One thick coat...Protects the inner structure against mechanical strain such as pulling, tearing and knotting. This is why we gave STAGE 22 a thick outer jacket of 6,40 mm. But also the electrical values and the technical construction are very presentable: the STAGE 22 has a low capacitance and high bending cycles, provided by the super thin, tightly stranded single wires. The shielding of bare Cu wires has an optical coverage of 99 % (instead of the otherwiseusual 85 %). The STAGE 22 is therefore the ideal cable for stage, homerecordists, renters and ELA technicians. The STAGE 22 is a very inexpensive cable, but you won't have to accept any trade-offs.Advantages:High transmission quality due to the usw of fine strandingVery rugged owing to the thick, soft PVC jacketGood shielding due to dence helical copper mesh screenHigh flexibility makes it easy to reelAffordable priceApplication:Stage applicationHome recording

Swinging with your girlfriend...like Tarzan in the jungle. With this cable you could just do that: it can take a lot of tugging, bending, and rough wear and tear. This is important when installing it in sharp-edged lighting trusses.The Binary 234 AES/EBU MKII is an outstanding cable for the transmission of digital signals in the 110 Ω AES/EBU and DMX data format. Its shielding is provided by an aluminum-vaporised fleece and a helical copper mesh screen with 100 % coverage. So it offers a very good protection against electric and magnetic interferences. This cable ensures an error-free data transfer over distances of up to 1000 metres. With the Binary 234 AES/EBU MKII you’ll be on the safe side.Advantages:AES/EBU- and DMX-conformant, highly flexibleVery good shielding due to the use of a helical copper mesh screen plusan aluminium-vaporised fleeceExtremely rugged due to the special tough jacketOnly a little more expensive than a standard microphone cableApplication:Networking of scanners, lighting systems, digital mixing consoles etc.For indoor and outdoor installationConnection of digital audio amplifiers, DAT recorders etc.

No blood running through those veins...but yet a whole lot of life. A wire gauge of 2 x 0,34 mm² is impressive and the electrical data speaks for itself. A cable that provides great performance data at an excellent price, used for stage and studio settings. The large cross section and the low capacitance guarantee outstanding transmission quality, even over longer distances. The shielding, made of bare copper wires has a 95 % optical coverage (instead of the usual 85 %). The robust, rubberlike, matt outer sleeve is preferred by performing musicians and guarantees outstanding flexibility even in lowest temperatures.Advantages:High transmission quality through the use of oxygen-free copper stranding with a large wire gauge of 2 x0,34 mm²Very low capacitance due to PE insulationGood shielding due to the dense Cu mesh screenHigh flexibility makes it easy to reelApplication:Stage applicationStudio operationPermanent Installation

When the lights begin to dance...the people stare in wonder! But there is quite a bit of technology behind it. And cables do not play the least important part here. The power for the spotlights and the control signals for their movements must be transmitted via cables. Both cables are combined in a robust cable hose, providing the input lead for the lighting desk and other DMX 512-equipped control devices. The SC-Monolith 1 POWER/DMX consists of a 3 x 1.50 mm² power cable and one DMX 512 line. Each DMX wire pair is shielded by a tinned helical copper mesh. The power cable was developed in compliance with VDE and has its own jacket for extra safety. Of course the AES/EBU cable can also be used as a microphone cable or as a feed line for active loudspeaker systems.Advantages:Parallel control for lighting boards through one cable via power line and DMX signalVery flexible and enormously tread-resistant due to the round jacket made of cotton and viscoseVery good pairwise shielding of the DMX lines due to tinned helical copper mesh screen or copper braidingMiscellaneous:Note: two white filling elements are integrated in the cable (see cable illustration)Application:Control line for DMX lighting consoles (wave impedance of 0 Ω)Analogue + digital audio multipair with power supply

