Filter
Sommer cable Protective Bag for 19“ Stagebox 2 HU, later assembly, ideal protection for stage sub-distributors + 19“ components or stageboards, grey

BAG-BOXX

It does not matter...what shape, the protective bag will keep your multipinconnectors safe from impact, splash water, and otherinconvenient interferences...Since January 2005 the bags are available in differentsizes – also for installation at a later time – suitable forall common multipin and LK connectors made by ILME, LK, HARTIN, VEAM, AMPHENOL, etc.
€8.00*
connection-modul , plastic, colour: white

WALL1-HDMI

HDMI wall-mount module/ HDMI CAT.5/6 extender wall moduleThis fully wired HDMI wall module system range in RAL9010 is available in 3 versions.1. Single HDMI wall connection with breakout cable2. Double HDMI wall connection with 2 breakout cables3. HDMI CAT.5/6 extender wall connection with transmitter and receiverThe HDMI extender system consists of a transmitter with a power lead and HDMI socket, a receiver with HDMI socket as well as the corresponding 5 V, 2 A DCtransmitter power supply. The HDMI signal can be transmitted over a max. of 40 metres in a wall- or surface-mounted duct with two CAT.5 AWG24 cables or up to 60 metres with two CAT.6 AWG24 cables. (One CAT lead for sound, one CAT lead for picture).The recommended HDMI cable length from the socket to the component is 2 – 3 metres here. Smaller HD formats (720p, 480p) can be transmitted with longercable lengths than specified.The active signal is displayed on the transmitter and receiver via a red LED. Ideal for communications provision in training and conference rooms.hole size: 60 mm suitable for common flush- and surface-mounted socketsExternal frame dim.: 80.5 mm x 80.5 mm x 33 mmBandwidth: 2.25 Gbit/s
€10.90*
connection-modul , plastic, colour: white

WALL2-HDMI

HDMI wall-mount module/ HDMI CAT.5/6 extender wall moduleThis fully wired HDMI wall module system range in RAL9010 is available in 3 versions.1. Single HDMI wall connection with breakout cable2. Double HDMI wall connection with 2 breakout cables3. HDMI CAT.5/6 extender wall connection with transmitter and receiverThe HDMI extender system consists of a transmitter with a power lead and HDMI socket, a receiver with HDMI socket as well as the corresponding 5 V, 2 A DCtransmitter power supply. The HDMI signal can be transmitted over a max. of 40 metres in a wall- or surface-mounted duct with two CAT.5 AWG24 cables or up to 60 metres with two CAT.6 AWG24 cables. (One CAT lead for sound, one CAT lead for picture).The recommended HDMI cable length from the socket to the component is 2 – 3 metres here. Smaller HD formats (720p, 480p) can be transmitted with longercable lengths than specified.The active signal is displayed on the transmitter and receiver via a red LED. Ideal for communications provision in training and conference rooms.hole size: 60 mm suitable for common flush- and surface-mounted socketsExternal frame dim.: 80.5 mm x 80.5 mm x 33 mmBandwidth: 2.25 Gbit/s
€16.90*
Sommer cable Power Distribution Systems , Multipin 1 x 16-pole male/Multipin 1 x 16-pole female; ILME

997-R-00118

With its robust XLR-design housing, the RJ45 etherCON® from NEUTRIK® offers optimum protection. Ideal for the mobile use of network and media equipment. The panel socket has a special locking housing with an A- or D-flange design. The housing of the NE8MC is simply mounted around a premade RJ45 patch cable. The NE8MC1 is designed for direct fixing on the LAN cable with simultaneous assembly of the RJ45 connector.Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.
€59.56*
TT-Phone studio patch panel 1U, high quality, 96 TT-Phone sockets silver-plated with 5 soldering lugs

PBA1-TT96-S

Miscellaneous:Incl. labeling option at the top and bottom for paper stripsIncl. strain relief at the rearHigh packing density
€973.00*
Sommer cable Stagebox empty casing, 19“ BB-SERIES, 40 holes/1 x multipin panel hole, 6 HE, width: 483 mm, grey

