It does not matter...what shape, the protective bag will keep your multipinconnectors safe from impact, splash water, and otherinconvenient interferences...Since January 2005 the bags are available in differentsizes – also for installation at a later time – suitable forall common multipin and LK connectors made by ILME, LK, HARTIN, VEAM, AMPHENOL, etc.

HDMI wall-mount module/ HDMI CAT.5/6 extender wall moduleThis fully wired HDMI wall module system range in RAL9010 is available in 3 versions.1. Single HDMI wall connection with breakout cable2. Double HDMI wall connection with 2 breakout cables3. HDMI CAT.5/6 extender wall connection with transmitter and receiverThe HDMI extender system consists of a transmitter with a power lead and HDMI socket, a receiver with HDMI socket as well as the corresponding 5 V, 2 A DCtransmitter power supply. The HDMI signal can be transmitted over a max. of 40 metres in a wall- or surface-mounted duct with two CAT.5 AWG24 cables or up to 60 metres with two CAT.6 AWG24 cables. (One CAT lead for sound, one CAT lead for picture).The recommended HDMI cable length from the socket to the component is 2 – 3 metres here. Smaller HD formats (720p, 480p) can be transmitted with longercable lengths than specified.The active signal is displayed on the transmitter and receiver via a red LED. Ideal for communications provision in training and conference rooms.hole size: 60 mm suitable for common flush- and surface-mounted socketsExternal frame dim.: 80.5 mm x 80.5 mm x 33 mmBandwidth: 2.25 Gbit/s

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.SYSWALL front panel HDMI fem. <> HDMI fem. Cover plate: RAL 9010 pure white, not usable with SWAP-1 surface box

Miscellaneous:Incl. labeling option at the top and bottom for paper stripsIncl. strain relief at the rearHigh packing density

HDMI wall-mount module/ HDMI CAT.5/6 extender wall moduleThis fully wired HDMI wall module system range in RAL9010 is available in 3 versions.1. Single HDMI wall connection with breakout cable2. Double HDMI wall connection with 2 breakout cables3. HDMI CAT.5/6 extender wall connection with transmitter and receiverThe HDMI extender system consists of a transmitter with a power lead and HDMI socket, a receiver with HDMI socket as well as the corresponding 5 V, 2 A DCtransmitter power supply. The HDMI signal can be transmitted over a max. of 40 metres in a wall- or surface-mounted duct with two CAT.5 AWG24 cables or up to 60 metres with two CAT.6 AWG24 cables. (One CAT lead for sound, one CAT lead for picture).The recommended HDMI cable length from the socket to the component is 2 – 3 metres here. Smaller HD formats (720p, 480p) can be transmitted with longercable lengths than specified.The active signal is displayed on the transmitter and receiver via a red LED. Ideal for communications provision in training and conference rooms.hole size: 60 mm suitable for common flush- and surface-mounted socketsExternal frame dim.: 80.5 mm x 80.5 mm x 33 mmBandwidth: 2.25 Gbit/s

Multicore cable AURA, gray, 0.50 m (1.64 ft.) Cable: AURA 10 x 2 x 0.15 sq mm (0.0002 sq in.), PVC, black Lefthand plug: 1 x Siemens 30-pin type male, DIN41622 gold-plated contacts 1x metal housing, 30/39-pin, lateral cable outlet Alignment: row 10 to cable Righthand plug: 10 x NEUTRIK® NC3MXX-BAG XLR male, sw Splice with braided sleeve Splice length (incl. connector) 0.4 m (1.31 ft.) Pin assignment pursuant to ADT standardPlease note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.