A true allrounder...because it could not be any longer, faster or more flexible. The SC-Quantum QMC is just the cable that all “bending radius fetishists“ like event technicians, musicians and ambitious live sound people have always been dreaming of! The SC-Quantum QMC is absolutely torsionfree, i.e. it can be wound in a figure of “8“ easily and will not twist when winding or unwinding it.Not only the S-PVC-jacket, which is cold-resistant down to –30 °C and notch-resistant, feels soft – due to thesuperfine 0.07 mm (!) individual copper litz and the PE-insulated wire insulation, even the interior is wonderfully supple and unbreakable. From the 8-pair version upward we have included an extra yellow/green protective earth wire to provide for added stability and safety (PE = protective earth).The electrical and mechanical data are likewise remarkable: each wire pair is additionally tube-insulated, numbered and shielded by a helical Cu mesh screen with a 99 % coverage.Go figure this: the SC-Quantum QMC stands out with its low 45 pF wire/wire capacitance and will remain 110 Ω (AES/EBU) conform for several hundred metres!The wire pair diameter is perfectly suitable for directmounting (e.g. of an XLR connector). The interior isprotected against adverse influences by a highly flexiblePVC jacket with a wall thickness of almost 2 mm.There has never been a cable with such electrical andmechanical values for such a low price!Advantages:Each wire pair is individually insulated and shielded by a helical Cu mesh ( coverage)Very low wire/wire capacitanceHighly flexible and reelable without twistingIn compliance with AES/EBU ()Affordable priceApplication:Professional stage and live multicore for separate or central earthingCreation of highly flexible studio looms, analogue and digitalPermanent Installation

The memory cable...Will get things in order. In switching cabinets and racks it often looks like on grandma's knitting pattern. Tidiness is indispensable. The SC-Isopod SO-F22 is a 2-wire, foil-shielded cable with a compact outer diameter of 3,30 mm. The cable is primarily used for the internal wiring in audio and hi-fi components. It has a “memory effect“ and can be laid “around the corner“ easily. The Cu wires of the individual wire pairs are already pre-stranded and very easy to strip. For a simpler assembly, the cable has an additional pre-stranded, tin-plated drain wire. It is shielded by an AL/PT foil that will automatically stick on the jacket when stripping it.Advantages:Quick and easy to handleRobust plastic jacket for long lifeEasy to lay thanks to “memory effect”Application:Internal wiring of racks, audio and hifi components

The marathon runner...Will have a hard time and must run. Likewise our cables must cover the long distances at the sports arena. But they will lie and not run. So due to its cross-section 2 x 0,50 mm², this cable is also ideal for theaters, public buildings, etc. Owing to the 100 % shielding and the thick outer jacket, the SC-Primus is also recommended for installations at discotheques, because neither the aggressive nicotine nor wild temperature fluctuations can hardly do any harm to this cable. Gigging musicians swear by this cable, rental shop owners prefer the SC-Primus because of its durability and a slight bounce, making manual winding easy.Advantages:Optimum transmission quality even with excess lengths due to the large wire gauge of 2 x 0,50 mm²100 % shielding due to dense helical copper mesh screen and extra metallised fleeceGreat durability due to the thick PVC with a diameter of 6,70 mmEasy to reel and good tensile strengthApplication:Broadcasting and OB van technology, building installationProfessional studio technologyTough stage applicationInstallation in discos, coffee shops, at sporting events

This midget...With its 2,60 mm of diameter it fits in all places with limited space. The SC-Cicada SO-D14 was originally developed by us as a quality switching line for the internal wiring in racks or audio components. But after extensive tests at various microphone companies, they soon recognized the outstanding technical and electrical specifications of the cable. In the meantime the SC-Cicada SO-D14 can be found on a lot of clip and ear microphones, headphones, and speech units. The SC-Cicada SO-D14 is particularly valued for its extremely high flexibility, the tight spiral braid and the pre-stranded and tin-plated drain wire, which gives this cable an additional kink protection and tear strength. You are a maker of high-grade audio components? Then wire up your devices with this cable! Its low noise and shielding will excite you! With a notch-proof and temperature resistant PUR jacket!Advantages:Highly flexible because of its fine single litz designEasy to handle owing to the extra drain wire (0.22 mm²)Superb shielding due to the tight helical mesh screen with 95 % coverageDurable and notch-resistant due to the sturdy PUR jacketApplication:Interior wiring of mixing consoles, racks, and other audiocomponentsFlexible cable for clip-on microphones, earphones, speaker units, etc.Assembly of adapter cable

