SYSDESK Desk Connect Panel

Products

Distribution Systems

SYSDESK Desk Connect Panel

Filter

CARDINAL DVM
Sommer cable
SYSDESK

Cable management tray
Connector Module
Connector Module
Desk tank incl. 2 Schukos with adapter for 4 x SYSWALL50 modules
Front panel
Switch-module
front panel
table insert box

RAL 9010 pure white
grey
white

1 x D-hole
1 x D-hole, 90 ° turned
1 x D-hole centered
1 x DisplayPort fem. -> 1 x DisplayPort male 1,00m
1 x HDMI/DP
1 x HDMI fem. -> HDMI male 0,50m
1 x M20x1.5
1 x NAC3FPX
1 x NAC3PX
1 x PG21
1 x SBC22-3SP
1 x SCHUKO
1 x SUB-D09 or HDMI + 2 x Keystone 90° angled
1 x punch 28.4x28.4
1x DISPLAYPORT female 1x DP cable connector, L=0,5m
1xLNL8+2xNL4
1x VGA female + 1x 3,5mm jack socket > 1x VGA cable plug, L=1,00m + 2x cinch cable socket, L=0,15m
1x VGA female + 1x 3.5mm jack female, stereo + 1x HDMI female > 1x VGA cable socket, L=0.20m + 1x 3.5mm jack cable socke
2 x 8 TT-Phone 4.4 mm (0.17 in.)
2 x 70 mm rail suitable for up to 9 TE automaton each 17.5mm -for use with SYP2 profile
2 x Antenna socket
2 x Cutouts for clip-in modules (Keystrone)
2 x D-Series cutout, 90° angled
2 x D-hole
2 x Keystone
2 x NAC3FPX
2xRCA fem. fem. white-red
3 x 2P+T female -> Wieland GSD18 female, cascadable
3 x 2P+T female SNAP-In
3 x Cutouts for clip-in modules (Keystrone)
3 x Keystone
3 x NL8
3 x RCA female patch A/V
3 x RCA female patch YUV
3 x Schuko-SNAP-In-Hole
3 x Schuko female -> Wieland GST18i3 female, cascadable
3 x Snap-In Schuko-Buchse weiß
3 x snap-in Schuko socket black
3 x snap-in Schuko sockets
3 x socket swiss standard snap-in
6 x D-SUB25
6 x punch 24,2x7,5
6 x punched holes for KEYSTONE
8 x A / B-Hole
8 x punch for NEUTRIK A/B type
10 x D-flange
12 x 3-pole EUROBLOCK 3.5 mm (1/8“)
16xTTPhone
70 mm rail fits 4TE automaton each 17.5mm
Brushed stainless steel with "push to lift"-feature
Cable feed Ø =12 mm
D-Series cutout - angled
DVI24+5 + 3,5 mm stereo jack fem. -> 0,15m cable DVI + 2 x RCA fem.
DVI24+5 + 3,5 mm stereo jack fem. -> 0,15m cable DVI + 3,5 mm stereo jack fem.
DVI 24+5 + 3.5 mm stereo mini jack fem. -> Plug-in / screw terminal
Displayport female —> Displayport-installation female
Front panel, gray RAL7016, HDMI, VGA mini jack HDBaseT
Front panel, pure white RAL9010, HDMI, VGA mini jack HDBaseT
Front panel, white aluminum RAL9006, HDMI, VGA mini jack HDBaseT
HDMI / VGA cut out
HDMI fem. —> Plug-in / screw terminal
HDMI female -> 0,15m cable HDMI female
HDMI female Patch
HDMI female —> HDMI male 0,30 m
Modul zur Aufnahme von 3 x Snap-In-Steckdose D=50mm
Rear side with WIELAND gesisCON GST18i3 │Fit-in plug + socket, contact protected
Stainless steel finish with "push to lift" feature
Stainless steel look, lockable with "push to lift" feature
Switch on / off + stereo volume -> solder contacts
USB 2.0 fem. -> 4-pin screw terminal.
VGA + 3,5 mm stereo jack fem. -> 0,2m cabel 5xBNC + 3,5 mm stereo jack fem.
VGA + 3,5 mm stereo jack fem. -> 0,2m cabel VGA + 3,5 mm stereo jack fem.
VGA + 3,5 mm stereo jack fem. -> 0,2m cable 5xBNC + 2x RCA fem.
VGA + 3,5 mm stereo jack fem. -> 0,15m cable VGA + 2 x RCA fem.
VGA + 3,5 mm stereo jack fem. -> VGA patch + 0,15m cabel 2x RCA fem.
VGA + 3,5 mm stereo mini jack fem. -> Patch VGA + 0.15 m breakout cable 3.5 mm stereo mini jack fem.
VGA fem. + 3.5 mm stereo mini jack fem. -> Plug-in / screw terminal
VGA fem. -> 0,2 m break out cable VGA fem. + 3,5 mm stereo jack fem. -> 0,15 m break out cable + HDMI female -> 0,2 m br
anthracite
anthracite, lockable
anthracite, lockable and with "push to lift" feature
anthracite with "push to lift" feature
blank panel
brushed stainless steel
powerCON T1 (NAC3FPX)
powerCON T1 DUPLEX (NAC3PX)
stainless steel finish
stainless steel finish, lockable
white
white, lockable
white, lockable and with "push to lift" feature

