Pre-assembled cables for studio applications
Studio technology places different demands on cables than stage or live applications. In a studio cable, great importance is attached to good shielding and perfect audio transmission. This is extremely important in studio use, as the complex peripherals (computer, mixer, etc.) mean that strong interference is almost always to be expected.
Studio operators do not need cables that “sound”, but rather cables that match or are even superior to the quality of the studio technology used. It is a priority that the audio signal is reproduced faithfully. This is what our following cables are designed for.
Discover matching products in various lengths and colors here:
Microphone Cable Club Series MKII, 2 x 0,34 mm² | XLR / XLR, HICON
€32.50*
CSCF-0050-SW
Colour:
black
|
Length:
0,50m
The Club Series MKII has become a very popular microphone cable in the studio domain. It is attractively priced, yet offers outstanding electrical and technical specifications. Due to its high-quality insulation, the low capacitive value (58 pF wire/wire) and the relatively large wire cross-section of 2 x 0,34 mm² a safe and neutral transmission is guaranteed even over long distances. If no colour is specified, we deliver the cable in black.Application:With transparent code ring for your personal labels!Configuration: 0,50 m Microphone Cable Club Series MKII; 2 x 0,34 mm²; PVC Ø 6,50 mm; black (200-0051)1 x HI-X3CF-G-WOB1 x HI-XC-CAP-M1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x HI-X3CM-G-WOB1 x HI-XC-CAP-M1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x KARTONAGE-SCMINI
Microphone Cable Club Series MKII, 2 x 0,34 mm² | XLR / XLR, NEUTRIK®
€33.00*
CSMF-0050-SW
Colour:
black
|
Length:
0,50m
The Club Series MKII has become a very popular microphone cable in the studio domain. It is attractively priced, yet offers outstanding electrical and technical specifications. Due to its high-quality insulation, the low capacitive value (58 pF wire/wire) and the relatively large wire cross-section of 2 x 0,34 mm² a safe and neutral transmission is guaranteed even over long distances. If no colour is specified, we deliver the cable in black.Configuration: 0,50 m Microphone Cable Club Series MKII; 2 x 0,34 mm²; PVC Ø 6,50 mm; black (200-0051)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x KARTONAGE-SCMINI
Variants from €32.50*
Microphone Cable SC-Source MKII Highflex, 2 x 0,25 mm² | XLR / XLR, NEUTRIK®
€52.50*
SCN9-0500-SW
Colour:
black
|
Length:
5,00m
SC-Source MKII Highflex is the perfect cable for the demanding stage musician. A transparent ring is provided for personal labelling. The cable has a wire gauge of 2 x 0,25 mm² and superfine 0.05 mm OFC copper strands. Its very easy to reel and guarantees high bending cycles. The SC-SOURCEMKII HIGHFLEX has a dual shielding (aluminised fleece + braided Cu screen) with 100 % optical coverage and is totally free from crackling and other noises, even under difficult live conditions. We supply this cable with the gold-plated NC3MXX-B and NC3FXX-B connectors by NEUTRIK®.Configuration: 5,00 m Microphone Cable SC-Source MKII; 2 x 0,25 mm²; PVC Ø 6,50 mm; black (200-0101)1 x NC3FXX-B-WOB1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x NC3MXX-B-WOB1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)Sommer cable cable straps1 x Cardboard packaging for blister hooks, Design Sommer cable
Microphone reference cable EMC-QUAD, 4 x 0,14 mm² | XLR / XLR, NEUTRIK®
€135.90*
EGB1-0100-SW
Colour:
black
|
Length:
1,00m
The reference cable for High-End Studios and demanding Engineers, providing excellent sound precision, dynamic range, transient response time, spatial imaging, and shielding. With the design based on our star quad multicore we achieve a crossover capacitance of 36 pF. A 100% point-to-point protection against RF interferences is achieved by using a tight CU braiding with a semiconductoraluminum foil, combined with special 360° shielded NEUTRIK®-EMC XLRs which are custom-made for Sommer cable. For optimum conductivity, each of the 4 wires is treated with carbon conductor smoothing.Custom lengths and color ring versions on request.Special offer for the US: 30 day 100% money back guarantee.“The EMC-QUAD drove all of my other cables out of the water – it's so much better. The difference, both analog and digital, was amazing. The depth and imaging of the Sommer cable was outstanding. It sounded very musical. I was shocked when I heard the difference to those cables which I use every day and at how much better the Sonmer EMC-QUAD was. It was probably the best cable which I've ever heard, and I'm very happy to own it now.“ METAlliance engineers, Frank Filipetti, Chuck Ainlay, and Ed CherneyMETAlliance co-founder Frank Filipetti commented,“A lot of people say there’s no difference among cables, but this new Sommer cable just wipes everything else off the map.”METAlliance co-founder Chuck Ainlay remarked, “It’s such a quality cable just by the look and feel of it, and the XLR connectors are unbelievable. But listening is believing, right? I did a number of tests using different manufacturers cables and I just went straight from the converter to the speakers, nothing else in between.I was completely blown away that I would even hear a difference in the cables, and then I was shocked when I heard the difference between a cable I use every day and how much better Sommer sounded, far exceeding every other cable that I tried.”Advantages:Very neutral, spatial sound image without colourations for the perfect reproduction, especially of classical instrumentsAbsolute reference in many renowned recording and mastering studiosExtremely low capacitance of 35 pF wire/wire (crossover)Tested on almost all high-end systems from acknowledged brands (fine-tuned on the reference systems B&W Nautilus & Matrix Series as well as STAX Headphones JapanGold-plated HICON connectors with S-PTFE insulation or NEUTRIK® EMC Special XLR “SATIN“ with turned, gold-plated pins and 360° screen contactApplication:Connection for highest demands (pre/power amplifier, CD player, SACD, DVD-Audio, phono etc.)Phono cable for linear systems with particularly low colourationsBalanced high-end connection in reference studiosConfiguration: 1,00 m 800-02011 x NEUTRIK® XLR, 3-pole , Velvet Chrome housing-, Soldering-male connector, hard gold plated contact(s), straight, grey (NC3MXX-EMC-SOM)1 x NC3FXX-EMC-SOM-D1 x Cardboard packaging for blister hooks, Design Sommer cable
