One for all!These practical HDMI splitters allow you to distribute the signal from one HDMI 2.0 source to 2.4 or 8 HDMI receivers. Ideal for all media, dealer presentation and training facilities. Supports all current HDMI standards and resolutions, such as HDR10, HDCP (up to V2.2), 4K60, 18G, UHD, DTS, Dolby, 3D. Max. HDMI cable length at AWG 26 is 15m each. The three different EDID modes allow safe operation of different sinks: Copy EDID: In this mode, the EDID of the sink on the master output (port 8 on DVM-SP18, port 4 on DVM-SP14, port 1 on DVM-SP12) is adopted for all outputs. Mixed EDID: In this mode the EDID of the sink with the lowest resolution is taken over for all outputs. Auto EDID: In this mode, 4K60 is output by default. Power is provided by a 12 V power supply (included in the delivery).

One for all!These practical HDMI splitters allow you to distribute the signal from one HDMI 2.0 source to 2.4 or 8 HDMI receivers. Ideal for all media, dealer presentation and training facilities. Supports all current HDMI standards and resolutions, such as HDR10, HDCP (up to V2.2), 4K60, 18G, UHD, DTS, Dolby, 3D. Max. HDMI cable length at AWG 26 is 15m each. The three different EDID modes allow safe operation of different sinks: Copy EDID: In this mode, the EDID of the sink on the master output (port 8 on DVM-SP18, port 4 on DVM-SP14, port 1 on DVM-SP12) is adopted for all outputs. Mixed EDID: In this mode the EDID of the sink with the lowest resolution is taken over for all outputs. Auto EDID: In this mode, 4K60 is output by default. Power is provided by a 12 V power supply (included in the delivery).

MADI - or “Multichannel Audio Digital Interface”......is a language currently spoken by a great number of digital mixing console and recording systems. Totether with a sync signal a maximum of 64 audio channels can be transmitted via a single coax line. In most cases digital mixing console systems require 2 coaxial connections between stagerack and console. Our coax multicore and coax hybrid cables can do this – and alot more – using only one compact line.The TRANSIT MC 4400 HD-SDI 4 HD coax and 4 digital-capable NF lines.The TRANSIT MC 5230 HD-SDI combines 5 HD coax with 2 digital-capable NF lines plus a 2.5 mm² power supply in one line.Finally the TRANSIT MC 3231 HD-SDI offers 3 HD coax, 2 digital-capable NF lines, 1 CAT.6a network line and a 2.5 mm² power supply in one line.Advantages:high-quality cable with high-grade connectorscompact design because several coax lines (and in some cases even mains supply & LAN) are combined in one cableless cabling workApplication:Connection of digital mixing console systemsConnection of digital recording systems (OB van)Configuration: 10,00 m video cable Transit 5 HD; 1 x 0,60/2,80; PVC Ø 13,80 mm; black (600-0851-05)5 x NBNC75BFG7-D5 x NBNC75BFG7-D1 x Cardboard packaging for blister hooks, Design Sommer cable

One for all!These practical HDMI splitters allow you to distribute the signal from one HDMI 2.0 source to 2.4 or 8 HDMI receivers. Ideal for all media, dealer presentation and training facilities. Supports all current HDMI standards and resolutions, such as HDR10, HDCP (up to V2.2), 4K60, 18G, UHD, DTS, Dolby, 3D. Max. HDMI cable length at AWG 26 is 15m each. The three different EDID modes allow safe operation of different sinks: Copy EDID: In this mode, the EDID of the sink on the master output (port 8 on DVM-SP18, port 4 on DVM-SP14, port 1 on DVM-SP12) is adopted for all outputs. Mixed EDID: In this mode the EDID of the sink with the lowest resolution is taken over for all outputs. Auto EDID: In this mode, 4K60 is output by default. Power is provided by a 12 V power supply (included in the delivery).

