front panel 2 x D-Series cutout, 90° angled, 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey
€17.50*
SYFB21-2D
Please order screws separately
Wall connection field 2 HE, 6 BE, 80 mm deep, anthracite
€115.00*
SYSBOARD06W
Miscellaneous:Note: Please remove adhesive tape over screw holesMatching screws for front panels (please order also): S-G2508When using low-voltage components, also order our grounding set SY-PE-SET. (see accessories)
Mounting frame for floor tank , 2 HE, 6 BE for SYSBOXX-Module; With 50 front panel screws, colour: grey
€203.00*
SYSFLOOR-06
FLOOR TANK INSERT WITH SYSTEM (modular equipping)The ideal, extremely stable mounting frame for integrating audio/video/media and domestic installation connections in floor tank connection units. SYSFLOOR is available in three different versions:1. The SYSFLOOR-06 can be fitted on 9.5”, 6+2+2 WU with up to 16 x D-flange plus, for example, 2 additional Schuko positions as required and provides optimum installation options due to the stable strain relief ring with 19 cable fixing positions.2. The SYSFLOOR-04 can accommodate up to 10 x D-flange or appropriate media interfaces on 4 WU.3. The SYSFLOOR-03 can accommodate up to 8 x D-flange or appropriate media interfaces on 3 WU.The insert size of the SYSFLOOR-03 is equal to a GB2 mounting box (or a GB3 mounting box with the SYSFLOOR-04 resp.). This makes it possible to install SYSBOXX together with domestic installation components in one box. The insert size of the SYSFLOOR-06 is equal to 3 GB3 mounting boxes. Due to the slanted connection plane the cover of the floor tank can be closed even with plugged-in multipin connectors*. Owing to the generous space conditions power supplies and active converters (or the like) can be neatly tucked away in the floor box.The mounting frames are compatible with round and square OBO BETTERMANN/ACKERMANN equipment inserts (e.g. GESR9) and fitted with fixing holes in the 5.08 mm / 0.2" spacing (for self-tapping M2.5 screws) and installation accessories. The PE connection requires an earth bolt and naked, conductive locating surfaces for the front panels. SYSFLOOR-03/-04 are supplied with 25 front panel screws, the SYSFLOOR-06 comes with 50 front panel screws. The matching front panels for individual loading are shown on the following pages.Supplied accessories: SYSFLOOR-06 Frame4x SYSFLOOR-MB mounting panel for OBO-BETTERMANN floortanksystems50x S-G2,5x08S-TS countersunk screw Torx 8 for front panels & installation parts
Wall connection field 2 HE, 3 BE, 80 mm deep, anthracite
€103.90*
SYSBOARD03W
Miscellaneous:Note: Please remove adhesive tape over screw holesMatching screws for front panels (please order also): S-G2508When using low-voltage components, also order our grounding set SY-PE-SET. (see accessories)
Wall connection field 2 HE, 2 BE, 80 mm deep, anthracite
€90.00*
SYSBOARD02W
Miscellaneous:Note: Please remove adhesive tape over screw holesMatching screws for front panels (please order also): S-G2508When using low-voltage components, also order our grounding set SY-PE-SET. (see accessories)
Wall offset box for 12 modules, 4U, a maximum of 2 x 6 BE
€157.00*
SYSBOARD12W
Wall offset box for 12 modules, 4U, maxi 2 x 6 BE, powder coated RAL 7016 fine structure; including SYPV-06 + 2 x 06-SYGSSuitable screws for front plate: S-G2508Miscellaneous:Note: Please remove adhesive tape over screw holesMatching screws for front panels (please order also): S-G2508When using low-voltage components, also order our grounding set SY-PE-SET. (see accessories)
Modular Wall Housing for SYSBOXX-Module, width: 237 mm, height: 298 mm, grey
€495.00*
SYSBOARD18-A
SYSBOARD Modular Wall Unitif you have the SYSBOARD installation housing for wall mount. This enables the installation of classic offsets with SYSBOXX components. Owing to the 100 mm offset mounting position even a multipin connector may remain plugged in despite the door being closed.The bottom of the housing also has a 154 x 30 mm opening for the supplied cable brush bushing to lead out cables also with the box closed. The door has a convertible stop variable closing position and can be locked with a square-section key (also available with a lamella locking cylinder plate barrel with up to 200 different closures positions). The housing sits either “on-wall” or can also be recessed in 2 positions into the wall using the supplied mounting brackets.Inside the SYSBOARD a large number of SYSBOXX front panels with up to 48 XLR-type-D can be fitted on a width of 9.5“ (6 WU) and 3 x 2 HU. Openings for the cable insertion are located on the back as well as on the rear bottom and can also be fitted with SYSBOXX front panels on a width of 6 WU (9.5“) each. The front panels are secured by M2.5 self-tapping countersunk screws. Please order separately. IP44 protection class is achieved when closed.Supplied accessories:SYSBOARD18 housingCable brush bushingCover panel (if no brush is required),2x fixing brackets8 x S-G4,0X10C-TS Screw for fixing brackets3 x S-M3,0X10C-TS Screw for brush/cover panel incl. S-T3,0X00I-AB Screw nut1x SYSBOXX grounding set1x square socket key
