SYSFLOOR Floor Tank System

Products

Distribution Systems

SYSFLOOR Floor Tank System

Filter

CARDINAL DVM
OBO BETTERMANN
Sommer cable
SYSBOXX

Connector Module
Connector Module
Connector module for SYS housing series
Fixing units
Front panel
Mounting frame for floor tank
Switch-module
device, aluminum
device, plastic
device, square
front panel

RAL 9010 pure white
beige
black
grey
white

1 x D-hole
1 x D-hole, 90 ° turned
1 x D-hole centered
1 x DisplayPort fem. -> 1 x DisplayPort male 1,00m
1 x HDMI/DP
1 x HDMI fem. -> HDMI male 0,50m
1 x M20x1.5
1 x NAC3FPX
1 x NAC3PX
1 x PG21
1 x SBC22-3SP
1 x SCHUKO
1 x SUB-D09 or HDMI + 2 x Keystone 90° angled
1 x punch 28.4x28.4
1x DISPLAYPORT female 1x DP cable connector, L=0,5m
1xLNL8+2xNL4
1x VGA female + 1x 3,5mm jack socket > 1x VGA cable plug, L=1,00m + 2x cinch cable socket, L=0,15m
1x VGA female + 1x 3.5mm jack female, stereo + 1x HDMI female > 1x VGA cable socket, L=0.20m + 1x 3.5mm jack cable socke
2 x 8 TT-Phone 4.4 mm (0.17 in.)
2 x 70 mm rail suitable for up to 9 TE automaton each 17.5mm -for use with SYP2 profile
2 x Antenna socket
2 x Cutouts for clip-in modules (Keystrone)
2 x D-SUB 25-pol
2 x D-Series cutout, 90° angled
2 x D-hole
2 x Keystone
2 x NAC3FPX
2 x opticalCON
2xRCA fem. fem. white-red
3 x 2P+T female -> Wieland GSD18 female, cascadable
3 x 2P+T female SNAP-In
3 x Cutouts for clip-in modules (Keystrone)
3 x Keystone
3 x NL8
3 x RCA female patch A/V
3 x RCA female patch YUV
3 x Schuko-SNAP-In-Hole
3 x Schuko female -> Wieland GST18i3 female, cascadable
3 x snap-in Schuko socket black
3 x snap-in Schuko sockets
3 x snap-in Schuko socket white
3 x socket swiss standard snap-in
6 x D-SUB25
6 x punch 24,2x7,5
6 x punched holes for KEYSTONE
8 x A / B-Hole
8 x punch for NEUTRIK A/B type
10 x D-flange
12 x 3-pole EUROBLOCK 3.5 mm (1/8“)
16xTTPhone
70 mm rail fits 4TE automaton each 17.5mm
CEE5-Hole
Cable feed Ø =12 mm
D-Series cutout - angled
DVI24+5 + 3,5 mm stereo jack fem. -> 0,15m cable DVI + 2 x RCA fem.
DVI24+5 + 3,5 mm stereo jack fem. -> 0,15m cable DVI + 3,5 mm stereo jack fem.
DVI 24+5 + 3.5 mm stereo mini jack fem. -> Plug-in / screw terminal
DVI insert
Displayport female —> Displayport-installation female
Front panel, gray RAL7016, HDMI, VGA mini jack HDBaseT
Front panel, pure white RAL9010, HDMI, VGA mini jack HDBaseT
Front panel, white aluminum RAL9006, HDMI, VGA mini jack HDBaseT
HDMI / VGA cut out
HDMI fem. —> Plug-in / screw terminal
HDMI female -> 0,15m cable HDMI female
HDMI female Patch
HDMI female —> HDMI male 0,30 m
Hole for NL4, NL8MPR, EP, LK08
Module for opening diameter of 3 x snap-in socket D=50mm
NL8MDV -> 6.3 mm push-on blade con.
PG21-Hole
Rear side with WIELAND gesisCON GST18i3 │Fit-in plug + socket, contact protected
Switch on / off + stereo volume -> solder contacts
Type G (BS 1363)
USB 2.0 fem. -> 4-pin screw terminal.
VGA + 3,5 mm stereo jack fem. -> 0,2m cabel 5xBNC + 3,5 mm stereo jack fem.
VGA + 3,5 mm stereo jack fem. -> 0,2m cabel VGA + 3,5 mm stereo jack fem.
VGA + 3,5 mm stereo jack fem. -> 0,2m cable 5xBNC + 2x RCA fem.
VGA + 3,5 mm stereo jack fem. -> 0,15m cable VGA + 2 x RCA fem.
VGA + 3,5 mm stereo jack fem. -> VGA patch + 0,15m cabel 2x RCA fem.
VGA + 3,5 mm stereo mini jack fem. -> Patch VGA + 0.15 m breakout cable 3.5 mm stereo mini jack fem.
VGA fem. + 3.5 mm stereo mini jack fem. -> Plug-in / screw terminal
VGA fem. -> 0,2 m break out cable VGA fem. + 3,5 mm stereo jack fem. -> 0,15 m break out cable + HDMI female -> 0,2 m br
blank panel
powerCON T1 (NAC3FPX)
powerCON T1 DUPLEX (NAC3PX)