Connection with microphone headsets SC-Scuba 14 Highflex, 2 x 0,14 mm² | Mini-XLR / Mini-XLR, HICON
€36.00*
SUC1-0100-SW
Colour:
black
|
Length:
1,00m
Flexible premade patch cable for various applications, e.g. connecting microphone headsets. We use the 4 mm SC-Scuba 14 Highflex patch cable and finish it with solid HICON HI-MX3M and HI-MX3F mini XLR connectors.Configuration: 1,00 m Patch & Microphone Cable SC-Scuba 14; 2 x 0,14 mm²; PVC Ø 3,80 mm; black (200-0311)1 x HICON Mini-XLR, 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, nickel (HI-XMCM3)1 x HICON Mini-XLR, 3-pole , metal-, Soldering-female connector, gold plated contact(s), straight, nickel (HI-XMCF3)1 x Cardboard packaging for blister hooks, Design Groove+
Patch- / insertcable Stage 22 Highflex, 2 x 0,22 mm² | jack / jack, HICON
€25.00*
SG2S-0025-SW
Colour:
black
|
Length:
0,25m
Configuration: 0,25 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)1 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)1 x KARTONAGE-SCMINI
Patch- / insertcable Club Series MKII, 2 x 0,34 mm² | mini-jack / jack, HICON
€40.50*
CS63-0025-SW
Colour:
black
|
Length:
0,25m
Configuration: 0,25 m Microphone Cable Club Series MKII; 2 x 0,34 mm²; PVC Ø 6,50 mm; black (200-0051)1 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated pin, straight, black (HI-J63S03)1 x HICON jack (3,5mm), 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black (HI-J35S02)1 x KARTONAGE-SCMINI
Patch- / insertcable Club Series MKII, 2 x 0,34 mm² | XLR / mini-jack, HICON
€36.50*
CSDQ-0025-SW
Colour:
black
|
Length:
0,25m
Miscellaneous:Screen PIN 1, + = PIN 2, – = PIN 3Configuration: 0,25 m Microphone Cable Club Series MKII; 2 x 0,34 mm²; PVC Ø 6,50 mm; black (200-0051)1 x HICON jack (3,5mm), 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black (HI-J35S02)1 x HICON XLR PRO+, 3-pole male, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CM-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x KARTONAGE-SCMINI
Patch- / insertcable SC-Micro-Stage, 2 x 0,14 mm² | jack / jack, HICON
€24.50*
MR8E-0025-SW
Colour:
black
|
Length:
0,25m
Configuration: 0,25 m Microphone cable, DMX, AES/EBU, SC-MICRO-STAGE; 2 x 0,14 mm²; PVC Ø 5,80 mm; black (200-0371)1 x HI-J63SP-B-D1 x HI-J63SP-B-D1 x KARTONAGE-SCMINI
Patch cable, minijack SC-Goblin, 2 x 0,14 mm² | mini jack / mini jack, HICON
€37.00*
GOCU-0025-SW
Colour:
black
|
Length:
0,25m
The SC-Goblin patch cable is ideal for studio applications as it is reallyflexible and, due to its small dimensions, fits well into TT-Phone and mini jack connectors. We supply the SC-Goblin in combination with HICON mini jacks and also NEUTRIK® TT-Phone, XLR, jack and B-GAUGE connectors. As an economic alternative we offer you the Groove version with HICON TT-Phone connectors.Configuration: 0,25 m Patch & Microphone Cable SC-Goblin; 2 x 0,14 mm²; PVC Ø 4,60 mm; black (200-0351)1 x HICON jack (3,5mm), 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black (HI-J35S-SCREW-M)1 x HICON jack (3,5mm), 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black (HI-J35S-SCREW-M)1 x KARTONAGE-SCMINI
Patch cable, minijack SC-Goblin, 2 x 0,14 mm² | mini jack / mini jack, HICON
€41.50*
GOCW-0250-SW
Colour:
black
|
Length:
2,50m
The SC-Goblin patch cable is ideal for studio applications as it is reallyflexible and, due to its small dimensions, fits well into TT-Phone and mini jack connectors. We supply the SC-Goblin in combination with HICON mini jacks and also NEUTRIK® TT-Phone, XLR, jack and B-GAUGE connectors. As an economic alternative we offer you the Groove version with HICON TT-Phone connectors.Configuration: 2,50 m Patch & Microphone Cable SC-Goblin; 2 x 0,14 mm²; PVC Ø 4,60 mm; black (200-0351)1 x HICON jack (3,5mm), 3-pole , metal-, Soldering-female connector, gold plated contact(s), straight, black (HI-J35S-SCREW-F)1 x HICON jack (3,5mm), 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black (HI-J35S-SCREW-M)1 x Cardboard packaging for blister hooks, Design Groove+
Patch cable, tt-phone, 2 | TT-Phone / TT-Phone
€12.53*
BV-TTTT-0030-SW
Colour:
black
|
Length:
0,30m
Patch cable, TT-Phone SC-Goblin, 2 x 0,14 mm² | TT-Phone / TT-Phone, NEUTRIK®
€41.00*
GO41-0025-SW
Colour:
black
|
Length:
0,25m
The SC-Goblin patch cable is ideal for studio applications since it is very flexible and, owing to its small dimensions, fits well into TT Phone connectors and mini jack plugs. The diameter of the SC-Goblin fits perfectly onto the crimp connection of the NEUTRIK® TT Phone connector which makes a perfect screen connection and also a strong strain relief.Configuration: 0,25 m Patch & Microphone Cable SC-Goblin; 2 x 0,14 mm²; PVC Ø 4,60 mm; black (200-0351)1 x NEUTRIK® TT-Phone, 3 pole, solder contacts for T + R, HEX crimp cable clamp for shield connection and strain relief, nickel (r) Contact (s), straight, black (NP3TT-P-B)1 x NEUTRIK® TT-Phone, 3 pole, solder contacts for T + R, HEX crimp cable clamp for shield connection and strain relief, nickel (r) Contact (s), straight, black (NP3TT-P-B)1 x KARTONAGE-SCMINI
Patch cable, tt-phone SC-Goblin, 2 x 0,14 mm² | XLR / TT-Phone, NEUTRIK®
€36.50*
GO43-0050-SW
Colour:
black
|
Length:
0,50m
The SC-Goblin patch cable is ideal for studio applications since it is very flexible and, owing to its small dimensions, fits well into TT Phone connectors and mini jack plugs. We deliver the SC-Goblin in combination with HICON mini jacks as well as NEUTRIK® TT Phone, XLR, jack and B-GAUGE connectors.Configuration: 0,50 m Patch & Microphone Cable SC-Goblin; 2 x 0,14 mm²; PVC Ø 4,60 mm; black (200-0351)1 x NEUTRIK® TT-Phone, 3 pole, solder contacts for T + R, HEX crimp cable clamp for shield connection and strain relief, nickel (r) Contact (s), straight, black (NP3TT-P-B)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, black (NC3MX-BAG)1 x KARTONAGE-SCMINI
