Cat.6a patch cable S/FTP 10Gbit/s PiMF GHMT certified
$5.93*
C6AB-0050-GE
Colour:
yellow
|
Length:
0,50m
These high-quality GHMT-certified Cat.6A patch cables are ideally suited for data transfer rates of up to 10 Gbit and transmission frequencies of 500 Mhz max. The processed jacket material is halogen-free and flame-retardant; the wires are shielded per pair; in addition, the cables have an overall braided copper screen. The assembled RJ45 connectors are equipped with a slim, molded kink protection sleeve and a retainer tab protection. Therefore these connection cables are ideal for an increased demand for bandwidth of up to Gbit. The cables are available in different colors and lengths.
Variants from $5.30*
HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-female connector, gold plated contact(s), straight, black
$9.17*
HI-X3CF-HD-B
A true all-rounder...is the new HICON XLR connector HI-MARLIN. This connector does not only look good and lies ergonomically in the hand; due to its special design it also solves many problems an installation or event technician might be faced with.These HICON HI-MARLIN XLR connectors, which are water- and dustproof according to IP67, repel a direct water jet or infiltrating moisture and may even be put under water without impairing its function.Many new cables of the professional audio technology sector have a gas-injected foam insulation, which is why standard chuck strain reliefs are not ideal. They would squash the delicate wire insulations, thereby affecting the electrical values. Here the lamellar seal with internal grommet offers the perfect solution. The pressure of the strain relief is evenly spread over the entire cable diameter and squeezes no bumps into the jacket and insulation material. Special emphasis is placed on the locking device, which is very convenient and extremely durable. It has no long spring travels and the pressure spring-loaded mechanism is located in the locking knob instead of the contact base, as is usually the case. This also guarantees an easy and fuss-free mounting or cable assembly. These connectors are loyal companions in particularly wet situations such as the installation in leisure parks, near the coast, in ship and boat building, with outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology etc.The HICON HI-MARLIN XLR connectors are salt water and UV resistant.Advantages:No infiltration of water, dirt, moisture, sandWater- and dustproof according to IP67 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
Cat.6a patch cable S/FTP HIGHFLEX RJ45 RJ45, 500MHz
$12.59*
C6AFU0200-SW
Colour:
black
|
Length:
2,00m
Even the curviest banana will be amazed …when the SC-MERCATOR CAT.6a highflex patch cable with only 6 mm [0.23“] in outer diameter and an extremely small bending radius of <20 mm [0.78“] is winding its way through narrow patch panels, data cabinets and touring racks. And this despite its sturdy, robust PVC jacket plus S/FTP design with a braided shield and AL/PT foil screen around the 4x2xAWG26/7 wire pairs. The overall construction is guaranteed to meet the CAT.6a performance up to 500 MHz. The TIA 568 B standardized ready-made C6AFU patch cable comes with ultra compact 25 mm [1“] short RJ45 connectors and 50 mm [2“] transparent shrinking tubes for individual labeling. The NEUTRIK NE8MX / NE8MX-B etherCON cable plug protection can be retrofitted anytime, ideal for the robust cabling of touring racks.
Variants from $7.13*
HICON XLR, water- and dustproof IP67 while connected , 3-pole , metal-male connector, gold plated contact(s), straight, black
$8.17*
HI-X3CM-HD-B
A true all-rounder...is the new HICON XLR connector HI-MARLIN. This connector does not only look good and lies ergonomically in the hand; due to its special design it also solves many problems an installation or event technician might be faced with.These HICON HI-MARLIN XLR connectors, which are water- and dustproof according to IP67, repel a direct water jet or infiltrating moisture and may even be put under water without impairing its function.Many new cables of the professional audio technology sector have a gas-injected foam insulation, which is why standard chuck strain reliefs are not ideal. They would squash the delicate wire insulations, thereby affecting the electrical values. Here the lamellar seal with internal grommet offers the perfect solution. The pressure of the strain relief is evenly spread over the entire cable diameter and squeezes no bumps into the jacket and insulation material. Special emphasis is placed on the locking device, which is very convenient and extremely durable. It has no long spring travels and the pressure spring-loaded mechanism is located in the locking knob instead of the contact base, as is usually the case. This also guarantees an easy and fuss-free mounting or cable assembly. These connectors are loyal companions in particularly wet situations such as the installation in leisure parks, near the coast, in ship and boat building, with outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology etc.The HICON HI-MARLIN XLR connectors are salt water and UV resistant.Advantages:No infiltration of water, dirt, moisture, sandWater- and dustproof according to IP67 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
front panel 2 x D-Series cutout, 90° angled, 2 HE, 1 BE for SYS-series, Galvanized sheet steel, colour: grey
$20.13*
SYFB21-2D
Please order screws separately
HICON Connector housing XLR format for RJ45-Standard Connectors, black
$4.31*
HI-RJ45-HD
HICON RJ45 design RJ45 protective housing...fits D flange RJ45 sockets from NEUTRIK® and our RJ45 CAT.6a plug RJ45C6XL.For the CAT.8.1 plug, please use HI-RJ45-HDC8.Miscellaneous:Connector housing: Full metalSupplied without RJ45 connector.
