Filter
Wall connection field 2 HE, 6 BE, 80 mm deep, anthracite

SYSBOARD06W

Miscellaneous:Note: Please remove adhesive tape over screw holesMatching screws for front panels (please order also): S-G2508When using low-voltage components, also order our grounding set SY-PE-SET. (see accessories)
€115.00*
Wall connection field 2 HE, 3 BE, 80 mm deep, anthracite

SYSBOARD03W

Miscellaneous:Note: Please remove adhesive tape over screw holesMatching screws for front panels (please order also): S-G2508When using low-voltage components, also order our grounding set SY-PE-SET. (see accessories)
€103.90*
Wall connection field 2 HE, 2 BE, 80 mm deep, anthracite

SYSBOARD02W

Miscellaneous:Note: Please remove adhesive tape over screw holesMatching screws for front panels (please order also): S-G2508When using low-voltage components, also order our grounding set SY-PE-SET. (see accessories)
€90.00*
Wall offset box for 12 modules, 4U, a maximum of 2 x 6 BE

SYSBOARD12W

Wall offset box for 12 modules, 4U, maxi 2 x 6 BE, powder coated RAL 7016 fine structure; including SYPV-06 + 2 x 06-SYGSSuitable screws for front plate: S-G2508Miscellaneous:Note: Please remove adhesive tape over screw holesMatching screws for front panels (please order also): S-G2508When using low-voltage components, also order our grounding set SY-PE-SET. (see accessories)
€157.00*
Modular Wall Housing for SYSBOXX-Module, width: 237 mm, height: 298 mm, grey

SYSBOARD18-A

SYSBOARD Modular Wall Unitif you have the SYSBOARD installation housing for wall mount. This enables the installation of classic offsets with SYSBOXX components. Owing to the 100 mm offset mounting position even a multipin connector may remain plugged in despite the door being closed.The bottom of the housing also has a 154 x 30 mm opening for the supplied cable brush bushing to lead out cables also with the box closed. The door has a convertible stop variable closing position and can be locked with a square-section key (also available with a lamella locking cylinder plate barrel with up to 200 different closures positions). The housing sits either “on-wall” or can also be recessed in 2 positions into the wall using the supplied mounting brackets.Inside the SYSBOARD a large number of SYSBOXX front panels with up to 48 XLR-type-D can be fitted on a width of 9.5“ (6 WU) and 3 x 2 HU. Openings for the cable insertion are located on the back as well as on the rear bottom and can also be fitted with SYSBOXX front panels on a width of 6 WU (9.5“) each. The front panels are secured by M2.5 self-tapping countersunk screws. Please order separately. IP44 protection class is achieved when closed.Supplied accessories:SYSBOARD18 housingCable brush bushingCover panel (if no brush is required),2x fixing brackets8 x S-G4,0X10C-TS Screw for fixing brackets3 x S-M3,0X10C-TS Screw for brush/cover panel incl. S-T3,0X00I-AB Screw nut1x SYSBOXX grounding set1x square socket key
€495.00*
SYSBOARD Modular Wall Housing for SYSBOXX-Module, width: 237 mm, height: 298 mm, grey

SYSBOARD18

SYSBOARD Modular Wall Unitif you have the SYSBOARD installation housing for wall mount. This enables the installation of classic offsets with SYSBOXX components. Owing to the 100 mm offset mounting position even a multipin connector may remain plugged in despite the door being closed.The bottom of the housing also has a 154 x 30 mm opening for the supplied cable brush bushing to lead out cables also with the box closed. The door has a convertible stop variable closing position and can be locked with a square-section key (also available with a lamella locking cylinder plate barrel with up to 200 different closures positions). The housing sits either “on-wall” or can also be recessed in 2 positions into the wall using the supplied mounting brackets.Inside the SYSBOARD a large number of SYSBOXX front panels with up to 48 XLR-type-D can be fitted on a width of 9.5“ (6 WU) and 3 x 2 HU. Openings for the cable insertion are located on the back as well as on the rear bottom and can also be fitted with SYSBOXX front panels on a width of 6 WU (9.5“) each. The front panels are secured by M2.5 self-tapping countersunk screws. Please order separately. IP44 protection class is achieved when closed.Supplied accessories:SYSBOARD18 housingCable brush bushingCover panel (if no brush is required),2x fixing brackets8 x S-G4,0X10C-TS Screw for fixing brackets3 x S-M3,0X10C-TS Screw for brush/cover panel incl. S-T3,0X00I-AB Screw nut1x SYSBOXX grounding set1x square socket key
€495.00*
SYSBOXX Barrel lock

SYSBOARD-ZYL

SYSBOARD-ZYLBarrel lock for subsequent self-assemblyMiscellaneous:Delivery incl. 1 keydifferent locking systemBarrel frontal numbered
€48.00*
SYSBOARD Modular Wall Housing for SYSBOXX-Module, width: 237 mm, height: 298 mm, white