Patch cable, tt-phone SC-Goblin, 2 x 0,14 mm² | XLR / TT-Phone, NEUTRIK®
€37.00*
GO44-0025-SW
Colour:
black
|
Length:
0,25m
The SC-Goblin patch cable is ideal for studio applications since it is very flexible and, owing to its small dimensions, fits well into TT Phone connectors and mini jack plugs. We deliver the SC-Goblin in combination with HICON mini jacks as well as NEUTRIK® TT Phone, XLR, jack and B-GAUGE connectors.Configuration: 0,25 m Patch & Microphone Cable SC-Goblin; 2 x 0,14 mm²; PVC Ø 4,60 mm; black (200-0351)1 x NEUTRIK® TT-Phone, 3 pole, solder contacts for T + R, HEX crimp cable clamp for shield connection and strain relief, nickel (r) Contact (s), straight, black (NP3TT-P-B)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, black (NC3FX-BAG)1 x KARTONAGE-SCMINI
Patch cable, tt-phone SC-Goblin, 2 x 0,14 mm² | TT-Phone / Jack, NEUTRIK®
€40.50*
GO2H-0025-SW
Colour:
black
|
Length:
0,25m
The SC-Goblin patch cable is ideal for studio applications since it is very flexible and, owing to its small dimensions, fits well into TT Phone connectors and mini jack plugs. We deliver the SC-Goblin in combination with HICON mini jacks as well as NEUTRIK® TT Phone, XLR, jack and B-GAUGE connectors.Configuration: 0,25 m Patch & Microphone Cable SC-Goblin; 2 x 0,14 mm²; PVC Ø 4,60 mm; black (200-0351)1 x NEUTRIK® TT-Phone, 3 pole, solder contacts for T + R, HEX crimp cable clamp for shield connection and strain relief, nickel (r) Contact (s), straight, black (NP3TT-P-B)1 x NP3X-BAG-D1 x KARTONAGE-SCMINI
Patch cable Tricone® MKII, 1 x 0,22 mm² | XLR / RCA, HICON
€26.00*
TRH7-0025-SW
Colour:
black
|
Length:
0,25m
The Tricone® MKII patch cable is available in two different versions: first the XLR version with high-quality HICON connectors with gold contacts, and then its sibling with high-grade NEUTRIK® or HICON phono connectors. The HICON phono connectors are real gold-plated, have a decent strain relief and a solid, PTFE-insulated pin.Configuration: 0,25 m Instrument Cable Tricone® MKII; 1 x 0,22 mm²; PVC Ø 5,90 mm; black (300-0021)1 x HI-CM06-NTL-D1 x HICON XLR PRO+, 3-pole male, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CM-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x KARTONAGE-SCMINI
Patch cable Tricone® MKII, 1 x 0,22 mm² | XLR / RCA, HICON
€26.00*
TRH8-0025-SW
Colour:
black
|
Length:
0,25m
The Tricone® MKII patch cable is available in two different versions: first the XLR version with high-quality HICON connectors with gold contacts, and then its sibling with high-grade NEUTRIK® or HICON phono connectors. The HICON phono connectors are real gold-plated, have a decent strain relief and a solid, PTFE-insulated pin.Configuration: 0,25 m Instrument Cable Tricone® MKII; 1 x 0,22 mm²; PVC Ø 5,90 mm; black (300-0021)1 x HI-CM06-NTL-D1 x HICON XLR PRO+, 3-pole female, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CF-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x KARTONAGE-SCMINI
Instrument cable Tricone® MKII, 1 x 0,22 mm² | RCA / Jack, HICON
€25.50*
TR2V-0025-SW
Colour:
black
|
Length:
0,25m
The Tricone® MKII patch cable is available in two different versions: first the XLR version with high-quality HICON connectors with gold contacts, and then its sibling with high-grade NEUTRIK® or HICON phono connectors. The HICON phono connectors are real gold-plated, have a decent strain relief and a solid, PTFE-insulated pin.Configuration: 0,25 m Instrument Cable Tricone® MKII; 1 x 0,22 mm²; PVC Ø 5,90 mm; black (300-0021)1 x HI-J63M-D1 x HI-CM06-NTL-D1 x KARTONAGE-SCMINI
Patch cable Tricone® MKII, 1 x 0,22 mm² | jack / RCA, NEUTRIK®
€27.50*
TR2W-0030-SW
Colour:
black
|
Length:
0,30m
The Tricone® MKII patch cable is available in two different versions: first the XLR version with high-quality HICON connectors with gold contacts, and then its sibling with high-grade NEUTRIK® or HICON phono connectors. The HICON phono connectors are real gold-plated, have a decent strain relief and a solid, PTFE-insulated pin.Configuration: 0,30 m Instrument Cable Tricone® MKII; 1 x 0,22 mm²; PVC Ø 5,90 mm; black (300-0021)1 x NP2X-BAG-D1 x HI-CM06-NTL-D1 x KARTONAGE-SCMINI
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / jack, NEUTRIK®
€33.00*
SGN4-0050-SW
Colour:
black
|
Length:
0,50m
The Stage 22 Highflex is a high-quality, very reasonably priced cable with a wire gauge of 2 x 0,22 mm² (AWG 24) and a 6.4 mm thick supersoft PVC jacket. It is filled with PVC almost all the way to the core and allows for excellent reeling. We supply it with NEUTRIK® NP3X jack connector and NC3MXX XLR connectors.Configuration: 0,50 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x KARTONAGE-SCMINI
Microphone Cable Stage 22 Highflex, 2 x 0,22 mm² | XLR / jack, NEUTRIK®
€34.00*
SGN5-0050-SW
Colour:
black
|
Length:
0,50m
The Stage 22 Highflex is a high-quality, very reasonably priced cable with a wire gauge of 2 x 0,22 mm² (AWG 24) and a 6.4 mm thick supersoft PVC jacket. It is filled with PVC almost all the way to the core and allows for excellent reeling. We supply it with NEUTRIK® NP3X jack connector and NC3FXX XLR connectors.Configuration: 0,50 m Microphone Cable Stage 22 Highflex; 2 x 0,22 mm²; PVC Ø 6,40 mm; black (200-0001)1 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)1 x NEUTRIK® Cover cap for XLR MXX, XLR FXX black (BXX0)1 x KARTONAGE-SCMINI
Patch cable Club Series MKII, 2 x 0,34 mm² | jack / jack, NEUTRIK®
€59.00*
CSWU-0300-SW
Colour:
black
|
Length:
3,00m
Configuration: 3,00 m Microphone Cable Club Series MKII; 2 x 0,34 mm²; PVC Ø 6,50 mm; black (200-0051)1 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)1 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NJ3FC6)1 x Cardboard packaging for blister hooks, Design Sommer cable
Stereo split cable SC-Onyx, 1 x 0,25 mm² | jack / RCA, HICON
€55.50*
ONH0-0100-SW
Colour:
black
|
Length:
1,00m
Configuration: 1,00 m Patch & Instrument Cable SC-Onyx 2025 MKII; 2 x 1 x 0,25 mm²; PVC; 8.3 x 3.8 mm; black (320-0101)1 x HI-J63M03-D1 x HI-J63M03-D1 x HICON Code ring for HI-J63M/S /M03 / M03-G/S03, red (HI-JC-RT6)1 x HICON Code ring for HI-J63M/S /M03 / M03-G/S03, blue (HI-JC-BL6)1 x HI-CM06-BLU-D1 x HI-CM06-RED-D1 x Cardboard packaging for blister hooks, Design Groove+