HICON XLR, Waterproof and dustproof to IP54 while connected , 3-pole , Polyamide-female connector, gold plated contact(s), straight, black
$8.17*
HI-X3DF-HD-B
A true all-rounder...Is the new HI-MARLIN XLR connector from HICON. Not only does it look good and lies ergonomically in your hand - due to its special construction, it also solves many problems installation or event technicians are faced with. A lot of new cables in professional audio engineering are gas-injected which is why standard chuck strain reliefs are not ideal. They crush the sensitive wire insulations and thereby affect the electrical values. Here the lamellar seal with inside rubber gasket is the perfect solution. The pressure from the strain relief is evenly distributed over the entire cable diameter and presses no dips into the jacket and insulation material. We paid special attention to the locking mechanism which is very compact and extremely durable. It has no long spring travels and the pressure suspension is located in the locking knob and not – as otherwise usual – in the contact carrier. This ensures a simple, no-frills assembly or cable manufacture. These connectors are faithful companions especially in wet environments such as the installation in amusement parks, in coastal areas, in ship and boat building, at outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology, etc. The HICON HI-MARLIN XLR connectors are saltwater and UV resistant.Protection only applies when plugged inAdvantages:No infiltration of water, dirt, moisture, sandWaterproof and dustproof to IP54 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
Hdmi® highspeed-cable with ethernet & arc, 4k 18g, 3,6mm | HDMI® A / HDMI® A, HICON
$32.20*
HI-HDSL-0125
Length:
1.25 m (4.1 ft.)
Slim fitThey can’t be made any smaller …Just the size of the HDMI contact surface: the super compact all-metal connectors made by HICON of the new HDMI® Ultraslim HI-HDSL series. The 100 % shielded cable with 3.6 mm (0.14 in.) in diameter has also undergone a slimming diet. In the lengths of 0.35 m / 0.75 m / 1.25 m and 2.0 m (13.75 / 29.5 / 49.25 and 78.75 in.) the feather-weight offers a performance of 18 Gb/s @ 60Hz and is thus the ideal solution for UHD camera applications. The unbeatable compactness and the non-slip plug design with a perfectly matched plug-in force make it an eyecatcher on every conference table. Even the hi-fi & home sector has already discovered the Ultraslim cable for the 4K60 4:4:4, Dolby Vision™, HDR, HLG and HEAC formats, because space in racks or cabinets is mostly very scarce here as well.For longer 18G transmission paths up to 100 m (109 yds.) Sommer cable recommends their robust HDMI® AOC ARMORED cable series called HI-HAOC.Advantages:Extremely compact - the cross-section of the connector corresponds to the HDMI mating faceOnly 3.6mm cable diameterGuaranteed bandwidth from 18Gbit/s up to 2m cable lengthVery low weightEasy to grip connector designExcellent plug-in torque with perfect fit in each socketMiscellaneous:HDMI Type A to HDMI Type A
Variants from $25.88*
HICON XLR, Water- and dust-proof IP54 in mated condition , 3-pole , Polyamide-male connector, gold plated contact(s), straight, black
$9.09*
HI-X3DM-HD-B
A true all-rounder...Is the new HI-MARLIN XLR connector from HICON. Not only does it look good and lies ergonomically in your hand - due to its special construction, it also solves many problems installation or event technicians are faced with. A lot of new cables in professional audio engineering are gas-injected which is why standard chuck strain reliefs are not ideal. They crush the sensitive wire insulations and thereby affect the electrical values. Here the lamellar seal with inside rubber gasket is the perfect solution. The pressure from the strain relief is evenly distributed over the entire cable diameter and presses no dips into the jacket and insulation material. We paid special attention to the locking mechanism which is very compact and extremely durable. It has no long spring travels and the pressure suspension is located in the locking knob and not – as otherwise usual – in the contact carrier. This ensures a simple, no-frills assembly or cable manufacture. These connectors are faithful companions especially in wet environments such as the installation in amusement parks, in coastal areas, in ship and boat building, at outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology, etc. The HICON HI-MARLIN XLR connectors are saltwater and UV resistant.Protection only applies when plugged inAdvantages:No infiltration of water, dirt, moisture, sandWaterproof and dustproof to IP54 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleMiscellaneous:Protective cap includedApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
Universal-serial-bus USB 3.2 | USB 3.2 A male / USB 3.2 C male
$12.88*
HI-U3AC-0050
Length:
0,50m
USB 3 Gen 2 connection cableThe Universal Serial Bus (USB) interface has become established for connecting peripheral devices to the computer.