No less, but lesser...and easy to handle since it is available in four colors. Otherwise the technical and electrical construction is similar to the SC-SOURCE cable.With its the small diameter it fits virtually all current TT-phone and B-gauge connectors and can also be used for Y-adapter cables. Due to its carefully designed shielding the cable offers the extra benefit of an amazing tread resistance and tensile strength. The white version is recommended for the unobtrusive installation in churches.Advantages:Ideal for patch cables owing to its small outside diameter of 4.6 mmVery good tensile strength due to the dual shielding construction and specialPVC jacketLinear sound transmission due to the special-designed conductor pairs and thecopper wire stranding100 % shielding due to a metallised fleece plus additionalhelical copper mesh screenApplication:Professional studio patch connectionHigh-quality mini microphone cableHigh-class phono and RCA connectionsLong-distance MIDI cablingInterior rack wiring and connection of audio components and effects devices

The hymns of praise by cable...Specialists make this cable a top seller. This microphone cable was originally developed for the makers of studio microphones. Their high quality standards helped us produce a professional and yet affordable studio microphone cable. SC-Source MKII is 100 % shielded by a tight Cu braid and a robust fleece woven around the wire pairs. The fleece is vaporized on both sides with a conductive aluminum coating. This ensures that even with heavy-duty use the 100 % shielding remains unchanged. This cable should be used where electric sources can affect the audio and data transfer. Cables with comparable electrical values cost almost twice as much with other manufacturers! Due to the fine 0.05 mm Cu wires it is a very popular cable for outdoor transmissions and mobile applications.Advantages:Neutral and loss-free audio transmission due to special copper strand design100 % shielding due to dense helical copper mesh screen plus extra AL fleece/AL foilProfessional technology at a budget priceAvailable in a notch- and cold-resistant PUR versionApplication:Professional studio and microphone technologyOutdoor transmission/OB vanPermanent stage application

Almost as old as Methuselah...that’s the SC-Mistral MCF multipair. We have been making it for almost 10 years using the same proven technology. The SC-Mistral MCF features the pairwise PVC insulation, as it is usual for studio cores. It has a hardwearing number overprint plus an extra colour-coding in steps of 8.The wire pairs of the SC-Mistral MCF have a pre twisted drain wire and another shielding made of AL/PT compound foil. For added protection against corrosion and oxidation both the conductors and the drain wire have been tinned. The cable is particularly easy to handle because the AL/PT foil will stick to the outer jacket when stripping. The SC-Mistral MCF is very easy to lay and reel. We also recommend it for the assembly of multicore adapters. Here the XLR and jack connectors can be mounted directly on the PVC jacket.Advantages:Additional insulation for each wire pair with a numbered and colour-coded PVC sleeveVery flexible and tread-resistant owing to the use of a rubberlike jacket materialSimple and fast handling due to the use of compound foil and a pre-twisted drain wireHigh bending cycles due to the tightly stranded Cu wiresReturns on the cable splice are instantly recognisable by the colour coding on the conductor pairsHigh transmission quality even with excess distances (low capacitance!)Affordable priceApplication:Ideal for studio installation and permanent installationFixed installation in theatres, public buildings etc.Construction of dependable cable reel systems

One step forward, one step back...Round and round, this ain't too hard. When data have to pass to and fro, a digital cable with return channel should be used. The wave impedance is also defined as 110 Ω with this cable. Of the 4 wires 2 are employed for the feedback function. The robust outer jacket is suitable for outdoor and fixed installations alike. Color coding according to DIN 47100. Owing to the double shielding (AL/PT foil + Cu braid) and the wire coding it complies with the generally applicable regulations (VDE 0812/VDE 0207). Transfer speed 256 Kbs pursuant to EIA 485 standard.Advantages:Digital transmission over long distances due to the DMX and AES/EBU standardsExcellent protection against electric interference (Cu mesh screen + AL/PT foil)Extremely robust due to the special tough jacketApplication:Networking of scanners and lighting systems with check-back functionConnection of digital control units and devices of all kinds

