 110 Ω (AES/EBU) conform for several hundred metres!The wire pair diameter is perfectly suitable for directmounting (e.g. of an XLR connector). The interior isprotected against adverse influences by a highly flexiblePVC jacket with a wall thickness of almost 2 mm.There has never been a cable with such electrical andmechanical values for such a low price!Advantages:Each wire pair is individually insulated and shielded by a helical Cu mesh ( coverage)Very low wire/wire capacitanceHighly flexible and reelable without twistingIn compliance with AES/EBU ()Affordable priceApplication:Professional stage and live multicore for separate or central earthingCreation of highly flexible studio looms, analogue and digitalPermanent Installation

Where brute force reigns in a useful manner...the sound people are at work and they will treat the cables not exactly squeamishly.No problem for our robust Meridian Mobile SP215. This cable has been designed particularly for loudspeakers and here it meets all specific technical requirements. Low-oxygen Cu wires ensure better sound quality and a longer life. All PVC versions are easy to reel.Advantages:flexible and easy to rollable for cable reelSmall in diameterVery durable due to the use of special coating mixturesAffordable priceApplication:PA sound systems of all kindsFor ELA technologyCabling of HiFi systems

This midget...With its 2,60 mm of diameter it fits in all places with limited space. The SC-Cicada SO-D14 was originally developed by us as a quality switching line for the internal wiring in racks or audio components. But after extensive tests at various microphone companies, they soon recognized the outstanding technical and electrical specifications of the cable. In the meantime the SC-Cicada SO-D14 can be found on a lot of clip and ear microphones, headphones, and speech units. The SC-Cicada SO-D14 is particularly valued for its extremely high flexibility, the tight spiral braid and the pre-stranded and tin-plated drain wire, which gives this cable an additional kink protection and tear strength. You are a maker of high-grade audio components? Then wire up your devices with this cable! Its low noise and shielding will excite you! With a notch-proof and temperature resistant PUR jacket!Advantages:Highly flexible because of its fine single litz designEasy to handle owing to the extra drain wire (0.22 mm²)Superb shielding due to the tight helical mesh screen with 95 % coverageDurable and notch-resistant due to the sturdy PUR jacketApplication:Interior wiring of mixing consoles, racks, and other audiocomponentsFlexible cable for clip-on microphones, earphones, speaker units, etc.Assembly of adapter cable

One step forward, one step back...Round and round, this ain't too hard. When data have to pass to and fro, a digital cable with return channel should be used. The wave impedance is also defined as 110 Ω with this cable. Of the 4 wires 2 are employed for the feedback function. The robust outer jacket is suitable for outdoor and fixed installations alike. Color coding according to DIN 47100. Owing to the double shielding (AL/PT foil + Cu braid) and the wire coding it complies with the generally applicable regulations (VDE 0812/VDE 0207). Transfer speed 256 Kbs pursuant to EIA 485 standard.Advantages:Digital transmission over long distances due to the DMX and AES/EBU standardsExcellent protection against electric interference (Cu mesh screen + AL/PT foil)Extremely robust due to the special tough jacketApplication:Networking of scanners and lighting systems with check-back functionConnection of digital control units and devices of all kinds

All the way to the horizon...and then some more. This is the transmission range of the SC-Vector Plus 1.2/5.0, because with its special dimensions and construction it has been designed for long distance HD-SDI applications. Even as an analogue cable it is already pretty amazing: you can transmit video signals over distances of up to 1000 m and as an SDI cable it can be used for distances of up to 600 m. The SC-Vector Plus 1.2/5.0 has an excellent shielding 100 % made of a tinned copper mesh plus AL/PT foil. The cable is very flexible and also suitable for mobile use on a cable reel. It is available in a single coax or a 5 x coax version with a PVC and FRNC jacket (according to test type C, IEC60332.3c). With HD-SDI the transmission range depends on the bitrate used (compressed or uncompressed). At 1.485 Gb/s (uncompressed) the damping value is drawn on at half the bitrate (720 MHz). The achievable cable length at a damping value <30 dB is considered as a relevant parameter.Advantages:Superb damping values for long distances of up to 1000 mRobust and durable outer jacket, reelableApplication:Digital HD/SDI long distance transmissionCabling for sporting events and big TV events; OB van technology