Stereo split cable SC-Onyx, 1 x 0,25 mm² | XLR / mini-jack, HICON
€52.00*
ON9V-0025-SW
Colour:
black
|
Length:
0,25m
Miscellaneous:Allocation: Tip > XLR L, PIN 2, black / Ring > XLR R, PIN 2, red / shell > groundConfiguration: 0,25 m Patch & Instrument Cable SC-Onyx 2025 MKII; 2 x 1 x 0,25 mm²; PVC; 8.3 x 3.8 mm; black (320-0101)1 x HICON jack (3,5mm), 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black (HI-J35S02)2 x HI-X3CM-G-WOB
Stereo split cable SC-Onyx, 1 x 0,25 mm² | XLR / mini-jack, HICON
€49.50*
ON9U-0025-SW
Colour:
black
|
Length:
0,25m
Miscellaneous:Allocation: Tip > XLR L, PIN 2, black / Ring > XLR R, PIN 2, red / shell > groundConfiguration: 0,25 m Patch & Instrument Cable SC-Onyx 2025 MKII; 2 x 1 x 0,25 mm²; PVC; 8.3 x 3.8 mm; black (320-0101)1 x HICON jack (3,5mm), 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black (HI-J35S02)2 x HICON XLR PRO+, 3-pole female, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CF-M)1 x KARTONAGE-SCMINI
Stereo split cable SC-Onyx, 1 x 0,25 mm² | mini-jack / jack, HICON
€50.00*
ON1W-0025-SW
Colour:
black
|
Length:
0,25m
Miscellaneous:Allocation: Tip > jack L, black/ring > jack R, red/shell > groundConfiguration: 0,25 m Patch & Instrument Cable SC-Onyx 2025 MKII; 2 x 1 x 0,25 mm²; PVC; 8.3 x 3.8 mm; black (320-0101)1 x HICON jack (3,5mm), 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black (HI-J35S02)2 x HI-J63M03-D1 x KARTONAGE-SCMINI
Rca cable RCA / MiniJack, 2 | RCA phono, HICON / 3.5 mm stereo mini jack
€10.40*
BV-CIJ3-0075
Length:
0,75 m
Stereo split cable SC-Onyx, 1 x 0,25 mm² | mini-jack / RCA, HICON
€55.50*
ON2A-0025-SW
Colour:
black
|
Length:
0,25m
Miscellaneous:Allocation: Tip > RCA L, white / Ring > RCA R, red / shell > groundConfiguration: 0,25 m Patch & Instrument Cable SC-Onyx 2025 MKII; 2 x 1 x 0,25 mm²; PVC; 8.3 x 3.8 mm; black (320-0101)1 x HICON jack (3,5mm), 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black (HI-J35S02)1 x HI-CM06-NTL-D1 x HI-CM06-RED-D1 x KARTONAGE-SCMINI
Stereo split cable SC-Onyx, 1 x 0,25 mm² | mini-jack / RCA, HICON
€56.50*
ONHK-0025-SW
Colour:
black
|
Length:
0,25m
Miscellaneous:Allocation: Tip > RCA L, white / Ring > RCA R, red / shell > groundConfiguration: 0,25 m Patch & Instrument Cable SC-Onyx 2025 MKII; 2 x 1 x 0,25 mm²; PVC; 8.3 x 3.8 mm; black (320-0101)1 x HICON jack (3,5mm), 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black (HI-J35S02)1 x HICON RCA, 2-pole , metal-, Soldering-female connector, gold plated contact(s), straight, chrome coloured (HI-CF08-BLU)1 x HICON RCA, 2-pole , metal-, Soldering-female connector, gold plated contact(s), straight, chrome coloured (HI-CF08-RED)1 x KARTONAGE-SCMINI
Rca patch cable, unbalanced SC-Onyx, 1 x 0,25 mm² | RCA / RCA, HICON
€59.50*
ON81-0050-SW
Colour:
black
|
Length:
0,50m
We supply our highly flexible SC-ONYX twin cables and our SC-QUANTUM audio multicore hand-soldered with high-class PTFE-insulated, real gold-plated HICON all metal RCA connectors with massive pin.Configuration: 0,50 m Patch & Instrument Cable SC-Onyx 2025 MKII; 2 x 1 x 0,25 mm²; PVC; 8.3 x 3.8 mm; black (320-0101)1 x HI-CM06-NTL-D1 x HI-CM06-RED-D1 x HI-CM06-NTL-D1 x HI-CM06-RED-D1 x KARTONAGE-SCMINI
Midi cable SC-Goblin, 2 x 0,14 mm² | DIN5 / DIN5, REAN
€26.50*
GO50-0030-SW
Colour:
black
|
Length:
0,30m
We exclusively process our 100 % shielded SC-Goblin and SC-Semicolon cables and 5-pole connectors from REAN. We offer you different versions: a BASIC cable with molded connectors (3 pins connected) as the slightly cheaper variant, and a superior 100 % shielded cable with 5-pole connectors from REAN. These are our SC-Goblin with 3 pins connected and our SC-Semicolon with 5 pins connected. The latter version is often used on effects devices or remote keyboards which have a status feedback function. Of course, it can also serve as a transfer cable for tape recording.Configuration: 0,30 m Patch & Microphone Cable SC-Goblin; 2 x 0,14 mm²; PVC Ø 4,60 mm; black (200-0351)1 x REAN Midi, 5-pol , metal-, Soldering-male connector, silver plated contact(s), straight, grey (NYS322)1 x REAN Midi, 5-pol , metal-, Soldering-male connector, silver plated contact(s), straight, grey (NYS322)1 x KARTONAGE-SCMINI
Midi cable SC-Semicolon, 4 x 0,14 mm² | DIN5 / DIN5, REAN
€32.00*
MQ50-0090-SW
Colour:
black
|
Length:
0,90m
We exclusively process our 100 % shielded SC-Goblin and SC-Semicolon cables and 5-pole connectors from NEUTRIK®. We offer you different versions: a BASIC cable with molded connectors (3 pins connected) as the slightly cheaper variant, and a superior 100 % shielded cable with 5-pole connectors from NEUTRIK®. These are our SC-Goblin with 3 pins connected and our SC-Semicolon with 5 pins connected. The latter version is often used on effects devices or remote keyboards which have a status feedback function. Of course, it can also serve as a transfer cable for tape recording.Configuration: 0,90 m DMX SC-Semicolon 4 AES/EBU; 4 x 0.14 mm²; Soft-PUR-FRNC Ø 5,20 mm; black (521-0141)1 x REAN Midi, 5-pol , metal-, Soldering-male connector, silver plated contact(s), straight, grey (NYS322)1 x REAN Midi, 5-pol , metal-, Soldering-male connector, silver plated contact(s), straight, grey (NYS322)1 x Cardboard packaging for blister hooks, Design Sommer cable
Aes / ebu / dmx512 Binary 234 AES/EBU MKII, 2 x 0,34 mm² | XLR / XLR, HICON
€29.00*
B2CE-0100-SW
Colour:
black
|
Length:
1,00m
These premade cables are outstandingly suitable for transmitting the 110 Ω AES/ EBU 2 DMX-512 data format. Note: Due to loss of data and information (caused by reflections at the cable end which may be due to a faulty line balancing), the use of a standard microphone cable is not advisable. In the lighting sector a loss of data causes a total holdup of signal transmissions, e.g. in a moving lights control system. The very favorable price of this cable should make it easy to switch from a standard microphone cable to a decent AES/EBU cable.
