Miscellaneous:incl. 1.5m AC cable, Euro plugApplication:1 x USB-C PD3.0 (max. 65W)1 x USB-C PD3.0 (max. 20W)2 x USB-A QC (je max. 18W)Input voltage: 100-240V AC 50/60Hz, 2A max. IEC C8 chassis connectorSupported charging standards: USB-C: PPS 3.3-11V-5A, QC3.0, AFC, FCP, SCP, PD3.0USB-A: Apple 5V2.4A, BC1.2, QC3.0/QC2.0, AFC, FCP, SCP, MTK

HDBaseT Extender Set HDMI + IR + RS232 up to 70m-HDBaseT-Transmitter-HDBaseT-Receiver-1x Power Supply 24V-1x IR-Transmitter-1x IR-Receiver-2x RS232 cable adapters* supports HDMI 2.0b, 18G* transmits FullHD signals up to 70m/230ft* transmits UHD signals up to 40m/130ft* transmits RS232 & IR bidirectional* supports HDCP (up to V2.2)* supports official PoH standard - the PSU must be connected to the transmitter!* supports 3D, 4K@60fps 4:4:4* recommended cable: CAT.7 AWG23* ultra compact design

One for all!These practical HDMI splitters allow you to distribute the signal from one HDMI 2.0 source to 2.4 or 8 HDMI receivers. Ideal for all media, dealer presentation and training facilities. Supports all current HDMI standards and resolutions, such as HDR10, HDCP (up to V2.2), 4K60, 18G, UHD, DTS, Dolby, 3D. Max. HDMI cable length at AWG 26 is 15m each. The three different EDID modes allow safe operation of different sinks: Copy EDID: In this mode, the EDID of the sink on the master output (port 8 on DVM-SP18, port 4 on DVM-SP14, port 1 on DVM-SP12) is adopted for all outputs. Mixed EDID: In this mode the EDID of the sink with the lowest resolution is taken over for all outputs. Auto EDID: In this mode, 4K60 is output by default. Power is provided by a 12 V power supply (included in the delivery).

HDBaseT transmitter HDMI + IR + RS232 up to 70m-HDBaseT-Transmitter-IR-Receiver-RS232 cable adapter* supports HDMI 2.0b, 18G* transmits 1080p up to 70m/230ft* transmits 4Kx2K ub to 40m/130ft* transmits RS232 & IR bidirectional* supports HDCP up to V2.2* supports official PoH standard (from sender to receiver)* supports 3D, 4K@60fps (4:4:4)* recommended cable: CAT7 AWG23* ultra compact design

HDMI® under controlWhether in the installation or rental business - thepractical HD tools of the CARDINAL DVM series offer a convincing quality and a unique value-for-money ratio.DVM-HDT-AUDEX – HDMI®2.0 Audio Extractor & Embedder 18GYou want to extract audio information from the HDMI data stream or exchange the audio signal contained in the stream? No problem with the DVM-HDT-AUDEX. It provides the extracted information analog through a MiniJack socket or digital via an RCA S/PDIF interface. All common PCM HDMI ® audio formats and video resolutions will be supported.Advantages:Power supply DC connectors with screwuniform power unit with all HD ToolsRugged housing in timeless designfully compatible with HDMI® 2.0supports audio up to 192 kHzsupports CECsupports resolutions up to 4K60-444 and 3Dmaximum video bandwidth 18 Gbpslossless conversion of 7.1 to stereoBuilt-in EDID managerWorks also without a connected sinkApplication:HDMI® audio rendering on devices without HDMI ™ interfaceFeed in your own audio information in an HDMI® stream

One for all!These practical HDMI splitters allow you to distribute the signal from one HDMI 2.0 source to 2.4 or 8 HDMI receivers. Ideal for all media, dealer presentation and training facilities. Supports all current HDMI standards and resolutions, such as HDR10, HDCP (up to V2.2), 4K60, 18G, UHD, DTS, Dolby, 3D. Max. HDMI cable length at AWG 26 is 15m each. The three different EDID modes allow safe operation of different sinks: Copy EDID: In this mode, the EDID of the sink on the master output (port 8 on DVM-SP18, port 4 on DVM-SP14, port 1 on DVM-SP12) is adopted for all outputs. Mixed EDID: In this mode the EDID of the sink with the lowest resolution is taken over for all outputs. Auto EDID: In this mode, 4K60 is output by default. Power is provided by a 12 V power supply (included in the delivery).