SYSBOARD18-R

SYSBOARD Modular Wall Unitif you have the SYSBOARD installation housing for wall mount. This enables the installation of classic offsets with SYSBOXX components. Owing to the 100 mm offset mounting position even a multipin connector may remain plugged in despite the door being closed.The bottom of the housing also has a 154 x 30 mm opening for the supplied cable brush bushing to lead out cables also with the box closed. The door has a convertible stop variable closing position and can be locked with a square-section key (also available with a lamella locking cylinder plate barrel with up to 200 different closures positions). The housing sits either “on-wall” or can also be recessed in 2 positions into the wall using the supplied mounting brackets.Inside the SYSBOARD a large number of SYSBOXX front panels with up to 48 XLR-type-D can be fitted on a width of 9.5“ (6 WU) and 3 x 2 HU. Openings for the cable insertion are located on the back as well as on the rear bottom and can also be fitted with SYSBOXX front panels on a width of 6 WU (9.5“) each. The front panels are secured by M2.5 self-tapping countersunk screws. Please order separately. IP44 protection class is achieved when closed.Supplied accessories:SYSBOARD18 housingCable brush bushingCover panel (if no brush is required),2x fixing brackets8 x S-G4,0X10C-TS Screw for fixing brackets3 x S-M3,0X10C-TS Screw for brush/cover panel incl. S-T3,0X00I-AB Screw nut1x SYSBOXX grounding set1x square socket key
€495.00*
SYSBOARD Modular Wall Housing for SYSBOXX-Module, width: 237 mm, height: 298 mm, grey

997-R-SYSBOARD18

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.SYSBOARD Modular Wall Unitif you have the SYSBOARD installation housing for wall mount. This enables the installation of classic offsets with SYSBOXX components. Owing to the 100 mm offset mounting position even a multipin connector may remain plugged in despite the door being closed.The bottom of the housing also has a 154 x 30 mm opening for the supplied cable brush bushing to lead out cables also with the box closed. The door has a convertible stop variable closing position and can be locked with a square-section key (also available with a lamella locking cylinder plate barrel with up to 200 different closures positions). The housing sits either “on-wall” or can also be recessed in 2 positions into the wall using the supplied mounting brackets.Inside the SYSBOARD a large number of SYSBOXX front panels with up to 48 XLR-type-D can be fitted on a width of 9.5“ (6 WU) and 3 x 2 HU. Openings for the cable insertion are located on the back as well as on the rear bottom and can also be fitted with SYSBOXX front panels on a width of 6 WU (9.5“) each. The front panels are secured by M2.5 self-tapping countersunk screws. Please order separately. IP44 protection class is achieved when closed.Supplied accessories:SYSBOARD18 housingCable brush bushingCover panel (if no brush is required),2x fixing brackets8 x S-G4,0X10C-TS Screw for fixing brackets3 x S-M3,0X10C-TS Screw for brush/cover panel incl. S-T3,0X00I-AB Screw nut1x SYSBOXX grounding set1x square socket key
€297.00*
SYSBOXX Barrel lock

+SYSDESK-ZYL

SYSBOARD-ZYLBarrel lock for subsequent self-assemblyMiscellaneous:shipmnt incl. 2 keysdifferent locking systemBarrel frontal numbered
€164.01*
CARDINAL DVM Front panel Front panel, white aluminum RAL9006, HDMI, VGA mini jack HDBaseT, colour: white

DVM-194-HDBT-T-S

For the installation in desk, wall and floor systems the compact DVM-194-HDBT-T front panel solution comprises the following requirements in a single junction box of only three width units: HDMI®, VGA and mini jack inputs, automatic or manual source switching, HDBaseT output, power supply via PoH (Power over HDBaseT), built-in IR receiver, rear RS232 connection plus ample signal indicators.Advantages:Compatible with SYSBOXX / SYSDESK / SYSBOARD / SYSFLOOR / SYSTRUNKintegrated scaler for VGAApplication:transmits FullHD signals up to 70mtransmits 4K / UHD signals up to 40mtransmits RS232 & IR bidirectionallysupports HDCP up to V1.4
€694.00*
CARDINAL DVM Front panel Front panel, pure white RAL9010, HDMI, VGA mini jack HDBaseT, colour: white

DVM-194-HDBT-T-W

For the installation in desk, wall and floor systems the compact DVM-194-HDBT-T front panel solution comprises the following requirements in a single junction box of only three width units: HDMI®, VGA and mini jack inputs, automatic or manual source switching, HDBaseT output, power supply via PoH (Power over HDBaseT), built-in IR receiver, rear RS232 connection plus ample signal indicators.Advantages:Compatible with SYSBOXX / SYSDESK / SYSBOARD / SYSFLOOR / SYSTRUNKintegrated scaler for VGAApplication:transmits FullHD signals up to 70mtransmits 4K / UHD signals up to 40mtransmits RS232 & IR bidirectionallysupports HDCP up to V1.4
€694.00*
CARDINAL DVM Front panel Front panel, gray RAL7016, HDMI, VGA mini jack HDBaseT, colour: grey

DVM-194-HDBT-T

For the installation in desk, wall and floor systems the compact DVM-194-HDBT-T front panel solution comprises the following requirements in a single junction box of only three width units: HDMI®, VGA and mini jack inputs, automatic or manual source switching, HDBaseT output, power supply via PoH (Power over HDBaseT), built-in IR receiver, rear RS232 connection plus ample signal indicators.Advantages:Compatible with SYSBOXX / SYSDESK / SYSBOARD / SYSFLOOR / SYSTRUNKintegrated scaler for VGAApplication:transmits FullHD signals up to 70mtransmits 4K / UHD signals up to 40mtransmits RS232 & IR bidirectionallysupports HDCP up to V1.4
€694.00*
Loading...
Upload in progress, please be patient ...