Designed for HDMI & DP breakout cables and HDMI or USB-board modules
GESRA9/10U
Hole assembly suitable for SYFB23-8D!
SYS-series
SYSBOXX-Module
Suitable for 2 x NEUTRIK® NAC3FPX powerCON® TRUE1
for SYKP SYSBOXX cassette profile
for SYPK SYSBOXX cassette profile
for receiving a 2-hole antenna socket from the W45 series
for use with SYP2 profile
in combination with a SYSTRUNK or SYSBOXX enclosure for individual speaker box constructions
only for cicuit board module SBC22-3SP
suitable 1x NEUTRIK® NAC3FPX powerCON® TRUE1
suitable 1x NEUTRIK® NAC3PX powerCON® TRUE1

Minimum €

–

Maximum €

front panel blank panel, 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB21-L

Please order screws separately

€15.45*

front panel 2 x D-hole, 2 HE, 1 BE for SYS-series, 2.5 mm galvanized steel sheet, colour: grey

SYFB21-2D0

€17.50*

front panel 2 x D-Series cutout, 90° angled, 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB21-2D

Please order screws separately

€17.50*

front panel 2 x Cutouts for clip-in modules (Keystrone), 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB21-2KEYSTONE

Please order screws separately

€30.00*

front panel blank panel, 2 HE, 3 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB23-L

Please order screws separately

€19.00*

front panel blank panel, 2 HE, 6 BE for SYS-series, colour: grey

SYFB26-L

Please order screws separately

€25.00*

front panel 3 x Cutouts for clip-in modules (Keystrone), 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB21-3KEYSTONE

Please order screws separately

€30.00*

front panel 1 x D-hole, 2 HE, 1 BE for SYS-series, 2.5 mm galvanized steel sheet, colour: grey

SYFB21-1D0

€22.00*

Mounting frame for floor tank , 2 HE, 6 BE for SYSBOXX-Module; With 50 front panel screws, colour: grey