SC-OCTOPUS PUR...Just like the installation version, our super flexible PUR field cable is now fitted with OM3 high-speed glass fibers with no exception. This allows the cost-efficient use of fiber optical systems for mobile applications, as the cable is not thicker or heavier than an NF cable, yet many times more resilient. As with the above-mentioned installation version, the breakout point has our proven dual screw connection with silicone insert.Additionally the splice is fitted with a protective hose to serve as transport protection and also as a pull-in/reeling aid. As with the installation version we use connectors “Made in Germany”, which are assembled by hand, machine-polished and then tagged with a test protocol.Teamed with the proven SCHILL cable reels, we also supply a compact and light-weight reel solution in 2 different versions:1.) with auxiliary coil on the reel side, i. e. 2 m ofthe cable are reeled on an auxiliary winding onthe reel side.2.) with panel connectors on the reel side, i. e. thereel core is equipped with appropriate sockets.Miscellaneous:Singlemode versionConfiguration: 150,00 m Optical fiber SC-Octopus-G; 4 x 9/125 µm OS2; PUR-FRNC Ø 5,50 mm; black (590-0321-04)1 x SCHILL Kabeltrommel, HT380-SW, core: 178 mm, thread width: 142 mm, metal (HT380-SW)4 x +LWL-LCXX/125S2 x +LWL-HOHLLEIT1.21 x LWL-TUBE-04-00501 x SCHILL Winding attachment, for cable splice for GT310, HT and SK-Modelle (KOMB.RM)4 x +LWL-LCXX/125S2 x +LWL-HOHLLEIT1.21 x LWL-TUBE-04-0050

A high-speed OM3 fiber optical line...with a halogen-free jacket for permanent installation is the basis for the ready-made LC and SC breakout cables. The breakouts are delivered on a sturdy wood reel (cable lengths < 30 m are delivered on a smaller space-saving plastic ring). The splice point has a solid double screw connection with a special silicone insert which protects and guides the hollow-core wires and also provides a good strain relief. The PE version has a longitudinal water-tight special jacket which is suitable for underground laying and offers rodent protection. The quality connectors we use are made in Germany, assembled by hand, machinepolished and measured professionally. Each cable is supplied with a test protocol.Configuration: 150,00 m Optical fiber SC-Octopus-G; 12 x 50/125 µm OM3; PE Ø 7,20 mm; black (590-0411-12-OM3)12 x +LWL-LCXX/1256 x +LWL-HOHLLEI0.5M12 x +LWL-LCXX/1256 x +LWL-HOHLLEI0.5M

At the speed of light …Data-intensive HD signals often cause problems with transmission distances above 10 m (32.8 ft.)! The new HDMI®-over-FIBER system from CARDINAL-DVM enables those signals to be transmitted error-free, together with RS232 and infrared information, over distances of up to 300 m (984 ft.) using a single OM3-multimode line. Hereby EDID data are transmitted bi-directionally, and the HDCP copy protection standard is supported up to version 2.2. The integrated EDID manager assists a stress-free and dependable handling of HDMI signals. EDID data sets can be saved and retrieved, the EDID communication can be frozen or simply set to “pathtrough“ which requires the DVM-HDF-USBADAP adapter cable and the PC software. We have integrated the technology into the sturdy and compact housing (known from the DVM-120 series) as a stand-alone version measuring 68 x 36 x 132 mm (2.67 x 1.42 x 5.2 in.). The connectors for power supply, HDMI® and IR/RS232 are robust HICON all-metal types and thus perfectly suitable for the tough use “on the road”. For the reliable connection of the fiber optic cable we use a HICON FIBER4 panel socket with protective cap. Power is fed via a 4-pole male XLR panel connector (pins 1&2: 12-36V, pins 3&4: 0V). The power supply is not included!Advantages:up to 300m transmission distance over multimode fiberssupports HDMI® 1.4 ADVI-support to 1920 x 1200 pxSupports resolutions up to 4K x 2Kcompact and inexpensiveflexiblyTransmission of IR & RS232 control dataMiscellaneous:Note! Power supply must be ordered separately.Application:Transmission of HDMI® signals up to 4K x 2K in mobile production environmentRental