The latest standard is USB 3.2 with the following transfer rates:
- USB 3.2 Gen 1 (SuperSpeed USB) with a transfer rate of 5 Gbit/s.
- USB 3.2 Gen 2 (SuperSpeed USB 10Gbps) with a transfer rate of 10 Gbit/s
- USB 3.2 Gen 2x2 (SuperSpeed USB 20Gbps) with a transfer rate of 20 Gbit/s
The USB Type C connector also introduced the Power Delivery standard. This can supply devices (parallel to the data connection) with a power consumption of up to 100 W. Via the so-called Alternate modes, other signals, such as DisplayPort or HDMI, can also be transmitted via the USB C-C connector cables.
Translated with www.DeepL.com/Translator (free version)The HI-U3AC series impresses with a visually appealing and robust nylon/cotton jacket around a very flexible cable. The fully shielded USB connectors are equipped with a slim, anodized aluminum outer housing, which is captively connected to the connector in a special molding process.Advantages:fully shielded connectors with aluminum housing100% compatible with USB 2.x and 3.xrobust nylon/cotton cable jacketMiscellaneous:maximum transmission rate: 10 Gbit/sLine structure according to USB-IF standardmaximum applicable cable length at full bandwidth: 2mmaximum 18W charging powerApplication:USB type A male <> USB type C maleUSB 3.2 Gen 2, SuperSpeed USB 10Gbps
RJ45 CAT.6a, IDC-female connector, Keystone Clip-In, grey, 1 pc.
$7.02*
RJ45CFXL-P1
This new and very upscale CAT6A RJ-45 Keystone module is made for tool-free installation and meets all the requirements for structured communication networks pursuant to Cat. 6A Re-Embedded and Class EA (500 MHz, 10GE, in accordance with ISO/IEC 11801:2002 AM2). Owing to the large range of possible wire cross-sections, the module can be used with almost all CAT cables. Since certified products are demanded in more and more installation situations, we've had the module taken up into the GHMT Verification Program – which guarantees you the highest possible quality standard. The module is available either as a practical set of 8 or as single units.Advantages:suitable for AWG26/1 - AWG22/1, AWG27/7-AWG22/7very short designsuitable for POE+tool-free assemblyincl. dust protection cap & cable binderMiscellaneous:recommended cable: SC-Mercator CAT.7 / CAT.7a
Usb 3.2 USB 3.2 | USB 3.2 C male / USB 3.2 C male
$46.00*
HI-U3CC-0400
Length:
4,00m
USB 3 Gen 2 connection cableThe Universal Serial Bus (USB) interface has become established for connecting peripheral devices to the computer.
The latest standard is USB 3.2 with the following transfer rates:
- USB 3.2 Gen 1 (SuperSpeed USB) with a transfer rate of 5 Gbit/s.
- USB 3.2 Gen 2 (SuperSpeed USB 10Gbps) with a transfer rate of 10 Gbit/s
- USB 3.2 Gen 2x2 (SuperSpeed USB 20Gbps) with a transfer rate of 20 Gbit/s
The USB Type C connector also introduced the Power Delivery standard. This can supply devices (parallel to the data connection) with a power consumption of up to 100 W. Via the so-called Alternate modes, other signals, such as DisplayPort or HDMI, can also be transmitted via the USB C-C connector cables.