Swinging with your girlfriend...like Tarzan in the jungle. With this cable you could just do that: it can take a lot of tugging, bending, and rough wear and tear. This is important when installing it in sharp-edged lighting trusses.The Binary 234 AES/EBU MKII is an outstanding cable for the transmission of digital signals in the 110 Ω AES/EBU and DMX data format. Its shielding is provided by an aluminum-vaporised fleece and a helical copper mesh screen with 100 % coverage. So it offers a very good protection against electric and magnetic interferences. This cable ensures an error-free data transfer over distances of up to 1000 metres. With the Binary 234 AES/EBU MKII you’ll be on the safe side.Advantages:AES/EBU- and DMX-conformant, highly flexibleVery good shielding due to the use of a helical copper mesh screen plusan aluminium-vaporised fleeceExtremely rugged due to the special tough jacketOnly a little more expensive than a standard microphone cableApplication:Networking of scanners, lighting systems, digital mixing consoles etc.For indoor and outdoor installationConnection of digital audio amplifiers, DAT recorders etc.

Swinging with your girlfriend...like Tarzan in the jungle. With this cable you could just do that: it can take a lot of tugging, bending, and rough wear and tear. This is important when installing it in sharp-edged lighting trusses.The Binary 234 AES/EBU MKII is an outstanding cable for the transmission of digital signals in the 110 Ω AES/EBU and DMX data format. Its shielding is provided by an aluminum-vaporised fleece and a helical copper mesh screen with 100 % coverage. So it offers a very good protection against electric and magnetic interferences. This cable ensures an error-free data transfer over distances of up to 1000 metres. With the Binary 234 AES/EBU MKII you’ll be on the safe side.Advantages:Very good shielding due to the use of a helical copper mesh screen plusan aluminium-vaporised fleeceExtremely rugged due to the special tough jacketOnly a little more expensive than a standard microphone cableApplication:Networking of scanners, lighting systems, digital mixing consoles etc.For indoor and outdoor installationConnection of digital audio amplifiers, DAT recorders etc.

One thick coat...Protects the inner structure against mechanical strain such as pulling, tearing and knotting. This is why we gave STAGE 22 a thick outer jacket of 6,40 mm. But also the electrical values and the technical construction are very presentable: the STAGE 22 has a low capacitance and high bending cycles, provided by the super thin, tightly stranded single wires. The shielding of bare Cu wires has an optical coverage of 99 % (instead of the otherwiseusual 85 %). The STAGE 22 is therefore the ideal cable for stage, homerecordists, renters and ELA technicians. The STAGE 22 is a very inexpensive cable, but you won't have to accept any trade-offs.Advantages:High transmission quality due to the usw of fine strandingVery rugged owing to the thick, soft PVC jacketGood shielding due to dence helical copper mesh screenHigh flexibility makes it easy to reelAffordable priceApplication:Stage applicationHome recording

When the lights begin to dance...the people stare in wonder! But there is quite a bit of technology behind it. And cables do not play the least important part here. The power for the spotlights and the control signals for their movements must be transmitted via cables. Both cables are combined in a robust cable hose, providing the input lead for the lighting desk and other DMX 512-equipped control devices. The SC-Monolith 2 POWER/DMX consists of a 3 x 1.50 mm² power cable and two DMX 512 lines. Each DMX wire pair is shielded by a tinned helical copper mesh. The power cable was developed in compliance with VDE and has its own jacket for extra safety. Of course the AES/EBU cable can also be used as a microphone cable or as a feed line for active loudspeaker systems.Advantages:Parallel control for lighting boards through one cable via power line and DMX signalVery flexible and enormously tread-resistant due to the round jacket made of cotton and viscoseVery good pairwise shielding of the DMX lines due to tinned helical copper mesh screen or copper braidingApplication:Control line for DMX lighting consoles (wave impedance of 110 Ω)Analogue + digital audio multipair with power supply