SC-OCTOPUS PUR...Just like the installation version, our super flexible PUR field cable is now fitted with OM3 high-speed glass fibers with no exception. This allows the cost-efficient use of fiber optical systems for mobile applications, as the cable is not thicker or heavier than an NF cable, yet many times more resilient. As with the above-mentioned installation version, the breakout point has our proven dual screw connection with silicone insert.Additionally the splice is fitted with a protective hose to serve as transport protection and also as a pull-in/reeling aid. As with the installation version we use connectors “Made in Germany”, which are assembled by hand, machine-polished and then tagged with a test protocol.Teamed with the proven SCHILL cable reels, we also supply a compact and light-weight reel solution in 2 different versions:1.) with auxiliary coil on the reel side, i. e. 2 m ofthe cable are reeled on an auxiliary winding onthe reel side.2.) with panel connectors on the reel side, i. e. thereel core is equipped with appropriate sockets.Miscellaneous:Multimode versionConfiguration: 300,00 m Optical fiber SC-Octopus-G; 4 x 50/125 µm OM3; PUR-FRNC Ø 5,80 mm; black (590-0311-04-OM3)1 x SCHILL Kabeltrommel, HT380-SW, core: 178 mm, thread width: 142 mm, metal (HT380-SW)4 x +LWL-SCXX/1251 x Sommer cable Front panel with attachment for 4 WU SYSBOXX Front panels for GT310 and HT-model, anthracite RAL7016 (RUND-SYS04)4 x +LWL-SCXX/1252 x +LWL-HOHLLEIT1.21 x LWL-TUBE-04-0050

The HI-FIBER4 SYSTEM...combines two LC-Duplex connections on the surface area of an XLR connector. It locks reliably by push-pull technology, sheltering the delicate interior with a spring-loaded protecting tube and two prongs which also double as a slide-in aid.The properly functioning strain relief with sleeve support and the massive aluminium protective cover guarantee a trouble-free operation under tough conditions on the road.The matching HI-FIBER4-FD socket can either be front or rear mounted in panels with 4 mm max. thickness. It has the same mating pattern on both sides, so alternatively it can be loaded directly with standard LC connectors as well. On the other hand it will also double as a direct extension adapter. The main advantage of the HICON HI-FIBER4-system is its field assembling suitability. SOMMER CABLE offers special tuitions for this purpose. The LC connectors we use are “made in Germany”, assembled by hand, machine-polished and then tagged with a test protocol.We supply 3 different versions:1.) as plain cable2.) as reel version with 2 m end piece on auxiliary coil3.) as reel version with built-in socketMiscellaneous:Multimode versionConfiguration: 100,00 m Optical fiber SC-Octopus-G; 4 x 50/125 µm OM3; PUR-FRNC Ø 5,80 mm; black (590-0311-04-OM3)1 x SCHILL Kabeltrommel, GT310, core: 170 mm, thread width: 132 mm, Solid rubber (GT310)1 x HICON 4 x LC, metal-, Patch-female connector, Type D M3, black (HI-FIBER4-FD)1 x HICON Protective cap with fastening cord for HI-FIBER4-FD (HI-FIBER4-FCAP)1 x Sommer cable Front panel with 1 D-hole (XLR, etc.) for GT310, HT and SK-Modelle, anthracite RAL7016 (RUND01)1 x HICON Push-Pull 4 x LC, metal-, Patch-male connector, straight, silver (HI-FIBER4-MC)1 x Sommer cable Protective Bag for Round plug HI-FIBER4, EP5, Triax connectors 8–11, subsequent assembly possible, grey (BAG-MINI-O)