Translated with www.DeepL.com/Translator (free version)The HI-U3CC series impresses with a visually appealing and robust nylon/cotton jacket around a very flexible cable. The fully shielded USB connectors are equipped with a slim, anodized aluminum outer housing, which is captively bonded to the connector in a special molding process.Advantages:fully shielded connectors with aluminum housing100% compatible with USB 2.x and 3.xrobust nylon/cotton cable jacketMiscellaneous:maximum transmission rate: 20 Gbit/sLine structure according to USB-IF standardmaximum applicable cable length at full bandwidth: 2mmaximum 100W charging powere-marker chipset in both connectorsfull support of all alternate modesCable diameter 3m = 5,5mmCable diameter <3m= 5.0mmCable structure 3m = AWG 20/30Cable structure <3m = AWG 22/32Contact surface: Pins gold plated 15µApplication:USB type C male <> USB type C maleUSB 3.2x2 Gen 2, SuperSpeed USB 20Gbps
Variants from $24.15*
HICON HDMI® adapter ring
$166.75*
HI-HDAPR-01
HDMI® adapter ringLike a bead necklace, this practical adapter set is threaded on a stainless steel rope with screw lock, so you have always the right adapter ready to adapt the most common signal types in the IT & media technology sectors to HDMI® and e.g. offer all your guests the possibility to connect their laptops to the present monitor/beamer in the conference room. All adapter variants support 4K60 signals.The following connectors are included:Displayport 1.4 plug → HDMI® socketMiniDisplayport 1.4 plug → HDMI® socketUSB-C plug (DP Alt Mode) → HDMI® socketIncluded are also three cable clips for fastening the adapter ring to the present HDMI® cable. The clips have a clamping range of 4.5 to 8.6 mm (0.18 to 0.34 in.). VGA signals shall also be connected? The active DVM-HDT-VAHD2 VGA-HDMI® adapter is a great suppplement. As a suitable HDMI® cable we recommend our HI-HDSL series with super compact connectors with increased plug-in force.
HICON CAT6A Armored Cable 10G
$40.82*
HI-C6ACU0200
Length:
2,00 m
CAT.6A Armored – “The 10G flex knight” …in his steel armor protects the vulnerable 10G-CAT.6A interior. Its reinforced construction enables a high resilience with a flexibility unknown in network cables so far. The cable falls and lies like a somewhat thicker microphone cable – it’s perfect for heavy-duty wirings in the studio, on stage or in other harsh, rough environments! Despite its great mechanical advantages you don’t have to cut corners as to the technical values. Here we use an AWG28 U/FTP construction with a 100 % shielding made of real copper wires with an outer diameter of 7.3 mm (0.29 in.). The robust RJ45 connectors are plated with a 50 μ gold coating. The very elastic design allows a very small bending radius of 50 mm (1.97 in.). The overall construction guarantees to meet both the CAT.6A performance up to 500 MHz and also the POE+ requirements (802.3at) for at least up to 30 m (98.4 ft.) patch cable length. The NEUTRIK NE8MX / NE8MX-B etherCON protective sleeve can be retrofitted to the supplied TIA568B pin assigned patch cable anytime. In additon, the cable is fitted with two clear unshrunk 50 mm (1.97 in.) shrinking tubes for your individual lettering.Advantages:ultra robust and flexiblewith stainless steel reinforcement, t=0,35mmtread stablehighly elastic PVC outer sheathMiscellaneous:Cable construction: 4 x 2 x AWG28/7 U/FTP with support crossTemperature range: -20°C ... +75°Cguaranteed CAT6a performance up to 30mPoE++ compatibleAssignment according to TIA 568incl. 5cm unshrunk clear heat shrink tube for labeling
HICON jack (3,5mm), 2-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black
$18.75*
HI-J35M04
Little big manThe 3.5 mm (1/8“) mini jack connectors can be used on countless compact devices like MP3 players, sound cards, bodypacks etc. Here the HICON range offers a wide array of special features such as those versions• HI-J35S-SCREW-M/-Fwith screw lock for mobile applications (e.g. bodypacks)• HI-J35S02/T02 with big cable holder (for twin cables, thick cables)• HI-J35S03 with compact design• HI-J35M04/S04 with chuck strain relief (for high tensile forces)• HI-J3563S with 6.3 mm (1/4“) screw adapter (for headphones etc.)• HI-J35SA, 90° angledAll variants have genuine gold-plated solid pins and come with a 5-year warranty.Advantages:With soldering lug and chuck strain relief.