BB1940

Go ahead, step on me, I can take it !Elaborate and almost indestructible 19“ stagebox for studio or live use and fixed installations. The borings are made for universal XLR connectors (e.g. NEUTRIK® D-series) and printed with large numbers. The lateral 19“ flange can be taken off for floor and wall installation. Screws and rubber feet included.
€174.99*
Fiber set 12-channel (FIBER12M), 200m + 2 x 12-way LC breakout boxes

997-P-FIBERL12MS

Fiber set 12-channel (FIBER12M), 200m + 2 x 12-way LC breakout boxes ------------------------------------------------------------------------------ Cable drum GT450 Cable: FO 12G 50/125µm PUR OM3 Connector left: 1 x FIBERLENS 12CH connector IP68, junior size, multimode cable end on KOMB.RM Connector right: 1 x FIBERLENS 12CH connector IP68, junior-size, multimode Assignment: A1->B1, B1->A1, A2->B2, B2->A2 ------------------------------------------------------------------------------ 2 x SB-1871 junction box, 19" 1U: SYSPAN5 with FIBER-12M <> 3 x FIBER4 = 3 x 4 x LCCompatible to HI-FIBER4 connector or alternatively to 4 single LC connectors ------------------------------------------------------------------------------ ------------------------------------------------------------------------------Configuration: 200,00 m Optical fiber SC-Octopus-G; 12 x 50/125 µm OM3; PUR-FRNC Ø 7,00 mm; black (590-0311-12-OM3)1 x SCHILL Kabeltrommel, GT450, core: 296 mm, thread width: 187 mm, Solid rubber (GT450)1 x FIBERL12M-C1 x SCHILL Winding attachment, for cable splice for GT310, HT and SK-Modelle (KOMB.RM)1 x FIBERL12M-C
€6,950.00*
BLACKBOXX 19" -> Square-MP-connector

BXPT-M36/00

In/Out: 36/00
Wired and loaded...are our 19“ stagebox systems (closed chassis) for installation in studio and stage racks. The 19“ housing is 94 mm deep. The number of height units (RU) is shown in the tables below.For the XLR equipping we use locking metal panel mount connectors from HICON or NEUTRIK® and 2 ILME multipin connectors with two latching clamps each (ILME is generally compatible with Harting). The returns are only wired to the FOH output. We supply the stagebox with common grounding (for separate grounding see the following pages).For our 19“ systems with transformer technology we normally use 1:1 transformers with MU metal shielding for optimum interference protection and a max. input of +12 dBu. The multipin 1 (FOH) receives the signals directly from the inputs and is connected to the returns, which allows 48 V phantom power supply from the FOH console, whereas multipin 2 (monitor) receives the transformerless signals (inputs only).For an advanced signal distribution, e.g. to a remote truck, we can also offer a third multipin connector with 1:1+1 transformers. We gladly accept your written orders for custom designs by fax or e-mail under support@sommercable.com. Wiring diagrams can be found under www.sommercable.com/supportFor more complex applications we recommend our modular SYSBOXX system, see the “Modular Systems“ chapter.Advantages:19“ rack, floor or wall mountProfessional workmanship and wiringLarge and clear numbering for inputs and outputsFitted with locking panel-mount metal XLR connectors from HICON or NEUTRIK®Subsequent conversion from common to separate grounding possible (max. 32 channels)Height: 4 HUApplication:Professional studio, stage or rack installationIndoor and Outdoor InstallationFloor and wall mountingConfiguration: 1 x Sommer cable Stagebox empty casing, 19“ BB-SERIES, 40 holes/1 x multipin panel hole, 6 HE, width: 483 mm, grey (BB1940N)36 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), Type D M3, nickel (NC3FDLX-M3)1 x ILME rectangle MP 24, 108-pol , Contact Insert, grey (CDDM108)1 x ILME rectangle MP 24, metal-, Add-on housing, flat, 2 clamps, grey (CHI24)1 x ILME rectangle MP 24, Protection cap with fastening rope, 4 bolts, grey (CHC24)
Variants from €1,048.00*
€1,160.00*
SYSWALL Front panel Front panel 2 x RCA stereo, colour: white