DVM-120 SERIESThe CARDINAL DVM-120 series is exploring new avenues in the field of active components and audio tools. Hereby proven designs served as models for us, which we have now revamped into a series with a new housing concept. The new single-channel boxes DVM-120-DIS and DVM-120-DISH combine an extremely compact housing with the same electrical features of the well-known dual-channel units DVM-120-DID or DVM-120-DIDH resp. and a very interesting entry-level price.DVM-120-DID Direct Box – the classic!These classic DI boxes have been developed for a simple and reliable adaptation of mid- and high-impedance signal sources to microphone inputs. We use high-quality transformers from Swedish manufacturer LUNDAHL. With 17 dB of attenuation they are particularly suited for applications with very high levels at super low distortions and a neutral behaviour down to very low frequencies. Each channel has two bridged 1/4“ (6.3 mm) jack sockets, the 2-channel version also offers a 1/8“ (3.5 mm) stereo mini jack socket including a switch for multimedia applications. If required, the groundlift push-button will link the input and output earths. The output signals are present on male XLR connectors.Advantages:Uncompromising mechanical design – due to 18 mm recessed front panels, 3 mm thick aluminium profile & inset stacking feetIntegrated wide-range mains supplies (90 – 240 V) – direct connection via IEC switch/fuse combinationDeveloped for highest audiophile requirementsExclusive use of high-quality componentsApplication:Super high-grade audio tools and ideal helpers for live and studio applications

HDMI® under controlWhether in the installation or rental business - thepractical HD tools of the CARDINAL DVM series offer a convincing quality and a unique value-for-money ratio.DVM-HDT-SDI-HDMI – HD-SDI HDMI® converterThis converter links devices with an HDMI® interface to professional SDI equipment, thereby supporting all SDI formats up to 3G-SDI.Accepted input signals:• SD: 480i at 60 fps / 576i at 50 fps• HD 720p at 50 and 60 fps• HD 1080i at 50 and 60 fps• FULL-HD 1080p at 24, 25, 30, 50 and 60 fpsThe fed-in SDI signal is available at a link output for further distribution within the SDI signal chain.Advantages:Power supply DC connectors with screwuniform power unit with all HD ToolsRugged housing in timeless designadditional SDI-Link output with integrated re-clockingVideo bandwidth 270 M ... 2.97 GbpsPlug & PlayApplication:Connecting SDI to 3G-SDI equipment toHDMI® devices

One for all!These practical HDMI splitters allow you to distribute the signal from one HDMI 2.0 source to 2.4 or 8 HDMI receivers. Ideal for all media, dealer presentation and training facilities. Supports all current HDMI standards and resolutions, such as HDR10, HDCP (up to V2.2), 4K60, 18G, UHD, DTS, Dolby, 3D. Max. HDMI cable length at AWG 26 is 15m each. The three different EDID modes allow safe operation of different sinks: Copy EDID: In this mode, the EDID of the sink on the master output (port 8 on DVM-SP18, port 4 on DVM-SP14, port 1 on DVM-SP12) is adopted for all outputs. Mixed EDID: In this mode the EDID of the sink with the lowest resolution is taken over for all outputs. Auto EDID: In this mode, 4K60 is output by default. Power is provided by a 12 V power supply (included in the delivery).