Our AES/EBU cable BINARY 234 AES/EBU MKII with 100 % shielding made of CU spiral and aluminum-coated fleece and a capacitance of 63pF/m (core/core) guarantees error-free data transfer even over longer distances of up to 100 meters.
Here we use the AES/EBU cable with black HICON in a robust full metal design.Configuration: 1,00 m DMX Binary 234 AES/EBU MKII; 2 x 0.34 mm²; PVC Ø 6,20 mm; black (520-0051)1 x HICON XLR PRO+, 3-pole female, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CF-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x HICON XLR PRO+, 3-pole male, silver-plated contacts, black metal housing, black metal cap, 6-chuck collet strain relief (HI-X3CM-M)1 x HICON Metal cap, HICON-XLR metal cap, metal black (HI-XCAP0)1 x HICON Code ring for HICON XLR straight transparent (HI-XC-TR)1 x Cardboard packaging for blister hooks, Design Groove+
Aes / ebu Binary 234 AES/EBU MKII, 2 x 0,34 mm² | XLR / XLR, NEUTRIK®
€39.00*
B207-0250-SW
Colour:
black
|
Length:
2,50m
These premade cables are outstandingly suitable for transmitting the 110 Ω AES/ EBU data format. Note: Due to loss of data and information (caused by the “skin effect“), the use of a standard microphone cable is not recommended. In the lighting sector a loss of data causes a total holdup of signal transmissions, e.g. in a scanner control system. The very favorable price of this cable should make it easy to switch from a standard microphone cable to a decent AES/EBU cable. Our AES/EBU cable ensures an error-free data transfer even over longer distances of up to 100 m (328 ft.). We use the Binary 234 AES/EBU MKII AES/EBU cable with 100 % shielding and the HICON HI-X3CM-M and HI-X3CF-M ] XLR connectors or the NEUTRIK® NC3MX-BAG and NC3FX-BAG XLR connectors or the respective 5-pole versions with 3 poles connected.Configuration: 2,50 m DMX Binary 234 AES/EBU MKII; 2 x 0.34 mm²; PVC Ø 6,20 mm; black (520-0051)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, black (NC3FX-BAG)1 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, black (NC3MX-BAG)1 x Cardboard packaging for blister hooks, Design Sommer cable
Digital foc Polymer Optische Faser (POF), 1 | Toslink / Toslink, HICON
€25.00*
HI-TLTL-0075
Length:
0,75 m
Studio loom
€75.90*
QM7A-M02/00-0200
Cable:
QUANTUM
|
In/Out:
02/00
|
Length:
2,00m
|
Side 1:
HICON jack mono
|
Side 2:
HICON jack mono
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 02 (100-0451-02)2 x HICON jack (6,3mm) 2-pole metal-crimp-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63M01)0,05 x BPDWM-12/04-TR2 x HICON jack (6,3mm) 2-pole metal-crimp-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63M01)0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Groove+
Variants from €61.00*
Studio loom
€84.00*
QMN2-M02/00-0200
Cable:
QUANTUM
|
In/Out:
02/00
|
Length:
2,00m
|
Side 1:
NEUTRIK mono jack
|
Side 2:
NEUTRIK mono jack
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 02 (100-0451-02)2 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-12/04-TR2 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-12/04-TR
Variants from €61.00*
Studio loom
€160.00*
QMN2-M04/00-0200
Cable:
QUANTUM
|
In/Out:
04/00
|
Length:
2,00m
|
Side 1:
NEUTRIK mono jack
|
Side 2:
NEUTRIK mono jack
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 04 (100-0451-04)4 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-12/04-TR4 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-12/04-TR
Variants from €61.00*
Studio loom
€316.00*
QMN2-M08/00-0200
Cable:
QUANTUM
|
In/Out:
08/00
|
Length:
2,00m
|
Side 1:
NEUTRIK mono jack
|
Side 2:
NEUTRIK mono jack
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 08 (100-0451-08)8 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-18/06-TR8 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-18/06-TR
Variants from €61.00*
Studio loom
€469.00*
QMN2-M12/00-0200
Cable:
QUANTUM
|
In/Out:
12/00
|
Length:
2,00m
|
Side 1:
NEUTRIK mono jack
|
Side 2:
NEUTRIK mono jack
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 12 (100-0451-12)12 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-18/06-TR12 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-18/06-TR
Variants from €61.00*
Studio loom
€623.00*
QMN2-M16/00-0200
Cable:
QUANTUM
|
In/Out:
16/00
|
Length:
2,00m
|
Side 1:
NEUTRIK mono jack
|
Side 2:
NEUTRIK mono jack
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 16 (100-0451-16)16 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-24/08-TR16 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-24/08-TR
Variants from €61.00*
Studio loom
€79.00*
QM2S-M02/00-0200
Cable:
QUANTUM
|
In/Out:
02/00
|
Length:
2,00m
|
Side 1:
HICON jack stereo
|
Side 2:
HICON jack stereo
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 02 (100-0451-02)2 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-12/04-TR2 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Groove+
Variants from €61.00*
Studio loom
€276.00*
QM2S-M08/00-0100
Cable:
QUANTUM
|
In/Out:
08/00
|
Length:
1,00m
|
Side 1:
HICON jack stereo
|
Side 2:
HICON jack stereo
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 1,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 08 (100-0451-08)8 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-18/06-TR8 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-18/06-TR1 x Cardboard packaging for blister hooks, Design Groove+
Variants from €61.00*
Studio loom
€427.00*
QM2S-M12/00-0200
Cable:
QUANTUM
|
In/Out:
12/00
|
Length:
2,00m
|
Side 1:
HICON jack stereo
|
Side 2:
HICON jack stereo
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 12 (100-0451-12)12 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-18/06-TR12 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-18/06-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€566.00*
QM2S-M16/00-0200
Cable:
QUANTUM
|
In/Out:
16/00
|
Length:
2,00m
|
Side 1:
HICON jack stereo
|
Side 2:
HICON jack stereo
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 16 (100-0451-16)16 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-24/08-TR16 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-24/08-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€99.00*
QMN3-M02/00-0200
Cable:
QUANTUM
|
In/Out:
02/00
|
Length:
2,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK jack stereo
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 02 (100-0451-02)2 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-12/04-TR2 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€188.00*
QMN3-M04/00-0200
Cable:
QUANTUM
|
In/Out:
04/00
|
Length:
2,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK jack stereo