At the speed of light …Data-intensive HD signals often cause problems with transmission distances above 10 m (32.8 ft.)! The new HDMI®-over-FIBER system from CARDINAL-DVM enables those signals to be transmitted error-free, together with RS232 and infrared information, over distances of up to 300 m (984 ft.) using a single OM3-multimode line. Hereby EDID data are transmitted bi-directionally, and the HDCP copy protection standard is supported up to version 2.2. We have integrated the technology into the sturdy and compact housing (known from the DVM-120 series) as a stand-alone version measuring 68 x 36 x 132 mm (2.67 x 1.42 x 5.2 in.). The connectors for power supply, HDMI® and IR/RS232 are robust HICON all-metal types and thus perfectly suitable for the tough use “on the road”. For the reliable connection of the fiber optic cable we use a HICON-FIBER4 panel socket with protective cap. Power is fed via a 4-pole male XLR panel connector (pins 1&2: 12-36V, pins 3&4: 0V). The power supply is not included!Advantages:up to 300m transmission distance over multimode fiberssupports HDMI® 1.4 ADVI-support to 1920 x 1200 pxSupports resolutions up to 4K x 2Kcompact and inexpensiveflexiblyTransmission of IR & RS232 control dataMiscellaneous:Note! Power supply must be ordered separately.Application:Transmission of HDMI® signals up to 4K x 2K in mobile production environmentRental

Miscellaneous:Lengths above 50 m will be delivered on a reelConfiguration: 3,00 m SC-Octopus Hybrid 224 TPU; fiber: 2 x 9/125 µm; power: 1 x 0,50 mm²; 2 x control Ø 9,20 mm; black (591-2241)

Beam us up...could be the motto for our expanded beam connector (IP67 protection class) according to MIL standard. It combines the latest in optical lens technology with fiber optical transmission. By expanding the light beam with the help of a lens the errorproneness is considerably reduced. This guarantees more stable transmission rates and a trouble-free operation. The plug-in connection is compatible with various systems available on the market.As with all other fiber optical systems we use quality products “Made in Germany” exclusively. Each system is measured with our high-class measuring equipment and tagged with a test protocol. Regarding the cable we chose, again we chose the OM3 version of our SC-OCTOPUS PUR line.We also offer the ready-made FIBER LENS QUAD cable in different versions:1.) as plain cable2.) as reel version with 2 m end piece on auxiliary coil3.) as reel version with built-in socketMiscellaneous:Multimode versionConfiguration: 50,00 m Optical fiber SC-Octopus-G; 4 x 50/125 µm OM3; PUR-FRNC Ø 5,80 mm; black (590-0311-04-OM3)1 x SCHILL Kabeltrommel, GT310, core: 170 mm, thread width: 132 mm, Solid rubber (GT310)1 x FIBERL4M-C1 x SCHILL Winding attachment, for cable splice for GT310, HT and SK-Modelle (KOMB.RM)1 x FIBERL4M-C

SC-OCTOPUS PUR...Just like the installation version, our super flexible PUR field cable is now fitted with OM3 high-speed glass fibers with no exception. This allows the cost-efficient use of fiber optical systems for mobile applications, as the cable is not thicker or heavier than an NF cable, yet many times more resilient. As with the above-mentioned installation version, the breakout point has our proven dual screw connection with silicone insert.Additionally the splice is fitted with a protective hose to serve as transport protection and also as a pull-in/reeling aid. As with the installation version we use connectors “Made in Germany”, which are assembled by hand, machine-polished and then tagged with a test protocol.Teamed with the proven SCHILL cable reels, we also supply a compact and light-weight reel solution in 2 different versions:1.) with auxiliary coil on the reel side, i. e. 2 m ofthe cable are reeled on an auxiliary winding onthe reel side.2.) with panel connectors on the reel side, i. e. thereel core is equipped with appropriate sockets.Miscellaneous:Singlemode versionConfiguration: 100,00 m Optical fiber SC-Octopus-G; 4 x 9/125 µm OS2; PUR-FRNC Ø 5,50 mm; black (590-0321-04)1 x SCHILL Kabeltrommel, GT310, core: 170 mm, thread width: 132 mm, Solid rubber (GT310)2 x +LWL-LCXX/125S2 x +LWL-TUBE1.5X2.91 x SCHILL Winding attachment, for cable splice for GT310, HT and SK-Modelle (KOMB.RM)2 x +LWL-LCXX/125S2 x +LWL-TUBE1.5X2.9