SYSFLOOR-06

FLOOR TANK INSERT WITH SYSTEM (modular equipping)The ideal, extremely stable mounting frame for integrating audio/video/media and domestic installation connections in floor tank connection units. SYSFLOOR is available in three different versions:1. The SYSFLOOR-06 can be fitted on 9.5”, 6+2+2 WU with up to 16 x D-flange plus, for example, 2 additional Schuko positions as required and provides optimum installation options due to the stable strain relief ring with 19 cable fixing positions.2. The SYSFLOOR-04 can accommodate up to 10 x D-flange or appropriate media interfaces on 4 WU.3. The SYSFLOOR-03 can accommodate up to 8 x D-flange or appropriate media interfaces on 3 WU.The insert size of the SYSFLOOR-03 is equal to a GB2 mounting box (or a GB3 mounting box with the SYSFLOOR-04 resp.). This makes it possible to install SYSBOXX together with domestic installation components in one box. The insert size of the SYSFLOOR-06 is equal to 3 GB3 mounting boxes. Due to the slanted connection plane the cover of the floor tank can be closed even with plugged-in multipin connectors*. Owing to the generous space conditions power supplies and active converters (or the like) can be neatly tucked away in the floor box.The mounting frames are compatible with round and square OBO BETTERMANN/ACKERMANN equipment inserts (e.g. GESR9) and fitted with fixing holes in the 5.08 mm / 0.2" spacing (for self-tapping M2.5 screws) and installation accessories. The PE connection requires an earth bolt and naked, conductive locating surfaces for the front panels. SYSFLOOR-03/-04 are supplied with 25 front panel screws, the SYSFLOOR-06 comes with 50 front panel screws. The matching front panels for individual loading are shown on the following pages.Supplied accessories: SYSFLOOR-06 Frame4x SYSFLOOR-MB mounting panel for OBO-BETTERMANN floortanksystems50x S-G2,5x08S-TS countersunk screw Torx 8 for front panels & installation parts

€203.00*

front panel 1 x D-hole centered, 2 HE, 1 BE for SYS-series, 2.5 mm galvanized steel sheet, colour: grey

SYFB21-1DM-M3

Miscellaneous:Connector vertical (0°)2 x M3 thread for connector front mounting

€22.00*

front panel 1 x SCHUKO, 2 HE, 2 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB22-SCHUKO

€18.00*

Connector Module 3 x snap-in Schuko sockets, 2 HE, 4 BE for SYS-series, colour: grey

SYC4-4025

Please order screws separately

€61.00*

Connector Module HDMI female -> 0,15m cable HDMI female, 2 HE, 1 BE for SYS-series, colour: grey

SYC1-1158

Please order screws separately

€58.50*

front panel D-Series cutout - angled, 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB21-1DA

Versions update September 2020: The panel is now equipped with four additional countersunk holes for combination with the SYSBOXX cassette profile.Please order screws separately

€26.00*

front panel PG21-Hole, 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB21-PG21

Please order screws separately

€18.30*

Connector Module powerCON® T1 (NAC3FPX), 2 HE, 1 BE for SYS-series, colour: grey

SYC1-1436

€45.90*

front panel 1 x NAC3FPX, 2 HE, 1 BE for SYS-series, 2.5 mm galvanized steel sheet, colour: grey

SYFB21-NAC3FPX

€24.50*

front panel 2 x opticalCON®, 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB21-2NO

Please order screws separately

€17.50*

Mounting frame for floor tank , 2 HE, 4 BE for SYSBOXX-Module; with 25 front panel screws, colour: grey

SYSFLOOR-04

FLOOR TANK INSERT WITH SYSTEM (modular equipping)The ideal, extremely stable mounting frame for integrating audio/video/media and domestic installation connections in floor tank connection units. SYSFLOOR is available in three different versions:1. The SYSFLOOR-06 can be fitted on 9.5”, 6+2+2 WU with up to 16 x D-flange plus, for example, 2 additional Schuko positions as required and provides optimum installation options due to the stable strain relief ring with 19 cable fixing positions.2. The SYSFLOOR-04 can accommodate up to 10 x D-flange or appropriate media interfaces on 4 WU.3. The SYSFLOOR-03 can accommodate up to 8 x D-flange or appropriate media interfaces on 3 WU.The insert size of the SYSFLOOR-03 is equal to a GB2 mounting box (or a GB3 mounting box with the SYSFLOOR-04 resp.). This makes it possible to install SYSBOXX together with domestic installation components in one box. The insert size of the SYSFLOOR-06 is equal to 3 GB3 mounting boxes. Due to the slanted connection plane the cover of the floor tank can be closed even with plugged-in multipin connectors*. Owing to the generous space conditions power supplies and active converters (or the like) can be neatly tucked away in the floor box.The mounting frames are compatible with round and square OBO BETTERMANN/ACKERMANN equipment inserts (e.g. GESR9) and fitted with fixing holes in the 5.08 mm / 0.2" spacing (for self-tapping M2.5 screws) and installation accessories. The PE connection requires an earth bolt and naked, conductive locating surfaces for the front panels. SYSFLOOR-03/-04 are supplied with 25 front panel screws, the SYSFLOOR-06 comes with 50 front panel screws. The matching front panels for individual loading are shown on the following pages.Supplied accessories:SYSFLOOR-04 Frame SYSFLOOR-04 Grip guard plate2 x SYSFLOOR-MB Mounting clip für OBO-BETTERMANN Floortanksystems15 x S-G2,5x08S-TS thread grooving screw for Frontplate & mounting parts