The sound director...Sets the tone and our cable may also be called such a “leading lead“. The audio engineer's cable is a very sophisticated top-level microphone cable. Two wires are paired for optimum sound. This improves the crosstalk behavior. In studios the cable is primarily used for phantom power or noise suppression (for optimum noise values the cable should be wired in crossover mode, i.e. the opposing wires RED/WHITE and BLUE/YELLOW are combined). A tight Cu spiral screen plus an extra metallized fleece foil ensure an outstanding shielding. Owing to its elaborate construction this cable is also often found in exquisite hi-fi studios where it appeals with its homogeneous and linear sound image. If you don't want to accept any sonic or electric compromises at your studio, this cable is the way to go!Advantages:Extremely noise-free due to the crossover connection of the 4 single wiresSuitable as a phantom power supply and stereo cable due to its 2 extra conductorsVery good transmission safety and linear sound transmissionExtremely robust and good tensile strength due to the thick PVC jacket100 % shielding owing to dense helical copper mesh screen plus additionalmetallised fleece foilApplication:Professional studio and microphone technologyConnection of effects and control units which require a return signalProfessional MIDI-technology, transfer cableHigh-end connection of hifi components

The moon has risen...and if only the little golden stars are twinkling in the sky? Light failure! Power failure! The total failure is every technician's nightmare. The cause for this are external interference fields, which in turn are caused by badly shielded cables. So this is no place to make savings on material and shielding. Hence this cable with its soft jacket and the 100 % shielding. And all this with only 5,00 mm of outer diameter. This cable is the perfect AES/EBU line for studio engineering. It's ideal for patching or for internal wirings. Where no extreme environmental influences occur, it can also be used for permanent long-distance laying. The surge impedance of 110 Ω guarantees a loss-free transmission of digital signals. Likewise the SC-Semicolon 2 AES/EBU is fully shielded by the use of a tight Cu spiral screen and the underlying AL/PT foil or AL fleece.Advantages:Perfect shielding by a dense helical copper mesh screen + AL/PT foil or AL fleeceCompact and hence space-savingApplication:Professional studio and microphone technologyConnection of effects and control units which require a return signalIndustrial technology and medical engineeringProfessional MIDI-technology, transfer cableHigh-end connection of hifi componentsControl of lighting and scanner systems and displays

Same procedure as every...new cable designs are boiled up in the studio technology sector to impress the users. Solid wires are readily used as inner conductors, with enhanced conductivity of the surface layer and a stranding technique for improved audio transmission. This is only true in theory, because a solid wire has a lot of drawbacks. It is so hard that the insulation can be damaged even with little movements, and it is barely ductile which means that already with slight bendings the Cu surface can be bulged. Tensile forces acting upon the connector pins must not be underestimated either. To overcome those problems SOMMER CABLE has developed the new SC-Carbokab 225 with a conductor smoothing of highly compressed carbon that is directly applied to the concentrically stranded wires. It offers the same electrical benefits like a solid wire, yet stays flexible and guarantees consistent, excellent values. The good transmission properties of the SC-Carbokab 225 also provide an absolutely linear sound image over long distances of up to 200 metres. The shielding with 100 % optical coverage (AL fleece + copper mesh screen) is important, because you will hardly find more interference signals coming from peripheral units (effects devices, computers, synthesizers, etc.) than in the professional studio. For the insulation we use a special HD-PP to ensure lowest capacitance values. With this cable you are “state-of-the-art“ and can avoid tiresome “esoteric“ discussions in the future!Advantages:Linear audio transmission due to carbon conductor smoothing to emulate thebenefits of a solid wireLow capacitance due to the use of the HD-PP high-end insulating materialExcellent shielding with Cu mesh screen (+ drain wire) and AL fleeceHigh conductivity due to the use of OFC 6 (oxygen-free class 6) copperApplication:Highly professional studio and installation technologyDemanding OB van technology for radio and broadcastingFirst-class hifi connection (red and white conductors on pin 1, separate shielding)