19" panel 1 HE for 16 x D-type connectors
€212.00*
SYSPAN-D
Advantages:High packing density on 1 RUFlexible, fast equippingSubsequently alterable and thus future-proof
Mounting frame for floor tank , 2 HE, 4 BE for SYSBOXX-Module; with 25 front panel screws, colour: grey
€109.00*
SYSFLOOR-04
FLOOR TANK INSERT WITH SYSTEM (modular equipping)The ideal, extremely stable mounting frame for integrating audio/video/media and domestic installation connections in floor tank connection units. SYSFLOOR is available in three different versions:1. The SYSFLOOR-06 can be fitted on 9.5”, 6+2+2 WU with up to 16 x D-flange plus, for example, 2 additional Schuko positions as required and provides optimum installation options due to the stable strain relief ring with 19 cable fixing positions.2. The SYSFLOOR-04 can accommodate up to 10 x D-flange or appropriate media interfaces on 4 WU.3. The SYSFLOOR-03 can accommodate up to 8 x D-flange or appropriate media interfaces on 3 WU.The insert size of the SYSFLOOR-03 is equal to a GB2 mounting box (or a GB3 mounting box with the SYSFLOOR-04 resp.). This makes it possible to install SYSBOXX together with domestic installation components in one box. The insert size of the SYSFLOOR-06 is equal to 3 GB3 mounting boxes. Due to the slanted connection plane the cover of the floor tank can be closed even with plugged-in multipin connectors*. Owing to the generous space conditions power supplies and active converters (or the like) can be neatly tucked away in the floor box.The mounting frames are compatible with round and square OBO BETTERMANN/ACKERMANN equipment inserts (e.g. GESR9) and fitted with fixing holes in the 5.08 mm / 0.2" spacing (for self-tapping M2.5 screws) and installation accessories. The PE connection requires an earth bolt and naked, conductive locating surfaces for the front panels. SYSFLOOR-03/-04 are supplied with 25 front panel screws, the SYSFLOOR-06 comes with 50 front panel screws. The matching front panels for individual loading are shown on the following pages.Supplied accessories:SYSFLOOR-04 Frame SYSFLOOR-04 Grip guard plate2 x SYSFLOOR-MB Mounting clip für OBO-BETTERMANN Floortanksystems15 x S-G2,5x08S-TS thread grooving screw for Frontplate & mounting parts
Cover for SYSPANEL ; depth: 105 mm
€54.00*
SYSPAN-C
Miscellaneous:Matching screw: S-G2508 - please order separately (4 pieces are needed per cover)
Mounting frame for floor tank , 2 HE, 3 BE for SYSBOXX-Module; with 25 front panel screws, colour: grey
€116.00*
SYSFLOOR-03
FLOOR TANK INSERT WITH SYSTEM (modular equipping)The ideal, extremely stable mounting frame for integrating audio/video/media and domestic installation connections in floor tank connection units. SYSFLOOR is available in three different versions:1. The SYSFLOOR-06 can be fitted on 9.5”, 6+2+2 WU with up to 16 x D-flange plus, for example, 2 additional Schuko positions as required and provides optimum installation options due to the stable strain relief ring with 19 cable fixing positions.2. The SYSFLOOR-04 can accommodate up to 10 x D-flange or appropriate media interfaces on 4 WU.3. The SYSFLOOR-03 can accommodate up to 8 x D-flange or appropriate media interfaces on 3 WU.The insert size of the SYSFLOOR-03 is equal to a GB2 mounting box (or a GB3 mounting box with the SYSFLOOR-04 resp.). This makes it possible to install SYSBOXX together with domestic installation components in one box. The insert size of the SYSFLOOR-06 is equal to 3 GB3 mounting boxes. Due to the slanted connection plane the cover of the floor tank can be closed even with plugged-in multipin connectors*. Owing to the generous space conditions power supplies and active converters (or the like) can be neatly tucked away in the floor box.The mounting frames are compatible with round and square OBO BETTERMANN/ACKERMANN equipment inserts (e.g. GESR9) and fitted with fixing holes in the 5.08 mm / 0.2" spacing (for self-tapping M2.5 screws) and installation accessories. The PE connection requires an earth bolt and naked, conductive locating surfaces for the front panels. SYSFLOOR-03/-04 are supplied with 25 front panel screws, the SYSFLOOR-06 comes with 50 front panel screws. The matching front panels for individual loading are shown on the following pages.Supplied accessories:SYSFLOOR-03 Frame SYSFLOOR-03 Grip guard plate2 x SYSFLOOR-MB Mounting clip für OBO-BETTERMANN Floortanksystems15 x S-G2,5x08S-TS thread grooving screw for Frontplate & mounting parts