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 04 (100-0451-04)4 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-12/04-TR4 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€358.00*
QMN3-M08/00-0100
Cable:
QUANTUM
|
In/Out:
08/00
|
Length:
1,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK jack stereo
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 1,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 08 (100-0451-08)8 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-18/06-TR8 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-18/06-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€549.90*
QMN3-M12/00-0200
Cable:
QUANTUM
|
In/Out:
12/00
|
Length:
2,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK jack stereo
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 12 (100-0451-12)12 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-18/06-TR12 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-18/06-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€730.90*
QMN3-M16/00-0200
Cable:
QUANTUM
|
In/Out:
16/00
|
Length:
2,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK jack stereo
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 16 (100-0451-16)16 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-24/08-TR16 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-24/08-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€80.00*
QMHA-M02/00-0200
Cable:
QUANTUM
|
In/Out:
02/00
|
Length:
2,00m
|
Side 1:
HICON jack stereo
|
Side 2:
HICON XLR male
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 02 (100-0451-02)2 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-12/04-TR2 x HI-X3CM-BLK-D0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€145.00*
QMHA-M04/00-0200
Cable:
QUANTUM
|
In/Out:
04/00
|
Length:
2,00m
|
Side 1:
HICON jack stereo
|
Side 2:
HICON XLR male
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 04 (100-0451-04)4 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-12/04-TR4 x HI-X3CM-BLK-D0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€410.00*
QMHA-M12/00-0200
Cable:
QUANTUM
|
In/Out:
12/00
|
Length:
2,00m
|
Side 1:
HICON jack stereo
|
Side 2:
HICON XLR male
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 12 (100-0451-12)12 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-18/06-TR12 x HI-X3CM-BLK-D0,05 x BPDWM-18/06-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€543.00*
QMHA-M16/00-0200
Cable:
QUANTUM
|
In/Out:
16/00
|
Length:
2,00m
|
Side 1:
HICON jack stereo
|
Side 2:
HICON XLR male
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 16 (100-0451-16)16 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-24/08-TR16 x HI-X3CM-BLK-D0,05 x BPDWM-24/08-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€80.00*
QMHB-M02/00-0200
Cable:
QUANTUM
|
In/Out:
02/00
|
Length:
2,00m
|
Side 1:
HICON jack stereo
|
Side 2:
HICON XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 02 (100-0451-02)2 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-12/04-TR2 x HI-X3CF-B-D0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€144.00*
QMHB-M04/00-0200
Cable:
QUANTUM
|
In/Out:
04/00
|
Length:
2,00m
|
Side 1:
HICON jack stereo
|
Side 2:
HICON XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 04 (100-0451-04)4 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-12/04-TR4 x HI-X3CF-B-D0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€277.00*
QMHB-M08/00-0200
Cable:
QUANTUM
|
In/Out:
08/00
|
Length:
2,00m
|
Side 1:
HICON jack stereo
|
Side 2:
HICON XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 08 (100-0451-08)8 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-18/06-TR8 x HI-X3CF-B-D0,05 x BPDWM-18/06-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€407.00*
QMHB-M12/00-0200
Cable:
QUANTUM
|
In/Out:
12/00
|
Length:
2,00m
|
Side 1:
HICON jack stereo
|
Side 2:
HICON XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 12 (100-0451-12)12 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-18/06-TR12 x HI-X3CF-B-D0,05 x BPDWM-18/06-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€538.00*
QMHB-M16/00-0200
Cable:
QUANTUM
|
In/Out:
16/00
|
Length:
2,00m
|
Side 1:
HICON jack stereo
|
Side 2:
HICON XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 16 (100-0451-16)16 x HICON jack (6,3mm) 3-pole metal-Soldering-male connector, nickel plated with Goldtip pin, straight, chrome coloured (HI-J63S01)0,05 x BPDWM-24/08-TR16 x HI-X3CF-B-D0,05 x BPDWM-24/08-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€95.00*
QMN4-M02/00-0200
Cable:
QUANTUM
|
In/Out:
02/00
|
Length:
2,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK XLR male
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 02 (100-0451-02)2 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-12/04-TR2 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€174.00*
QMN4-M04/00-0200
Cable:
QUANTUM
|
In/Out:
04/00
|
Length:
2,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK XLR male
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 04 (100-0451-04)4 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-12/04-TR4 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€337.00*
QMN4-M08/00-0200
Cable:
QUANTUM
|
In/Out:
08/00
|
Length:
2,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK XLR male
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 08 (100-0451-08)8 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-18/06-TR8 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)0,05 x BPDWM-18/06-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€497.00*
QMN4-M12/00-0200
Cable:
QUANTUM
|
In/Out:
12/00
|
Length:
2,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK XLR male
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 12 (100-0451-12)12 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-18/06-TR12 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)0,05 x BPDWM-18/06-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€658.00*
QMN4-M16/00-0200
Cable:
QUANTUM
|
In/Out:
16/00
|
Length:
2,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK XLR male
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 16 (100-0451-16)16 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-24/08-TR16 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)0,05 x BPDWM-24/08-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€97.00*
QMN5-M02/00-0200
Cable:
QUANTUM
|
In/Out:
02/00
|
Length:
2,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 02 (100-0451-02)2 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-12/04-TR2 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€178.00*
QMN5-M04/00-0200
Cable:
QUANTUM
|
In/Out:
04/00
|
Length:
2,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 04 (100-0451-04)4 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-12/04-TR4 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€346.00*