€109.00*

front panel Cable feed Ø =12 mm, 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB21-1KD

Please order screws separately

€38.50*

front panel 1 x D-hole, 90 ° turned for for SYKP SYSBOXX cassette profile, 2.5 mm galvanized steel sheet, colour: grey

SYPFB1-1D

€19.30*

Mounting frame for floor tank , 2 HE, 3 BE for SYSBOXX-Module; with 25 front panel screws, colour: grey

SYSFLOOR-03

FLOOR TANK INSERT WITH SYSTEM (modular equipping)The ideal, extremely stable mounting frame for integrating audio/video/media and domestic installation connections in floor tank connection units. SYSFLOOR is available in three different versions:1. The SYSFLOOR-06 can be fitted on 9.5”, 6+2+2 WU with up to 16 x D-flange plus, for example, 2 additional Schuko positions as required and provides optimum installation options due to the stable strain relief ring with 19 cable fixing positions.2. The SYSFLOOR-04 can accommodate up to 10 x D-flange or appropriate media interfaces on 4 WU.3. The SYSFLOOR-03 can accommodate up to 8 x D-flange or appropriate media interfaces on 3 WU.The insert size of the SYSFLOOR-03 is equal to a GB2 mounting box (or a GB3 mounting box with the SYSFLOOR-04 resp.). This makes it possible to install SYSBOXX together with domestic installation components in one box. The insert size of the SYSFLOOR-06 is equal to 3 GB3 mounting boxes. Due to the slanted connection plane the cover of the floor tank can be closed even with plugged-in multipin connectors*. Owing to the generous space conditions power supplies and active converters (or the like) can be neatly tucked away in the floor box.The mounting frames are compatible with round and square OBO BETTERMANN/ACKERMANN equipment inserts (e.g. GESR9) and fitted with fixing holes in the 5.08 mm / 0.2" spacing (for self-tapping M2.5 screws) and installation accessories. The PE connection requires an earth bolt and naked, conductive locating surfaces for the front panels. SYSFLOOR-03/-04 are supplied with 25 front panel screws, the SYSFLOOR-06 comes with 50 front panel screws. The matching front panels for individual loading are shown on the following pages.Supplied accessories:SYSFLOOR-03 Frame SYSFLOOR-03 Grip guard plate2 x SYSFLOOR-MB Mounting clip für OBO-BETTERMANN Floortanksystems15 x S-G2,5x08S-TS thread grooving screw for Frontplate & mounting parts

€116.00*

front panel 1 x D-hole, 90 ° turned, 2 HE, 1 BE for SYS-series, 2.5 mm galvanized steel sheet, colour: grey

SYFB21-1D-KP

€23.50*

front panel 2 x D-hole, 2 HE, 1 BE for SYS-series; Connectors vertically aligned, 2.5 mm galvanized steel sheet, colour: grey

SYFB21-2D0-M3

€22.00*

front panel 1 x D-hole centered, 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB21-1DM

Please order screws separately

€22.00*

front panel 10 x D-flange, 2 HE, 4 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB24-10D

Please order screws separately

€43.90*

front panel Hole for NL4, NL8MPR, EP, LK08, 2 HE, 2 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB22-SP

Please order screws separately

€27.00*

Connector Module 3 x Schuko female -> Wieland GST18i3 female, cascadable, 2 HE, 4 BE for SYS-series, colour: grey

SYC4-4096

Please order screws separatelyNon-compatible with the SYSTRUNK series and the SYSFLOOR-03/-04 (alternatively please use SYC4-4025 + 3 x SCHU-BSNG here)

€110.00*