DI-BOXENare used for adaptation. The DI-box can convert high resistance, unbalanced signals coming from electrical music instrument, such as keyboard, CD-players as well as speaker outputs and adapt to them, producing a low resistance, balanced microphone input on stageboxes or mixing boards.The passive DI-box covers more than 90 % of all standard applications. We have selected a few high quality DI- and split boxes made by Palmer just for you.Passive DI-Box with stainless steel casing. Jack input with parallel output to loop the signal through. Transformer-balance XLR-output. Input sensibility adjustable. Line and speaker signal levels can be processed. Input impedance: 68 kΩ, output impedance 600 Ω.Transmission ratio balancing transmitter: 10:1Max. output level: +6 dBu, ground lift switch

With this adapter you convert a VGA output into an HDMI output. The additional integrated 3.5mm audio cable is used to embed analog audio signals from the source into the HDMI stream.Advantages:supports all VGA resolutions up to 1920 x 1080 (60Hz)Cable lengths:3.5 mm jack cable 0.5 mVGA cable 0.15 m+ USB Micro-B cable 0.5 mMiscellaneous:External power supply via USB Micro-B socketConnector details: VGA connector male with locking screws, molded: 4.5 cm x 3.5 cm x 1.5 cmHDMI socket type A in compact metal housing: 5.5 cm x 3.8 cm x 1.3 cmSignal direction: unidirectional (source= VGA; sink = HDMI)Application:Connection of analog computer signals to HDMI® portsMobile A / V applications of all kinds

Welcome to the Matrix!Whether in the catering business, retail trade or in the field of digital signage – with the Matrix systems of the CARDINAL DVM series the free distribution of all input signals to any outputs is done as easily as never before. In a sports bar, for example, you can switch between the live TV signal on input 1 and the video server for promotion on other inputs. And this individually for each display!The employed HDBaseT technology easily allows HDMI ® transmission distances of up to 70 metres / 230 feet between Matrix and display. And owing to PoH (Power over HDBaseT) remote receivers will also be powered in one go.This saves extra power supplies. For us the support of all HDMI ® functions, resolutions and formats up to 4Kx2K, 3D, 48-bit Deep Colour and HDCP is a self-evident feature. Likewise the audio section has all common formats such as Dolby True HD or DTS-HD as well.Speaking of management: the control functions are executed directly via push-buttons and display on the device or by means of the infrared remote control. Alternatively you can use the supplied PC software or existing media controllers via RS232 or ethernet (TCP/IP). Moreover, the integrated EDID management ensures a fast and stressless setup.Features DVM-HDBT-MAT44:• Inputs & outputs:4 x HDMI ® Inputs 2 x HDMI ® Outputs 4 x HDBaseT outputs (parallel to HDMI ® ) 5 x IR control inputs (4 x for HDBaseT with PoH 70 m (230 ft.), 1 x general) 4 x IR control output (from HDBaseT) 4 x RS232 interfaces for HDBaseT• HDBaseT lite (max. 70 m (230 ft.): 1080p; 40 m (131 ft.): 4Kx2K)• IR matrix function• Ethernet connection 10/100 BaseT• RS232 connection (SUB-D09)• Fast switching time• Two external 12 V / 5 A power supplies included (1 x device power, 1 x PoH)• 19“ rack enclosure with 1 RU and 245 mm (9.6 in.) depth, 2.7 kg (5.96 lbs.)• Suitable HDBT receiver DVM-HDBT-EX07-R• Supports HDCP 2.2

DVM Series, HDBaseT Built-in Transmitterfor integration into SYSBOXX / SYSBOARD / SYSFLOOR / SYSTRUNK as well as SYSDESK System* HDMI 2.0 input * transmits FullHD signals up to 70m (230 ft.)* transmits 4K/UHD signals up to 40m (131 ft.) * bi-directional transmission of RS232 & IR * supports HDCP up to V2.2 * supports official PoH standard * supports 3D, 4K@60fps (420) * space-savingly integrated rear RJ45 connector * status LEDs for operation, applied HDMI signal, HDBaseT link * rear RS232 connection via Euroblock * local power supply is possible via 2pin Euroblock, if power supply is not given via POH. DC input: 12V 1A * additional rear side 12V output for power supply of e.g. DVM RS232 pushbutton modules * IR receiver integrated in front for forwarding IR commands * recommended cable CAT7 AWG23