Miscellaneous:

MADI - or “Multichannel Audio Digital Interface”......is a language currently spoken by a great number of digital mixing console and recording systems. Totether with a sync signal a maximum of 64 audio channels can be transmitted via a single coax line. In most cases digital mixing console systems require 2 coaxial connections between stagerack and console. Our coax multicore and coax hybrid cables can do this – and alot more – using only one compact line.The TRANSIT MC 4400 HD-SDI 4 HD coax and 4 digital-capable NF lines.The TRANSIT MC 5230 HD-SDI combines 5 HD coax with 2 digital-capable NF lines plus a 2.5 mm² power supply in one line.Finally the TRANSIT MC 3231 HD-SDI offers 3 HD coax, 2 digital-capable NF lines, 1 CAT.6a network line and a 2.5 mm² power supply in one line.Advantages:high-quality cable with high-grade connectorscompact design because several coax lines (and in some cases even mains supply & LAN) are combined in one cableless cabling workApplication:Connection of digital mixing console systemsConnection of digital recording systems (OB van)Configuration: 25,00 m video cable SC-Vector (RCB); 2 x 0,80; PVC Ø 15,00 mm; blue (600-0162-02)2 x NBNC75BLP9-WOB0,05 x BPDWM-18/06-TR2 x NBNC75BLP9-WOB0,05 x BPDWM-18/06-TR

SC-OCTOPUS PUR...Just like the installation version, our super flexible PUR field cable is now fitted with OM3 high-speed glass fibers with no exception. This allows the cost-efficient use of fiber optical systems for mobile applications, as the cable is not thicker or heavier than an NF cable, yet many times more resilient. As with the above-mentioned installation version, the breakout point has our proven dual screw connection with silicone insert.Additionally the splice is fitted with a protective hose to serve as transport protection and also as a pull-in/reeling aid. As with the installation version we use connectors “Made in Germany”, which are assembled by hand, machine-polished and then tagged with a test protocol.Teamed with the proven SCHILL cable reels, we also supply a compact and light-weight reel solution in 2 different versions:1.) with auxiliary coil on the reel side, i. e. 2 m ofthe cable are reeled on an auxiliary winding onthe reel side.2.) with panel connectors on the reel side, i. e. thereel core is equipped with appropriate sockets.Miscellaneous:Singlemode versionConfiguration: 5,00 m Optical fiber SC-Octopus-G; 4 x 9/125 µm OS2; PUR-FRNC Ø 5,50 mm; black (590-0321-04)4 x +LWL-LCXX/125S2 x +LWL-HOHLLEIT1.21 x LWL-TUBE-04-00504 x +LWL-LCXX/125S2 x +LWL-HOHLLEIT1.21 x LWL-TUBE-04-0050

USB Type A male <> Micro USB B male -integrated RS232 converter technology -for managing the DVM-HDF4/HDO2 series -Length: 1.00m (3.28 ft.)

Attention !!!The German safety plug we use (type EF 7/7) is compatible with the power outlets in France and Belgium. [/ B]Configuration: 1,00 m SC-Monocat Power 414; power: 3 x 2,50 mm²; 4 x CAT.7; DMX: 2 x 0,25 mm²; PVC Ø 27,00 mm; black (500-0191-4)1 x HA-EAV24G401 x HA-MPF1 x HA-MCF084 x HA-MGF-MODUL1 x HA-MDF171 x SCHA-MC115/15-SW4 x NEUTRIK XLR, 3-pole , metal-, Soldering-female connector, silver plated contact(s), straight, chrome-plated (NC3FXX-BAG)4 x Neutrik RJ45 Ethercon CAT.6a, 8-pole , metal-, Clamp technic-male connector, straight, black (NE8MX6-B)1,6 x GEFLECHT2