QMN5-M08/00-0200
Cable:
QUANTUM
|
In/Out:
08/00
|
Length:
2,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 08 (100-0451-08)8 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-18/06-TR8 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)0,05 x BPDWM-18/06-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€511.00*
QMN5-M12/00-0200
Cable:
QUANTUM
|
In/Out:
12/00
|
Length:
2,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 12 (100-0451-12)12 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-18/06-TR12 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)0,05 x BPDWM-18/06-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€677.00*
QMN5-M16/00-0200
Cable:
QUANTUM
|
In/Out:
16/00
|
Length:
2,00m
|
Side 1:
NEUTRIK jack stereo
|
Side 2:
NEUTRIK XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 16 (100-0451-16)16 x NEUTRIK® jack (6,3mm), 3-pole , metal-, Soldering-male connector, nickel plated contact(s), straight, nickel (NP3X)0,05 x BPDWM-24/08-TR16 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)0,05 x BPDWM-24/08-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€79.00*
QMHP-M02/00-0200
Cable:
QUANTUM
|
In/Out:
02/00
|
Length:
2,00m
|
Side 1:
HICON XLR male
|
Side 2:
HICON XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 02 (100-0451-02)2 x HI-X3CM-BLK-D0,05 x BPDWM-12/04-TR2 x HI-X3CF-BLK-D0,05 x BPDWM-12/04-TR
Variants from €61.00*
Studio loom
€138.00*
QMHP-M04/00-0200
Cable:
QUANTUM
|
In/Out:
04/00
|
Length:
2,00m
|
Side 1:
HICON XLR male
|
Side 2:
HICON XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 04 (100-0451-04)4 x HI-X3CM-BLK-D0,05 x BPDWM-12/04-TR4 x HI-X3CF-BLK-D0,05 x BPDWM-12/04-TR
Variants from €61.00*
Studio loom
€262.00*
QMHP-M08/00-0200
Cable:
QUANTUM
|
In/Out:
08/00
|
Length:
2,00m
|
Side 1:
HICON XLR male
|
Side 2:
HICON XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 08 (100-0451-08)8 x HI-X3CM-BLK-D0,05 x BPDWM-18/06-TR8 x HI-X3CF-BLK-D0,05 x BPDWM-18/06-TR
Variants from €61.00*
Studio loom
€383.00*
QMHP-M12/00-0200
Cable:
QUANTUM
|
In/Out:
12/00
|
Length:
2,00m
|
Side 1:
HICON XLR male
|
Side 2:
HICON XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 12 (100-0451-12)12 x HI-X3CM-BLK-D0,05 x BPDWM-18/06-TR12 x HI-X3CF-BLK-D0,05 x BPDWM-18/06-TR
Variants from €61.00*
Studio loom
€506.00*
QMHP-M16/00-0200
Cable:
QUANTUM
|
In/Out:
16/00
|
Length:
2,00m
|
Side 1:
HICON XLR male
|
Side 2:
HICON XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 16 (100-0451-16)16 x HI-X3CM-BLK-D0,05 x BPDWM-24/08-TR16 x HI-X3CF-BLK-D0,05 x BPDWM-24/08-TR
Variants from €61.00*
Studio loom
€93.00*
QMMF-M02/00-0200
Cable:
QUANTUM
|
In/Out:
02/00
|
Length:
2,00m
|
Side 1:
NEUTRIK XLR male
|
Side 2:
NEUTRIK XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 02 (100-0451-02)2 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)0,05 x BPDWM-12/04-TR2 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€164.90*
QMMF-M04/00-0200
Cable:
QUANTUM
|
In/Out:
04/00
|
Length:
2,00m
|
Side 1:
NEUTRIK XLR male
|
Side 2:
NEUTRIK XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 04 (100-0451-04)4 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)0,05 x BPDWM-12/04-TR4 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€313.90*
QMMF-M08/00-0200
Cable:
QUANTUM
|
In/Out:
08/00
|
Length:
2,00m
|
Side 1:
NEUTRIK XLR male
|
Side 2:
NEUTRIK XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 08 (100-0451-08)8 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)0,05 x BPDWM-18/06-TR8 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)0,05 x BPDWM-18/06-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€458.00*
QMMF-M12/00-0200
Cable:
QUANTUM
|
In/Out:
12/00
|
Length:
2,00m
|
Side 1:
NEUTRIK XLR male
|
Side 2:
NEUTRIK XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 12 (100-0451-12)12 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)0,05 x BPDWM-18/06-TR12 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)0,05 x BPDWM-18/06-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€605.00*
QMMF-M16/00-0200
Cable:
QUANTUM
|
In/Out:
16/00
|
Length:
2,00m
|
Side 1:
NEUTRIK XLR male
|
Side 2:
NEUTRIK XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 16 (100-0451-16)16 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)0,05 x BPDWM-24/08-TR16 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)0,05 x BPDWM-24/08-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€158.00*
PSN9-M02/00-0200
Cable:
PEGASUS
|
In/Out:
02/00
|
Length:
2,00m
|
Side 1:
NEUTRIK XLR male
|
Side 2:
NEUTRIK XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Pegasus CMCK; S-PVC; black | 4 x 0,20 mm² x number of pairs 02 (100-0501-02)2 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, gold plated contact(s), straight, black (NC3FXX-B)0,05 x BPDWM-18/06-TR2 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black (NC3MXX-B)0,05 x BPDWM-18/06-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€262.00*
PSN9-M04/00-0200
Cable:
PEGASUS
|
In/Out:
04/00
|
Length:
2,00m
|
Side 1:
NEUTRIK XLR male
|
Side 2:
NEUTRIK XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Pegasus CMCK; S-PVC; black | 4 x 0,20 mm² x number of pairs 04 (100-0501-04)4 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, gold plated contact(s), straight, black (NC3FXX-B)0,05 x BPDWM-18/06-TR4 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black (NC3MXX-B)0,05 x BPDWM-18/06-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€461.90*
PSN9-M08/00-0200
Cable:
PEGASUS
|
In/Out:
08/00
|
Length:
2,00m
|
Side 1:
NEUTRIK XLR male
|
Side 2:
NEUTRIK XLR female
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Pegasus CMCK; S-PVC; black | 4 x 0,20 mm² x number of pairs 08 (100-0501-08)8 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, gold plated contact(s), straight, black (NC3FXX-B)8 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black (NC3MXX-B)1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€85.00*
QMNC-M02/00-0200
Cable:
QUANTUM
|
In/Out:
02/00
|
Length:
2,00m
|
Side 1:
NEUTRIK mono jack
|
Side 2:
HICON RCA
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 02 (100-0451-02)2 x HI-CM06-NTL-D0,05 x BPDWM-12/04-TR2 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€160.00*
QMNC-M04/00-0200
Cable:
QUANTUM
|
In/Out:
04/00
|
Length:
2,00m
|
Side 1:
NEUTRIK mono jack
|
Side 2:
HICON RCA
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 04 (100-0451-04)4 x HI-CM06-NTL-D0,05 x BPDWM-12/04-TR4 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-12/04-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€314.90*