DVM-SP4601 4 x 6.5"/1" Column SpeakerThe DVM-SP4601 universal column speaker is equipped with four 6.5" chassis plus one 1" driver on a radial horn and scores with precise radiation, excellent sound quality, very high sound pressure level and easy mounting. The result is an excellent speech intelligibility – even in larger or acoustically critical rooms, which makes the loudspeaker a superb choice for largerauditoriums or lecture halls.The cabinet has 8 x M8 flying points and can bemounted safely and accurately with the optional DVM-SP46-WM-WS wall-mount adapter.Advantages:compact and powerful systemseasy, assembly by plurality of mounting pointsadaptation by friendly requested RAL color optionFull range of accessories available

HDBaseT output card for DVM Modular MatrixULTRA 4K SEAMLESS Module* HDBaseT output card 70 m (230 ft.)* Connections: -HDBaseT output -RS232 interface -Audio out 3-pin analog -IR In & Out (2 x 3.5 mm / 1/8“ jack)* Transmits UHD signals over max. 40 m (131 ft.)* Bi-directional RS232 & IR transmission* Integrated power supply for HDBaseT RX (official PoH standard)* True seamless switching* Supports HDMI 2.0* Supports HDCP up to V2.2* Supports 3D, 4K@60fps (420)* Recommended cable: CAT7 AWG23

The modular 4K UHD matrix with 16 slots for audio, video and media......from CARDINAL DVM puts an end to fixed input and output configurations - because a total of 16 slots are available for HDMI, HDBaseT, VGA or audio plug-in cards. 12 of the slots can be used for either input or output cards, while the other 4 slots accommodate output cards only. This allows configurations from 1-to-15 to 12-to-4. Each video card is equipped with an extensive EDID management as well as a HighEnd scaling chip, which always ensures the best picture quality and an optimized aspect ratio. The HDMI as well as HDBaseT input and output cards support UHD signals with up to 60 frames per second (4K60) and thereby the current encryption standard HDCP2.2. In addition, the power supply of the connected HDBaseT components is supported by means of the official PoH standard. All extender systems including wall plates from CARDINAL DVM can be operated with this. All cards also offer analog audio connections via Euroblock connectors. The HDBaseT cards are also equipped with an additional RS232 interface for direct tunneling of control data. The additional audio card DVM-HDBT-M-OAU provides a mic/line input and extensive audio mixing capabilities for two outputs. In addition, it allows audio embedding and de-embedding for the signals of all other installed cards. Switching between signals takes place seamlessly without interruption (seamless switching). Upgrades or additions can be implemented without much effort thanks to hot-plug support. The matrix is controlled directly on the device via capacitive touch keys, via RS232, via TCP or via the user-friendly web interface (GUI). Extensive control command lists are available for integration. Dimensions: 19", 3U, depth 320 mm Please select your required input and output cards via the accessories.Details in overview:* Ultra flexible, modular design: slots 1-12 for input & output cards slots 13-16 for output cards* 1x15 to 12x4 configurations possible* input & output cards available for the following formats: HDMI 2.0, HDBaseT 70m, VGA + AUDIO (only input), AUDIO (in & out combi card)* Bi-directional RS232 & IR transmission* Integrated power suppy for HDBaseT TX/RX (official PoH standard)* True seamless switching* Integrated scaler for outputs* Supports HDCP up to V2.2* Comprehensive EDID management* Control via RS232, Ethernet & IR* Integrated HDCP management* Integrated RS232 matrix for receiver* Supports 3D, 4K@60fps (420)* Recommended cable: CAT7 AWG23

Hardshell case for DVM-HDT-KIT-DESK incl. perfect fitting foam inlay Internal structure Inner dimensions: 327 x 234 x 106 mm (12.9 x 9.2 x 4.2 in.) Outer dimensions: 345 x 308 x 113 mm (13.6 x 12.1 x 4.4 in.)

