CARDINAL DVM DVM Series, HDBaseT Built-in Transmitter, W x H x D: 71 mm x 88,9 mm x 44 mm, anthracite

DVM Series, HDBaseT Built-in Transmitter

for integration into SYSBOXX / SYSBOARD / SYSFLOOR / SYSTRUNK as well as SYSDESK System

* HDMI 2.0 input
* transmits FullHD signals up to 70m (230 ft.)
* transmits 4K/UHD signals up to 40m (131 ft.)
* bi-directional transmission of RS232 & IR
* supports HDCP up to V2.2
* supports official PoH standard
* supports 3D, 4K@60fps (420)
* space-savingly integrated rear RJ45 connector
* status LEDs for operation, applied HDMI signal, HDBaseT link
* rear RS232 connection via Euroblock
* local power supply is possible via 2pin Euroblock, if power supply is not given via POH. DC input: 12V 1A
* additional rear side 12V output for power supply of e.g. DVM RS232 pushbutton modules
* IR receiver integrated in front for forwarding IR commands
* recommended cable CAT7 AWG23

Videos

Article number: DVM-HDBT-EX7TSY
EAN: 4049371427463
Brand: CARDINAL DVM
Type: DVM Series, HDBaseT Built-in Transmitter
Colour: anthracite
Width [mm]: 71
Width ["]: 2.7953
Height [mm]: 88,9
Height ["]: 3.5
Depth [mm]: 44
Article number: DVM-HDBT-EX7TSY
EAN: 4049371427463
Brand: CARDINAL DVM
Type: DVM Series, HDBaseT Built-in Transmitter
Colour: anthracite
Width [mm]: 71
Width ["]: 2.7953
Height [mm]: 88,9
Height ["]: 3.5
Depth [mm]: 44

CARDINAL DVM DVM Series, HDBaseT Built-in Transmitter, W x H x D: 71 mm x 88,9 mm x 44 mm, anthracite

Technical Data:

- Article number: DVM-HDBT-EX7TSY

- EAN: 4049371427463

- Brand: CARDINAL DVM

- Type: DVM Series, HDBaseT Built-in Transmitter

- Colour: anthracite

- Width: 71 mm

- Width: 2.7953 "

- Height: 88,9 mm

- Height: 3.5 "

- Depth: 44 mm

Accessories DVM-HDBT-EX7TSY

Rj45 adapter cable + rj45 onezise socket

DVM-HDBT-CAB

Miscellaneous:S/FTP 250 MHz, Cat.6, 4 x 2 x AWG27/7Assignment according to TIA 568RJ45 Onesize jack, Cat.6a, GHMT certified
$15.98*
PoH compatible power supply

DVM-HDBT-POH30

Miscellaneous:PoE standard: IEEE 802.3atInput voltage from 100 to 240 V acMains frequency from 50 to 60 HzPower consumption: max. 0.7AOutput voltage: 55VDCDimensions: 52x35x161mm (WxHxL)Connections: 2xRJ45 (IN/POWERED OUT)power connection: IEC C14 chassis connector1,5m Power cable CEE 7/7 <> IEC C13 includedApplication:PoH compatible power supplySuitable for powering the DVM-HDBT-EX* (from Gen3) and the W45-HDBaseT wallplates
$132.25*

Related products DVM-HDBT-EX7TSY

CARDINAL DVM DVM Series, HDBaseT Built-in Transmitter, W x H x D: 71 mm x 88.9 mm x 44 mm, silver

DVM-HDBT-EX7TSYS

DVM Series, HDBaseT Built-in Transmitterfor integration into SYSBOXX / SYSBOARD / SYSFLOOR / SYSTRUNK as well as SYSDESK System* HDMI 2.0 input * transmits FullHD signals up to 70m (230 ft.)* transmits 4K/UHD signals up to 40m (131 ft.) * bi-directional transmission of RS232 & IR * supports HDCP up to V2.2 * supports official PoH standard * supports 3D, 4K@60fps (420) * space-savingly integrated rear RJ45 connector * status LEDs for operation, applied HDMI signal, HDBaseT link * rear RS232 connection via Euroblock * local power supply is possible via 2pin Euroblock, if power supply is not given via POH. DC input: 12V 1A * additional rear side 12V output for power supply of e.g. DVM RS232 pushbutton modules * IR receiver integrated in front for forwarding IR commands * recommended cable CAT7 AWG23
$402.50*
CARDINAL DVM DVM Series, HDBaseT Built-in Transmitter, W x H x D: 71 mm x 88.9 mm x 44 mm, white

DVM-HDBT-EX7TSYW

DVM Series, HDBaseT Built-in Transmitterfor integration into SYSBOXX / SYSBOARD / SYSFLOOR / SYSTRUNK as well as SYSDESK System* HDMI 2.0 input * transmits FullHD signals up to 70m (230 ft.)* transmits 4K/UHD signals up to 40m (131 ft.) * bi-directional transmission of RS232 & IR * supports HDCP up to V2.2 * supports official PoH standard * supports 3D, 4K@60fps (420) * space-savingly integrated rear RJ45 connector * status LEDs for operation, applied HDMI signal, HDBaseT link * rear RS232 connection via Euroblock * local power supply is possible via 2pin Euroblock, if power supply is not given via POH. DC input: 12V 1A * additional rear side 12V output for power supply of e.g. DVM RS232 pushbutton modules * IR receiver integrated in front for forwarding IR commands * recommended cable CAT7 AWG23
$402.50*
Loading...
Upload in progress, please be patient ...