Where brute force reigns in a useful manner...the sound people are at work and they will treat the cables not exactly squeamishly.No problem for our robust Meridian Mobile SP240. This cable has been designed particularly for loudspeakers and here it meets all specific technical requirements. Low-oxygen Cu wires ensure better sound quality and a longer life. All PVC versions are easy to reel.Advantages:flexible and easy to rollable for cable reelSmall in diameterVery durable due to the use of special coating mixturesAffordable priceApplication:PA sound systems of all kindsFor ELA technologyCabling of HiFi systems

The hymns of praise by cable...Specialists make this cable a top seller. This microphone cable was originally developed for the makers of studio microphones. Their high quality standards helped us produce a professional and yet affordable studio microphone cable. SC-Source MKII is 100 % shielded by a tight Cu braid and a robust fleece woven around the wire pairs. The fleece is vaporized on both sides with a conductive aluminum coating. This ensures that even with heavy-duty use the 100 % shielding remains unchanged. This cable should be used where electric sources can affect the audio and data transfer. Cables with comparable electrical values cost almost twice as much with other manufacturers! Due to the fine 0,05 mm Cu wires it is a very popular cable for outdoor transmissions and mobile applications.Advantages:Neutral and loss-free audio transmission due to special copper strand design100 % shielding due to dense helical copper mesh screen plus extra AL fleece/AL foilProfessional technology at a budget priceAvailable in a notch- and cold-resistant PUR versionApplication:Professional studio and microphone technologyOutdoor transmission/OB vanPermanent stage application

Almost as old as Methuselah...that’s the SC-Mistral MCF multipair. We have been making it for almost 10 years using the same proven technology. The SC-Mistral MCF features the pairwise PVC insulation, as it is usual for studio cores. It has a hardwearing number overprint plus an extra colour-coding in steps of 8.The wire pairs of the SC-Mistral MCF have a pre twisted drain wire and another shielding made of AL/PT compound foil. For added protection against corrosion and oxidation both the conductors and the drain wire have been tinned. The cable is particularly easy to handle because the AL/PT foil will stick to the outer jacket when stripping. The SC-Mistral MCF is very easy to lay and reel. We also recommend it for the assembly of multicore adapters. Here the XLR and jack connectors can be mounted directly on the PVC jacket.Advantages:Additional insulation for each wire pair with a numbered and colour-coded PVC sleeveVery flexible and tread-resistant owing to the use of a rubberlike jacket materialSimple and fast handling due to the use of compound foil and a pre-twisted drain wireHigh bending cycles due to the tightly stranded Cu wiresReturns on the cable splice are instantly recognisable by the colour coding on the conductor pairsHigh transmission quality even with excess distances (low capacitance!)Affordable priceApplication:Ideal for studio installation and permanent installationFixed installation in theatres, public buildings etc.Construction of dependable cable reel systems

Swinging with your girlfriend...like Tarzan in the jungle. With this cable you could just do that: it can take a lot of tugging, bending, and rough wear and tear. This is important when installing it in sharp-edged lighting trusses.The Binary 234 AES/EBU MKII is an outstanding cable for the transmission of digital signals in the 110 Ω AES/EBU and DMX data format. Its shielding is provided by an aluminum-vaporised fleece and a helical copper mesh screen with 100 % coverage. So it offers a very good protection against electric and magnetic interferences. This cable ensures an error-free data transfer over distances of up to 1000 metres. With the Binary 234 AES/EBU MKII you’ll be on the safe side.Advantages:AES/EBU- and DMX-conformant, highly flexibleVery good shielding due to the use of a helical copper mesh screen plusan aluminium-vaporised fleeceExtremely rugged due to the special tough jacketOnly a little more expensive than a standard microphone cableApplication:Networking of scanners, lighting systems, digital mixing consoles etc.For indoor and outdoor installationConnection of digital audio amplifiers, DAT recorders etc.