Welcome to the Matrix!Whether in the catering business, retail trade or in the field of digital signage – with the Matrix systems of the CARDINAL DVM series the free distribution of all input signals to any outputs is done as easily as never before. In a sports bar, for example, you can switch between the live TV signal on input 1 and the video server for promotion on other inputs. And this individually for each display!The employed HDBaseT technology easily allows HDMI ® transmission distances of up to 70 metres / 230 feet between Matrix and display. And owing to PoH (Power over HDBaseT) remote receivers will also be powered in one go.This saves extra power supplies. For us the support of all HDMI ® functions, resolutions and formats up to 4Kx2K, 3D, 48-bit Deep Colour and HDCP is a self-evident feature. Likewise the audio section has all common formats such as Dolby True HD or DTS-HD as well.Speaking of management: the control functions are executed directly via push-buttons and display on the device or by means of the infrared remote control. Alternatively you can use the supplied PC software or existing media controllers via RS232 or ethernet (TCP/IP). Moreover, the integrated EDID management ensures a fast and stressless setup.DVM-HDBT-MAT44 features:• Ins & Outs:4 x HDMI ® inputs4 x HDMI ® outputs 4 x HDBaseT outputs (parallel to HDMI ® ) 5 x IR control inputs (4 x for HDBaseT, 1 x general)4 x IR control output (from HDBaseT)4 x RS232 interfaces for HDBaseT • HDBaseT lite (max. 70 m / 230 ft. 1080p, 40 m / 131 ft. 4K x 2K)• IR matrix function• 10/100 BaseT Ethernet connection• RS232 connection (SUB-D09)• fast switching time (200 ns)• two included external 12 V / 5 A power supplies (1 x unit power, 1 x PoH)• 19“ / 1 HU housing, 245 mm / 9.65” deep, 2.7 kg / 6.0 lbsPlease note that it may be for the following offers to remnants, discontinued models and returns. A postproduction of items listed is possible only in exceptional cases, the products and their packaging may have slight differences in color and light soiling.

For the demanding video signals …Data-intensive HD signals often cause problems with transmission distances above 10 m (32.8 ft.)! The new HDMI®-over-FIBER system from CARDINAL-DVM enables those signals to be transmitted, together with RS232 and infrared information, error-free over distances of up to 300 m (984 ft.) using a single OM3-multimode line. Hereby EDID data are transmitted bi-directionally, and the HDCP copy protection standard is supported up to version 2.2. The connectors for power supply, HDMI® and IR/RS232 are robust HICON all-metal types and thus perfectly suitable for the tough use “on the road”. For the reliable connection of the fiber optic cable we offer a version with HICON-FIBER4 and another version with NEUTRIK OpticalCON DUO panel socket. The complete DVM-HDFKA device kits are the cost-efficient carefree package for the HDMI® signal transmission via FOC. They include transmitters, receivers, fiber optic cables, power supplies and 1.5 m (4.92 ft.) HDMI® connection cables. With the DVM-HDFKB... versions the transmitter, along with an integrated power supply, is built into the SYSPAN5-XL for an easy integration into the 19” rack.Dependable all-in-one system for the carefree long-distance UHD signal transmission. SET includes: -DVM-HDF4-TX-DVM-HDF4-RX-2 x DVM-194-PS3 power supply-2 x HIMM-0150 HDMI cable-O3F4GL04/00 FIBER4-drumAdvantages:up to 300m transmission distance over multimode fiberssupports HDMI® 1.4 ADVI-support to 1920 x 1200 pxSupports resolutions up to 4K x 2Kcompact and inexpensiveflexiblyTransmission of IR & RS232 control dataHDCP support up to version 2.2bi-directional EDID transmissionApplication:Transmission of HDMI® signals up to 4K x 2K in mobile production environmentRental