+++ ATTENTION: These are reduced items of the old SYSFLOOR-06 series with high bore tolerances, which complicate the attachment of the SYSBOXX sheets. +++FLOOR TANK INSERT WITH SYSTEM (modular equipping)The ideal, extremely stable mounting frame for integrating audio/video/media and domestic installation connections in floor tank connection units. SYSFLOOR is available in three different versions:1. The SYSFLOOR-06 can be fitted on 9.5”, 6+2+2 WU with up to 16 x D-flange plus, for example, 2 additional Schuko positions as required and provides optimum installation options due to the stable strain relief ring with 19 cable fixing positions.2. The SYSFLOOR-04 can accommodate up to 10 x D-flange or appropriate media interfaces on 4 WU.3. The SYSFLOOR-03 can accommodate up to 8 x D-flange or appropriate media interfaces on 3 WU.The insert size of the SYSFLOOR-03 is equal to a GB2 mounting box (or a GB3 mounting box with the SYSFLOOR-04 resp.). This makes it possible to install SYSBOXX together with domestic installation components in one box. The insert size of the SYSFLOOR-06 is equal to 3 GB3 mounting boxes. Due to the slanted connection plane the cover of the floor tank can be closed even with plugged-in multipin connectors*. Owing to the generous space conditions power supplies and active converters (or the like) can be neatly tucked away in the floor box.The mounting frames are compatible with round and square OBO BETTERMANN/ACKERMANN equipment inserts (e.g. GESR9) and fitted with fixing holes in the 5.08 mm / 0.2" spacing (for self-tapping M2.5 screws) and installation accessories. The PE connection requires an earth bolt and naked, conductive locating surfaces for the front panels. SYSFLOOR-03/-04 are supplied with 25 front panel screws, the SYSFLOOR-06 comes with 50 front panel screws. The matching front panels for individual loading are shown on the following pages.Supplied accessories: SYSFLOOR-06 Frame4x SYSFLOOR-MB mounting panel for OBO-BETTERMANN floortanksystems50x S-G2,5x08S-TS countersunk screw Torx 8 for front panels & installation parts

Fiber set 12-channel (FIBER12M), 200m + 2 x 12-way LC breakout boxes ------------------------------------------------------------------------------ Cable drum GT450 Cable: FO 12G 50/125µm PUR OM3 Connector left: 1 x FIBERLENS 12CH connector IP68, junior size, multimode cable end on KOMB.RM Connector right: 1 x FIBERLENS 12CH connector IP68, junior-size, multimode Assignment: A1->B1, B1->A1, A2->B2, B2->A2 ------------------------------------------------------------------------------ 2 x SB-1871 junction box, 19" 1U: SYSPAN5 with FIBER-12M <> 3 x FIBER4 = 3 x 4 x LCCompatible to HI-FIBER4 connector or alternatively to 4 single LC connectors ------------------------------------------------------------------------------ ------------------------------------------------------------------------------Configuration: 200,00 m Optical fiber SC-Octopus-G; 12 x 50/125 µm OM3; PUR-FRNC Ø 7,00 mm; black (590-0311-12-OM3)1 x SCHILL Kabeltrommel, GT450, core: 296 mm, thread width: 187 mm, Solid rubber (GT450)1 x FIBERL12M-C1 x SCHILL Winding attachment, for cable splice for GT310, HT and SK-Modelle (KOMB.RM)1 x FIBERL12M-C

The SYC1-3501 module brings the often presumed dead TT-Phone jack into the SYSBOXX! It will give you what many people have been seeking for so long: an ultra compact TT-Phone module which provides 16 patch points on only one width unit in the SYSBOXX format. The module can be configured via jumpers to all possible operating modes (normalization: without/half/full, grounding: fully separated/top/bottom connected). On the rear side the module relies on the full modularity of the SYSBOXX flat ribbon cable system. The large range of SYSBOXX modular boards (XLR, combo jack, DB25, multipins, Euroblock) can be easily connected via 4-pole locking tab connectors. Mechanically the sky is the limit: for rack installation the module can be integrated into the SYSPAN5XL, the PBA2-SYS12 or also into any SYSBOXX frame with 2 or more depth units.

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.Front panel: RAL 9010 pure white Front connections: 1 x s-video female, 2 x RCA female (red, white) Rear connections: 1 x s-video female, 2 x RCA female (red, white)

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.Front panel: RAL 9010 pure white Front connections: 1 x SUBD15HD female 1 x 3.5 mm (1/8“) stereo jack socket Rear connections: 1 x SUBD15HD female 2 x RCA female red/white

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.SYSWALL front panel 3 x RCA YUV Cover plate: RAL 9010 pure white Front connections: 3 x RCA female (red, green, blue) Rear connections: 3 x RCA female (red, green, blue)

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.SYSWALL front panel 2 x RCA stereo fem. <> fem. Cover plate: RAL 9010 pure white

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.SYSWALL adapter frame 55 x 55 x 8,5 mm rounded, matches Busch Jäger Reflex SI Legrand Serie Creo

Please note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.