Designed for HDMI & DP breakout cables and HDMI or USB-board modules
Hole assembly suitable for SYFB23-8D!
SYS-series
SYSBOXX-Module
SYSWALL50-Modules
Suitable for 2 x NEUTRIK® NAC3FPX powerCON® TRUE1
for SYKP SYSBOXX cassette profile
for SYPK SYSBOXX cassette profile
for receiving a 2-hole antenna socket from the W45 series
for use with SYP2 profile
in combination with a SYSTRUNK or SYSBOXX enclosure for individual speaker box constructions
only for cicuit board module SBC22-3SP
suitable 1x NEUTRIK® NAC3FPX powerCON® TRUE1
suitable 1x NEUTRIK® NAC3PX powerCON® TRUE1

2x 2xM3 thread for connector front mounting
Connectors vertically aligned

Minimum $

–

Maximum $

front panel blank panel, 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: anthracite, RAL 7016

SYFB21-L

Please order screws separately

$17.76*

front panel 2 x D-hole, 2 HE, 1 BE for SYS-series, 2.5 mm galvanized steel sheet, colour: grey

SYFB21-2D0

$20.13*

front panel 2 x D-Series cutout, 90° angled, 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB21-2D

Please order screws separately

$20.13*

front panel blank panel, 2 HE, 3 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB23-L

Please order screws separately

$21.85*

front panel blank panel, 2 HE, 6 BE for SYS-series, colour: grey

SYFB26-L

Please order screws separately

$28.75*

front panel 1 x D-hole, 2 HE, 1 BE for SYS-series, 2.5 mm galvanized steel sheet, colour: grey

SYFB21-1D0

$25.30*

front panel 3 x Cutouts for clip-in modules (Keystrone), 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB21-3KEYSTONE

Please order screws separately

$34.50*

front panel 2 x Cutouts for clip-in modules (Keystrone), 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB21-2KEYSTONE

Please order screws separately

$34.50*

front panel D-Series cutout - angled, 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB21-1DA

Versions update September 2020: The panel is now equipped with four additional countersunk holes for combination with the SYSBOXX cassette profile.Please order screws separately

$29.90*

Connector Module 3 x snap-in Schuko sockets, 2 HE, 4 BE for SYS-series, colour: anthracite, RAL 7016

SYC4-4025

Please order screws separately

$70.15*

front panel Cable feed Ø =12 mm, 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: anthracite, RAL 7016

SYFB21-1KD

Please order screws separately

$44.27*

front panel 1 x SCHUKO, 2 HE, 2 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB22-SCHUKO

$20.71*

front panel 10 x D-flange, 2 HE, 4 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB24-10D

Please order screws separately

$50.48*

front panel 1 x D-hole, 90 ° turned for for SYKP SYSBOXX cassette profile, 2.5 mm galvanized steel sheet, colour: grey

SYPFB1-1D

$22.20*

front panel 1 x NAC3FPX, 2 HE, 1 BE for SYS-series, 2.5 mm galvanized steel sheet, colour: grey

SYFB21-NAC3FPX

$28.18*

Connector Module HDMI female -> 0,15m cable HDMI female, 2 HE, 1 BE for SYS-series, colour: anthracite, RAL 7016

SYC1-1158

Please order screws separately

$67.28*

front panel 2 x NAC3FPX, 2 HE, 1 BE for Suitable for 2 x NEUTRIK® NAC3FPX powerCON® TRUE1, 2.5 mm galvanized steel sheet, colour: grey

SYFB21-NAC3FPX2

$33.93*

front panel 1 x SCHUKO, 2 HE, 2 BE for SYS-series

SYFS22-SCHUKO

SYSBOXX front panel 2HE 2BE 1x SCHUKOfor SYSBOXX MKIIRAL9006

$29.90*

front panel 1 x D-hole, 90 ° turned, 2 HE, 1 BE for SYS-series, 2.5 mm galvanized steel sheet, colour: grey

SYFB21-1D-KP

$27.03*

front panel 1 x NAC3PX, 2 HE, 1 BE for SYS-series, 2.5 mm galvanized steel sheet, colour: grey

SYFB21-NAC3PX

$32.78*

table insert box anthracite, 2 HE, 9 BE; depth: 193 mm for SYSBOXX-Module, colour: grey

SYSDESK-AZ

Mr Clean…A neat and tidy look for your desktop and every conference room. The SOMMER CABLE SYSDESK 09 has a solid stainless steel or powder coated all-metal enclosure which can be loaded with all available 2 RU SYSBOXX front panel modules. This ensures maximum versatility and you're always ready for new market standards. Up to 9 width units can be fitted. But also the inner values of the desk installation tank are not to be scoffed at: the SYSDESK 09 has an integrated cable strain relief, a dust protection brush in the cable feed-in slot as well as an innovative table mounting fixture (plate thickness from 10 mm / 0.4 in. to almost open end!). The SYSDESK 09 can be continuously grounded for use with power connectors. For mains supply we recommend the super compact (SYCFB24-3SCHU-WL) triple power outlet module with Wieland power connectors on the rear side which allow a simple cascading of several consolidation points. Our Syswall 45 clip-in modules can also be integrated here. Optionally the SYSDESK is available as a locking version (order suffix „-L“). This will save all school caretakers from the tedious removal of chewing gum residue in the connectors. NOTE!! The item on offer is merely the desk mounting frame without the installed equipment as shown!

$577.30*

front panel 3 x Schuko-SNAP-In-Hole, 2 HE, 4 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB24-3SCHU

Please order screws separately

$36.22*

Connector Module 3 x Schuko female -> Wieland GST18i3 female, cascadable, 2 HE, 4 BE for SYS-series, colour: anthracite, RAL 7016

SYC4-4096

Please order screws separatelyNon-compatible with the SYSTRUNK series and the SYSFLOOR-03/-04 (alternatively please use SYC4-4025 + 3 x SCHU-BSNG here)

$126.50*

front panel 1 x D-hole centered, 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey

SYFB21-1DM

Please order screws separately

$25.30*