QMNC-M08/00-0200
Cable:
QUANTUM
|
In/Out:
08/00
|
Length:
2,00m
|
Side 1:
NEUTRIK mono jack
|
Side 2:
HICON RCA
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 08 (100-0451-08)8 x HI-CM06-NTL-D0,05 x BPDWM-18/06-TR8 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-18/06-TR1 x Cardboard packaging for blister hooks, Design Sommer cable
Variants from €61.00*
Studio loom
€466.00*
QMNC-M12/00-0200
Cable:
QUANTUM
|
In/Out:
12/00
|
Length:
2,00m
|
Side 1:
NEUTRIK mono jack
|
Side 2:
HICON RCA
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 12 (100-0451-12)12 x HI-CM06-NTL-D0,05 x BPDWM-18/06-TR12 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-18/06-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom
€619.00*
QMNC-M16/00-0200
Cable:
QUANTUM
|
In/Out:
16/00
|
Length:
2,00m
|
Side 1:
NEUTRIK mono jack
|
Side 2:
HICON RCA
The bigger your choice, the harder you choose...We offer you a comprehensive range of professionally configured looms for use in studios or live rigs, e.g. for wiring up racks. Since no demands as to road readiness are imposed on some looms and not many mating cycles are required from them, we supply 2 or even 3 quality grades: the BASIC quality is assembled with our numbered SC-QUANTUM HIGHFLEX studio or stage multipair and is fitted with the lower-priced, very solid standard connectors from HICON. The PROFESSIONAL quality comes with Neutrik connectors. This version is mainly used in professional studios where the studio techs set great value on a linear transmission and a perfect shielding. The SC-QUANTUM HIGHFLEX complies with the 110 Ω AES/EBU or DMX standard and can therefore not only be used in the analog world, but also in the digital domain. Of some versions we also deliver an additional quality for which we process the probably best audio multipair SC-PEGASUS available on the market. The SC-PEGASUS is wired in crossover mode and supplied with gold-plated XLR connectors from NEUTRIK®. With a wire/wire capacitance of only 35 pF and a triple shielding (Cu spiral screen + foil for each wire pair + overall Cu braided screen) it's the absolute reference in the field of studio technology wiring. Likewise the SC-PEGASUS can be used for analog as well as (with crossover wiring) digital applications. Please note: professional users most often use only 4- or 8-pair looms because multipairs with more than 8 pairs have a considerable weight and can literally “lever out“ the PCB connections of the input sockets on some synthesizers, workstations, mixing desks or other devices.Configuration: 2,00 m Multipair SC-Quantum QMC; S-PVC; black | 2 x 0,14 mm² x number of pairs 16 (100-0451-16)16 x HI-CM06-NTL-D0,05 x BPDWM-24/08-TR16 x NEUTRIK® jack (6,3mm) 2-pole metal-Soldering-male connector, nickel plated pin, straight, nickel (NP2X)0,05 x BPDWM-24/08-TR1 x KARTONAGE-SCMINI
Variants from €61.00*
Studio loom | XLR 3-pole / Sub-D, NEUTRIK®
€295.00*
MS69-T08/00-0100
In/Out:
08/00
|
Length:
1,00m
Configuration: SUB-D TASCAMFor the SUB-D wiring we offer you a large range of premade looms in various configurations. We use our flexible 8-pair SCMISTRAL multipair cable with pairwise insulation and EMC-compliant all-metal connectors made in Germany for the Sub-D. The standard assignment complies with the analog Tascam DA88 standard. This is also used on analog cards from Yamaha and for Digidesign interfaces as well as for AES/EBU transmissions (Tascam)!!Miscellaneous:Configuration: TASCAM, analogConfiguration: 1,00 m Multipair SC-Mistral MCF; black | 2 x 0,22 mm² x number of pairs 08 | S-PVC (100-0101-08)1 x FCT SUB-D (8-channel)/grade 1, 25-pole , metal-, Soldering-male connector, gold plated contact(s), straight, nickel (FCT25CML-GK1)1 x FCT SUB-D (8-channel)/full metal shell/large cable inlet, metal-, straight, grey (FCT25HM)0,05 x BPDWM-18/06-TR8 x NEUTRIK® XLR, 3-pole , metal-, Soldering-male connector, silver plated contact(s), straight, nickel (NC3MXX)0,05 x BPDWM-18/06-TR
Studio loom | XLR 3-pole / Sub-D, NEUTRIK®
€315.00*
MS69-T00/08-0200
In/Out:
00/08
|
Length:
2,00m
Configuration: SUB-D TASCAMFor the SUB-D wiring we offer you a large range of premade looms in various configurations. We use our flexible 8-pair SCMISTRAL multipair cable with pairwise insulation and EMC-compliant all-metal connectors made in Germany for the Sub-D. The standard assignment complies with the analog Tascam DA88 standard. This is also used on analog cards from Yamaha and for Digidesign interfaces as well as for AES/EBU transmissions (Tascam)!!Miscellaneous:Configuration: TASCAM, analogConfiguration: 2,00 m Multipair SC-Mistral MCF; black | 2 x 0,22 mm² x number of pairs 08 | S-PVC (100-0101-08)1 x FCT SUB-D (8-channel)/grade 1, 25-pole , metal-, Soldering-male connector, gold plated contact(s), straight, nickel (FCT25CML-GK1)1 x FCT SUB-D (8-channel)/full metal shell/large cable inlet, metal-, straight, grey (FCT25HM)0,05 x BPDWM-18/06-TR8 x NEUTRIK® XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, nickel (NC3FXX)0,05 x BPDWM-18/06-TR
Variants from €295.00*
Studio looms sub-d 25-pole male
€475.00*
TF97-F08/08-0200
Cable:
SC-AURA
|
Configuration:
YAMAHA
|
In/Out:
08/08
|
Length:
2,00m
|
Side 1:
SUB-D 25 male
|
Side 2:
NEUTRIK XLR male/female
For the SUB-D wiring we offer you a large range of premade looms in various configurations. We use our flexible 8-pair multipair cable with pairwise insulation and EMC-compliant all-metal connectors made in Germany for the Sub-D. The TASCAM standard assignment complies with the analog Tascam DA88 standard. This is also used on analog cards from Yamaha and for Digidesign interfaces as well as for AES/EBU transmissions (Tascam)! The AES/EBU standard assignment is compliant with YAMAHA's digital AES/EBU 2 x 8 channel standard. Please keep in mind that according to the connected devices, the individually permissible cable length must not be exceeded to ensure an error-free transmission. For information on the maximum permissible cable lengths please refer to the technical data sheets of the hardware you are using.Miscellaneous:Configuration: 1:1 Tascam 8-channelConfiguration: 2,00 m Multipair SC-Transfer AMCK; PUR Master-Blend; black | 2 x 0,14 mm² x number of pairs 16 (100-0401-16)1 x FCT SUB-D (8-channel)/grade 1, 25-pole , metal-, Soldering-male connector, gold plated contact(s), straight, nickel (FCT25CML-GK1)1 x FCT SUB-D (8-channel)/full metal shell/large cable inlet, metal-, straight, grey (FCT25HM)1 x FCT SUB-D (8-channel)/grade 1, 25-pole , metal-, Soldering-male connector, gold plated contact(s), straight, nickel (FCT25CML-GK1)1 x FCT SUB-D (8-channel)/full metal shell/large cable inlet, metal-, straight, grey (FCT25HM)