SYSWALL XLR
€40.00*
W45S-1065
Colour:
painted silver
|
Module size:
45 x 45 mm
|
Type:
XLR 3pin fem -> pc board with screw connection 3p
Variants from €37.00*
SYSWALL Empty modules
€15.10*
W45N-3314
Colour:
black mat
|
Module size:
45 x 45 mm
|
Type:
2 x Keystone breakout
Variants from €4.25*
SYSWALL Schuko socket outlet
€28.50*
W45N-3336
Colour:
black mat
|
Module size:
45 x 45 mm
|
Type:
SCHUKO socket outlet, 1-gang
Variants from €11.40*
SYSPANEL housing 19” with 16 x A / B press cut for 4 x SBC13-modules , 1 HE; depth: 140 mm
€212.00*
SYSPAN
Advantages:High packing density on 1 RUFlexible, fast equippingSubsequently alterable and thus future-proof
19" panel for 5 x SYFB 21 / SYCFB 21-panels, 1HU, depth 140 mm
€215.00*
SYSPAN5
The SYSPANEL5 allows the fast and easy construction of patch panels, device connection panels, connection distributors or transfer points, e.g. in control or equipment rooms.The SYSPANEL5 can be fitted with up to 5 SYSBOXX front panels (1 width unit / WU), SYFB21-…) or 5 SYSBOXX docking modules (1 width unit / WU), SYC1-…), thus enabling the realization of modular 1 RU connection panels with a flush-mount module integration into the housing front.As a strain relief for the feed lines, the case holds 28 metal tongues for attaching cable ties. The case earthing is provided by an M4 ground screw (PE).The individual lettering can be done using our SYSBOXX labeling profile. Optionally the SYSPANEL can be closed from above with the cover (SYSPAN-C).The labeling profile as well as the frontpanels/docking modules are fastened in a time-saving manner with self-tapping M2.5 Torx screws.Advantages:High packing density on 1 RUGreat variability due to a wide selection of front panels (e.g. for building a connection panel for media servers)Flexible, fast equippingSubsequently alterable and thus future-proof
Side panel blank panel, 2 HE; depth: 80 mm for SYSBOXX, colour: silver
€18.80*
SYST21-L-9006
SYSBOXX side panel 2U 1TE silverBlank panel, sheet steel 2 mm (0.08 in.), RAL 9010fs- 4 x countersink for M4 screw- no ground terminal (must be done yourself, if needed)
SYSBOARD Modular Wall Housing for SYSBOXX-Module, width: 237 mm, height: 298 mm, grey
€495.00*
SYSBOARD18
SYSBOARD Modular Wall Unitif you have the SYSBOARD installation housing for wall mount. This enables the installation of classic offsets with SYSBOXX components. Owing to the 100 mm offset mounting position even a multipin connector may remain plugged in despite the door being closed.The bottom of the housing also has a 154 x 30 mm opening for the supplied cable brush bushing to lead out cables also with the box closed. The door has a convertible stop variable closing position and can be locked with a square-section key (also available with a lamella locking cylinder plate barrel with up to 200 different closures positions). The housing sits either “on-wall” or can also be recessed in 2 positions into the wall using the supplied mounting brackets.Inside the SYSBOARD a large number of SYSBOXX front panels with up to 48 XLR-type-D can be fitted on a width of 9.5“ (6 WU) and 3 x 2 HU. Openings for the cable insertion are located on the back as well as on the rear bottom and can also be fitted with SYSBOXX front panels on a width of 6 WU (9.5“) each. The front panels are secured by M2.5 self-tapping countersunk screws. Please order separately. IP44 protection class is achieved when closed.Supplied accessories:SYSBOARD18 housingCable brush bushingCover panel (if no brush is required),2x fixing brackets8 x S-G4,0X10C-TS Screw for fixing brackets3 x S-M3,0X10C-TS Screw for brush/cover panel incl. S-T3,0X00I-AB Screw nut1x SYSBOXX grounding set1x square socket key
SYSBOXX Barrel lock
€48.00*
SYSBOARD-ZYL
SYSBOARD-ZYLBarrel lock for subsequent self-assemblyMiscellaneous:Delivery incl. 1 keydifferent locking systemBarrel frontal numbered
front panel blank panel, 2 HE, 1 BE for SYS-series, colour: RAL 9010 pure white
€15.45*
SYFR21-L
SYSBOXX front panel 2HE 1BE empty sheetfor SYSBOXX MKIIRAL9010
front panel 1 x SCHUKO, 2 HE, 2 BE for SYS-series
€18.00*
SYFS22-SCHUKO
SYSBOXX front panel 2HE 2BE 1x SCHUKOfor SYSBOXX MKIIRAL9006