One thick coat...Protects the inner structure against mechanical strain such as pulling, tearing and knotting. This is why we gave STAGE 22 a thick outer jacket of 6,40 mm. But also the electrical values and the technical construction are very presentable: the STAGE 22 has a low capacitance and high bending cycles, provided by the super thin, tightly stranded single wires. The shielding of bare Cu wires has an optical coverage of 99 % (instead of the otherwiseusual 85 %). The STAGE 22 is therefore the ideal cable for stage, homerecordists, renters and ELA technicians. The STAGE 22 is a very inexpensive cable, but you won't have to accept any trade-offs.Advantages:High transmission quality due to the usw of fine strandingVery rugged owing to the thick, soft PVC jacketGood shielding due to dence helical copper mesh screenHigh flexibility makes it easy to reelAffordable priceApplication:Stage applicationHome recording

Two friends we must be...and fit into two connectors. Or into three - or why not even four? You can do a lot with this cable. But primarily it will be used as a stereo cable for microphones and for manufacturing RCA and Y-patch cables. Each of its wire pairs is protected individually by a tight helical shielding with 95 % coverage and can be separated anytime. The single line will fit into every jack, XLR, and RCA connector.Advantages:Highly flexible due to the use of a cold-resistant and soft PVC jacketMultiple applications, as the individual wires can be separated anytimeApplication:Wiring of stereo microphonesAssembly of insert cable

We stomp on it...with our SC-Octave Tube which has been custom-designed for the connection of tube microphones or remote-controlled studio microphones. It has a total of 7 conductors, two for the supply voltage and the others for parameter-variable directivity, sensor (measuring) line, heating, and the voltage supply for the tube capsule. These five conductors consist of 72 superfine 0.05 mm single wires and guarantee a linear transmission and high flexibility.Owing to its 100 % coverage shielding (helical copper mesh screen + AL fleece) the SC-Octave Tube is perfectly protected against all kinds of interference.It is ideal for connecting Neumann, BPM, or Schoeps microphones.Advantages:Audio and power signal in one cable100 % interference protectionHigh-quality, linear transmissionHighly flexibleApplication:Connection of tube microphonesAlso usable as a high-quality control line

Through thick and thin...the new SC-Scuba 14 HIGHFLEX will be right by your side. It is very thin, space-saving, flexible and ideally suited for connectors with a small diameter, e.g. LEMO patchboards, mini jacks, RCA etc. (and thus perfect for patch cables) and rack cabling. Their diameter and wire construction has been designed according to common broadcasting standards and a dense copper mesh screen with90 % shielding coverage protects the cable from interference. For reasons of clarity we offer the SC-Scuba 14 HIGHFLEX in five different jacket colors.Advantages:Very thin, high tensile strength and flexibilityAvailable in five different coloursGood shielding due to the dense Cu mesh screenAffordable priceApplication:Patch cabling (LEMO), gooseneck microphone cableHome recordingRack and console cabling

It brings colour to your life...for the SC-KOLORITH is the perfect cable for use with low-voltage/IntelligentDC loudspeaker products from MEYER SOUND, building installation systems on BUS basis as well as for connecting colour changers. The SC-KOLORITH transmits data and power supply in one line. The pairwise stranded data line (wave impedance 110 Ω) is shielded and, due to the use of fine, tinned 0.10 mm single wires, guarantees high bending cycles. With 2 mm² the two voltage supply wires are ideally dimensioned for the transmission of voltages up to 50 V with low power losses.Advantages:Connection of building services engineering systems over distances of up to 1000 mAlso suitable as audio/speaker hybrid cableVery compact, flexible and easy to useApplication:For connecting colour changersFor installation purposes (Studio, illumination, building services engineering)Outdoor installation applicationsFor connecting low-voltage / intelligent DC products made by Meyer Sound