997-R-00187

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.SYSWALL front panel 2 x RCA stereo fem. <> fem. Cover plate: RAL 9010 pure white
€13.85*
SYSWALL Front panel S-VHS + 2 x RCA/S-VHS + 2 x RCA, colour: white

997-R-00191

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.Front panel: RAL 9010 pure white Front connections: 1 x s-video female, 2 x RCA female (red, white) Rear connections: 1 x s-video female, 2 x RCA female (red, white)
€15.60*
Connector Module 2 x 8 TT-Phone 4.4 mm (0.17 in.), 2 HE, 1 BE for SYS-series, colour: grey

SYC1-3501

The SYC1-3501 module brings the often presumed dead TT-Phone jack into the SYSBOXX! It will give you what many people have been seeking for so long: an ultra compact TT-Phone module which provides 16 patch points on only one width unit in the SYSBOXX format. The module can be configured via jumpers to all possible operating modes (normalization: without/half/full, grounding: fully separated/top/bottom connected). On the rear side the module relies on the full modularity of the SYSBOXX flat ribbon cable system. The large range of SYSBOXX modular boards (XLR, combo jack, DB25, multipins, Euroblock) can be easily connected via 4-pole locking tab connectors. Mechanically the sky is the limit: for rack installation the module can be integrated into the SYSPAN5XL, the PBA2-SYS12 or also into any SYSBOXX frame with 2 or more depth units.
€335.00*
Sommer cable Round Bars , Schuko socket/Multipin 1 x 16-pole male; length 2m

997-R-00176

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.ROUNDBARS FOR SPOTLIGHTSRoundbars for lighting technology (e.g. for PAR64/ PAR56 spots, compatible with stage clamps, 2“ couplers, double C hooks). The SOMMER CABLE roundbars combine the unique advantages of 48 mm round tubes (wall thickness 3 mm) with Mennekes Schuko sockets with hinged covers (115° rotated). These bars are optionally available with one or two 16-pole multipin connectors (compatible with Harting HAN E series). The power outlets are clearly numbered.All roundbars are CNC-milled from one tube, fully wired and supplied with all screws, washers and lock nuts required for fixing the spots. In addition all milled edges are bevelled. Defective components can be replaced easily as they are not welded on. The internal cable harness is insulated and protected from mechanical impacts.The ACL bars are equipped with a polarised powerCON® system and an extra failure control light for each lamp. Since ACL lamps require only 28 V operating voltage and thus can only be run in series of 8 lamps on 230 V, the RB-ACL-A-0152 will make a perfect set together with the RB-ACL-B-0152.The roundbars are also available with a black powder-coated finish at a premium – details on request.
€254.90*
Sommer cable Audio-patch panel Triax-blank panel , 1 HE, 4 mm powder-coated aluminum, colour: grey

K-TP18-45

Triax-blank panel for Damar & Hagen Triax, with 45°-installation angleTriax blank panel for Damar & Hagen Triax, 19”, made of 4 mm powder-coated aluminum, for 45° installation of the Triax fittings, graphite gray (RAL 7024), incl. label strips and fitting material for insulated fittings assembly, unloaded.
€160.00*
SOMMER CABLE Stagebox empty casing, THE BOXX, width: 195 mm, height: 511 mm, grey

TBH40-LC

THE BOXX LC 40 x A/B series, for 10 modulesWith lateral PG29 punch-out Monochrome silkscreen print 1-40Advantages:Excellent quality for the priceComfortable and precise casing assemblyOptional connection of various mulitpin connectorsApplication:Stage and live stageboxSub-distributor boxPermanent Installation
€169.99*
SYSWALL Front panel 3 x RCA YUV, colour: white

997-R-00188

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.SYSWALL front panel 3 x RCA YUV Cover plate: RAL 9010 pure white Front connections: 3 x RCA female (red, green, blue) Rear connections: 3 x RCA female (red, green, blue)
€25.50*
Mounting frame for floor tank , 2 HE, 6 BE for SYSBOXX-Module; With 50 front panel screws, colour: grey