Complicated? Forget it...The HDMI ® 2.0 Engineers Toolkit from CARDINAL DVM is easy to use and thus the ideal measuring tool for every installation, the rental and customer service department and your product development. Owing to its comprehensive features, compact dimensions and practical functions controlling HDMI ® sources and sinks as well as cable runs becomes a cakewalk! A lot of problems which may be caused e.g. by a faulty set-up, wiring, EDID communication or HDCP can be analyzed and solved easily.The DVM-HDT-KIT consisting of HDMI ® signal generator + HDMI ® analyzer can handle all common HDMI ® video resolutions and bandwidths.DVM-HDT-KIT features:• high-performance FPGA platform• supports HDMI ® 2.0 up to 4K x 2K (24/25/30/50/60 Hz plus 3D)• supports all common colour rooms (RGB4:4:4, YUV4:4:4, YUV4:2:2 and YUV4:2:0)• supports HDCP 2.2 (HDCP switchable: off/1.4/2.2)• integrated 3“ IPS displays 16:9 (240p) in generator and analyzer• “What You See Is What You Get“ – you can watch in realtime on the display what’s happening at the input/output• intuitive control by local rotary encoder & keys on the unit, via RS232, USB or ethernet• front panel headphone socket for signal control• available as mobile version for the toolcase or rackmount set with 2 x ¼ 19“ 2RU (for SYSBOXX or 2RU 19“ module carrier) • DESK version with built-in battery packs• low power consumption• PC software included for checking individual devices and also large device compounds• integrated cable check function• optional reporting function for generating test protocols (incl. printout/download)• super compact housings (¼ 19“ - 2 HE)• DESK version with foam inlay for toolcase • incl. 2 x HDMI ® cables HIMM of 1.5 m (4.921 ft. length)• incl. 2 x 24V chargers (4-pole XLR)Generator Features:• 34 different test patterns (33 x 2D, 1 x 3D)• 43 different generator resolutions (including ten userdefinable and one automatic resolution)• Integrated EDID memory for up to 10 EDID sets• EDID information can be read, modified, and written back• Audio tests through integrated clock generator (8 different sample rates 32K, 44K, 48K, 88K, 96K, 176K, 192K, and auto) or through external 2.0 mini jack inputAnalyzer Features:• Extensive signal analysis capabilities• Audio metering display for 8 channels in real-time• Real-time signal monitoring with error counters• Integrated EDID memory for up to 14 EDID sets (including 10 user-definable)• HDMI ® input can be activated or deactivated via software for on/off switching simulations

Complicated? Forget it...The HDMI ® 2.0 Engineers Toolkit from CARDINAL DVM is easy to use and thus the ideal measuring tool for every installation, the rental and customer service department and your product development. Owing to its comprehensive features, compact dimensions and practical functions controlling HDMI ® sources and sinks as well as cable runs becomes a cakewalk! A lot of problems which may be caused e.g. by a faulty set-up, wiring, EDID communication or HDCP can be analyzed and solved easily.The DVM-HDT-KIT consisting of HDMI ® signal generator + HDMI ® analyzer can handle all common HDMI ® video resolutions and bandwidths.DVM-HDT-KIT features:• high-performance FPGA platform• supports HDMI ® 2.0 up to 4K x 2K (24/25/30/50/60 Hz plus 3D)• supports all common colour rooms (RGB4:4:4, YUV4:4:4, YUV4:2:2 and YUV4:2:0)• supports HDCP 2.2 (HDCP switchable: off/1.4/2.2)• integrated 3“ IPS displays 16:9 (240p) in generator and analyzer• “What You See Is What You Get“ – you can watch in realtime on the display what’s happening at the input/output• intuitive control by local rotary encoder & keys on the unit, via RS232, USB or ethernet• front panel headphone socket for signal control• available as mobile version for the toolcase or rackmount set with 2 x ¼ 19“ 2RU (for SYSBOXX or 2RU 19“ module carrier) • DESK version with built-in battery packs• low power consumption• PC software included for checking individual devices and also large device compounds• integrated cable check function• optional reporting function for generating test protocols (incl. printout/download)• super compact housings (¼ 19“ - 2 HE)• DESK version with foam inlay for toolcase • incl. 2 x HDMI ® cables HIMM of 1.5 m (4.921 ft. length)• incl. 2 x 24V chargers (4-pole XLR)Generator Features:• 34 different test patterns (33 x 2D, 1 x 3D)• 43 different generator resolutions (including ten userdefinable and one automatic resolution)• Integrated EDID memory for up to 10 EDID sets• EDID information can be read, modified, and written back• Audio tests through integrated clock generator (8 different sample rates 32K, 44K, 48K, 88K, 96K, 176K, 192K, and auto) or through external 2.0 mini jack inputAnalyzer Features:• Extensive signal analysis capabilities• Audio metering display for 8 channels in real-time• Real-time signal monitoring with error counters• Integrated EDID memory for up to 14 EDID sets (including 10 user-definable)• HDMI ® input can be activated or deactivated via software for on/off switching simulations