Swinging with your girlfriend...Swinging through the jungle like Tarzan. Literally, one could do it with this cable. Briefly: it can take a lot, whether by strain, by hook or crook. This is important when it is laid in sharp-edged lighting trusses. The Binary 234 AES/EBU MKII is an excellent cable for the transmission of digital signals in the 110 Ω AES/EBU and DMX data format. It features a shielding of an aluminized fleece and a Cu spiral screen with 100 % coverage. Therefore it is very well protected against electrical interferences. This cable ensures an error-free data transfer even over distances of up to 1,000 meters (3,281 ft.) With the Binary 234 AES/EBU MKII you're on the safe side.Advantages:AES/EBU- and DMX-conformant, highly flexibleVery good shielding due to the use of a helical copper mesh screen plusan aluminium-vaporised fleeceExtremely rugged due to the special tough jacketOnly a little more expensive than a standard microphone cableApplication:Networking of scanners, lighting systems, digital mixing consoles etc.For indoor and outdoor installationConnection of digital audio amplifiers, DAT recorders etc.

When a pin drops...and if we can appreciate their sound, we have not only an excellent hearing, but certainly excellent hi-fi components in the phono rack as well. For highest demands and listening enjoyment we have designed the SC-ALBEDO MKII reference cable. The SC-ALBEDO MKII excels in particular by a newly developed conductor smoothing of the copper surface, a 100 % tight multiple shielding and a vivid, detailed reproduction. Its insulation consists of a polypropylene compound. The tightly stranded, tin-plated outer spiral screen and the coated aluminum foil ensure a very good shielding against HF and AF interfering signals. Due to its tight stranding and the use of ultra fine single wires (0.05 mm / 0.002 in.), the SC-ALBEDO MKII has very good capacitive and low conductor resistance values – just as we ourselves expect it from a reference cable. Nonetheless – and this will delight you – the SC-ALBEDO MKII is still affordable. Both wires soldered together to the plus pole / pin 1: ideal for connecting a CD player / tuner / tape or video recorder to the amplifier. Ground to pin 1, RED to pin 2, WHITE to pin 3: perfect for the connection between pre and power amp.Advantages:Extremely clear reproduction of high frequenciesSmall in diametervery inexpensiveBalanced connection possibleApplication:Phono cable for high demands

The shrinking violet…among the microphone cables is the new AES/EBU-capable SC-MICRO-STAGE.Though it may look somewhat inconspicuous at first sight, it splendidly meets the most essential requirements of contemporary live and studio technology.It has a cold-flexible, soft PVC jacket, a low capacitance and is very easy to handle.The compact cable diameter of 5,80 mm is ideal for using stereo jack connectors and XLR connectors with a small cable passage like they are still very popular e.g. overseas or on the US market.When used as a patch or MIDI cable, it will occupy only very little space in your patchbay or in the home studio.Due to its tight, concentric litz stranding and the foamed Skin PE wire insulation, the SC-MICRO-STAGE can easily transmit analogue and digital signals 110 Ω over distances greater than 100 metres.Advantages:High transmission quality due to the usw of fine strandingVery rugged owing to the thick, soft PVC jacketGood shielding due to dence helical copper mesh screenHigh flexibility makes it easy to reelApplication:Stage application – Studio

One thick coat...Protects the inner structure against mechanical strain such as pulling, tearing and knotting. This is why we gave STAGE 22 a thick outer jacket of 6,40 mm. But also the electrical values and the technical construction are very presentable: the STAGE 22 has a low capacitance and high bending cycles, provided by the super thin, tightly stranded single wires. The shielding of bare Cu wires has an optical coverage of 99 % (instead of the otherwiseusual 85 %). The STAGE 22 is therefore the ideal cable for stage, homerecordists, renters and ELA technicians. The STAGE 22 is a very inexpensive cable, but you won't have to accept any trade-offs.Advantages:High transmission quality due to the usw of fine strandingVery rugged owing to the thick, soft PVC jacketGood shielding due to dence helical copper mesh screenHigh flexibility makes it easy to reelAffordable priceApplication:Stage applicationHome recording