997-01106

+++ ATTENTION: These are reduced items of the old SYSFLOOR-06 series with high bore tolerances, which complicate the attachment of the SYSBOXX sheets. +++FLOOR TANK INSERT WITH SYSTEM (modular equipping)The ideal, extremely stable mounting frame for integrating audio/video/media and domestic installation connections in floor tank connection units. SYSFLOOR is available in three different versions:1. The SYSFLOOR-06 can be fitted on 9.5”, 6+2+2 WU with up to 16 x D-flange plus, for example, 2 additional Schuko positions as required and provides optimum installation options due to the stable strain relief ring with 19 cable fixing positions.2. The SYSFLOOR-04 can accommodate up to 10 x D-flange or appropriate media interfaces on 4 WU.3. The SYSFLOOR-03 can accommodate up to 8 x D-flange or appropriate media interfaces on 3 WU.The insert size of the SYSFLOOR-03 is equal to a GB2 mounting box (or a GB3 mounting box with the SYSFLOOR-04 resp.). This makes it possible to install SYSBOXX together with domestic installation components in one box. The insert size of the SYSFLOOR-06 is equal to 3 GB3 mounting boxes. Due to the slanted connection plane the cover of the floor tank can be closed even with plugged-in multipin connectors*. Owing to the generous space conditions power supplies and active converters (or the like) can be neatly tucked away in the floor box.The mounting frames are compatible with round and square OBO BETTERMANN/ACKERMANN equipment inserts (e.g. GESR9) and fitted with fixing holes in the 5.08 mm / 0.2" spacing (for self-tapping M2.5 screws) and installation accessories. The PE connection requires an earth bolt and naked, conductive locating surfaces for the front panels. SYSFLOOR-03/-04 are supplied with 25 front panel screws, the SYSFLOOR-06 comes with 50 front panel screws. The matching front panels for individual loading are shown on the following pages.Supplied accessories: SYSFLOOR-06 Frame4x SYSFLOOR-MB mounting panel for OBO-BETTERMANN floortanksystems50x S-G2,5x08S-TS countersunk screw Torx 8 for front panels & installation parts
€139.00*
Sommer cable Round Bars , Schuko socket/Multipin 1 x 16-pole male; length 2m

997-R-00178

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.ROUNDBARS FOR SPOTLIGHTSRoundbars for lighting technology (e.g. for PAR64/ PAR56 spots, compatible with stage clamps, 2“ couplers, double C hooks). The SOMMER CABLE roundbars combine the unique advantages of 48 mm round tubes (wall thickness 3 mm) with Mennekes Schuko sockets with hinged covers (115° rotated). These bars are optionally available with one or two 16-pole multipin connectors (compatible with Harting HAN E series). The power outlets are clearly numbered.All roundbars are CNC-milled from one tube, fully wired and supplied with all screws, washers and lock nuts required for fixing the spots. In addition all milled edges are bevelled. Defective components can be replaced easily as they are not welded on. The internal cable harness is insulated and protected from mechanical impacts.The ACL bars are equipped with a polarised powerCON® system and an extra failure control light for each lamp. Since ACL lamps require only 28 V operating voltage and thus can only be run in series of 8 lamps on 230 V, the RB-ACL-A-0152 will make a perfect set together with the RB-ACL-B-0152.The roundbars are also available with a black powder-coated finish at a premium – details on request.
€277.00*
SYSWALL Front panel HDMI female / HDMI female, colour: white

997-R-00189

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.SYSWALL front panel HDMI fem. <> HDMI fem. Cover plate: RAL 9010 pure white, not usable with SWAP-1 surface box
€20.25*
Studio looms SC-Pegasus CMCK, 4 x 4 x 0.20 mm² (0.00006 sq in.) | Jack / Jack, NEUTRIK®, 6,0 m

997-R-00081

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.
€84.00*
Adapter frame for flush mounting and front panels with rounded corners , scale: 55x55x1,9 mm, plastic, colour: white

997-R-00186

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.SYSWALL adapter frame 55 x 55 x 8,5 mm rounded, matches Busch Jäger Reflex SI Legrand Serie Creo
€5.93*
Loading...
Upload in progress, please be patient ...