Hdmi® aoc install | HDMI® / HDMI®
$261.06*
HI-HOIC-5000
Length:
50,00m
HDMI® AOC (Active Optical Cable) - UHD-HDMI installation with dovetailThe AOC HI-HOIC installation connection cable uses a high-performance fiber-optic construction in a highflex jacket and is equipped with robust full-metal connectors from our own brand HICON together with a high-quality chipset made in Germany. Its compact diameter of only 4 mm allows to lay the cable almost anywhere in a convenient and space-saving manner. The optical transmission of the high-speed data works very reliably and is also suitable for use in RF polluted environments. A comfortable (unidirectional) feed-in into empty pipes and ducts is enabled by the super compact micro-HDMI® type-D connector on the sink side (monitor, beamer, TV). The supplied clip-on feed-in aid (13.7 x 10.14 mm) gives the connector extra protection and ensures an easy and safe installation. Afterwards the micro-HDMI® can be converted to the HDMI® standard type-A by means of a precise, form-fit extension adapter with dovetail guide. This connection cable delivers an absolutely error- and loss-free signal transmission and thus a jerk-free, crystal-clear video presentation and outstanding sound. It’s downward compatible and supports all previous HDMI® formats and standards.An optional USB voltage feed-in adapter is included in the delivery – but due to the low power drain of the chipset it will hardly be ever used.Miscellaneous:UHD 4K @60fps YUV 4:4:4HDMI 2.0a compliantHDCP support up to V2.2HDR/ ARC/ HEC/ EDID supportsupports all HDMI audio formats600MHz pixel clockHDMI High Speed with Ethernetultra-thin, robust and flexible hybrid cable with 4.5mm diameterblack compact connectorsmax. 250N tensile forceincl. adapter to HDMI D -> Aincl. insertion aid for type D plugType D plug only 13.7x10.14mm in cross-section - ideal for ductingAttention: For the power supply of the AOC cable, both plugs must be directly connected to a device. Intermediate plugs and extensions can impair the function.
Variants from $157.56*
RJ45 CAT.8.1, 8-pole , metal-, IDC-male connector, gold plated contact(s), straight, grey
$14.99*
RJ45C8XL
Advantages:four different ways for cable outputGHMT-certifiedtool-free mountingMiscellaneous:without strain reliefApplication:suitable for litz wires and solid wires AWG26 to AWG22max. data rate up to 40 Gbit/smax. transmission frequency of 2000 MHzonly for permanent installation
HICON XLR, 5-pol , metal-female connector, gold plated contact(s), water- and dustproof IP67 while connected/straight, black
$12.88*
HI-X5CF-HD-B
A true all-rounder...is the new HICON XLR connector HI-MARLIN. This connector does not only look good and lies ergonomically in the hand; due to its special design it also solves many problems an installation or event technician might be faced with.These HICON HI-MARLIN XLR connectors, which are water- and dustproof according to IP67, repel a direct water jet or infiltrating moisture and may even be put under water without impairing its function.Many new cables of the professional audio technology sector have a gas-injected foam insulation, which is why standard chuck strain reliefs are not ideal. They would squash the delicate wire insulations, thereby affecting the electrical values. Here the lamellar seal with internal grommet offers the perfect solution. The pressure of the strain relief is evenly spread over the entire cable diameter and squeezes no bumps into the jacket and insulation material. Special emphasis is placed on the locking device, which is very convenient and extremely durable. It has no long spring travels and the pressure spring-loaded mechanism is located in the locking knob instead of the contact base, as is usually the case. This also guarantees an easy and fuss-free mounting or cable assembly. These connectors are loyal companions in particularly wet situations such as the installation in leisure parks, near the coast, in ship and boat building, with outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology etc.The HICON HI-MARLIN XLR connectors are salt water and UV resistant.Advantages:No infiltration of water, dirt, moisture, sandWater- and dustproof according to IP67 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
HICON XLR, Waterproof and dustproof to IP54 while connected , 5-pol , Polyamide-female connector, gold plated contact(s), straight, black
$11.39*
HI-X5DF-HD-B
A true all-rounder...Is the new HI-MARLIN XLR connector from HICON. Not only does it look good and lies ergonomically in your hand - due to its special construction, it also solves many problems installation or event technicians are faced with. A lot of new cables in professional audio engineering are gas-injected which is why standard chuck strain reliefs are not ideal. They crush the sensitive wire insulations and thereby affect the electrical values. Here the lamellar seal with inside rubber gasket is the perfect solution. The pressure from the strain relief is evenly distributed over the entire cable diameter and presses no dips into the jacket and insulation material. We paid special attention to the locking mechanism which is very compact and extremely durable. It has no long spring travels and the pressure suspension is located in the locking knob and not – as otherwise usual – in the contact carrier. This ensures a simple, no-frills assembly or cable manufacture. These connectors are faithful companions especially in wet environments such as the installation in amusement parks, in coastal areas, in ship and boat building, at outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology, etc. The HICON HI-MARLIN XLR connectors are saltwater and UV resistant.Protection only applies when plugged inAdvantages:No infiltration of water, dirt, moisture, sandWaterproof and dustproof to IP54 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
HICON XLR, 5-pol , metal-male connector, gold plated contact(s), straight/water- and dustproof IP67 while connected, black
$10.81*
HI-X5CM-HD-B
A true all-rounder...is the new HICON XLR connector HI-MARLIN. This connector does not only look good and lies ergonomically in the hand; due to its special design it also solves many problems an installation or event technician might be faced with.These HICON HI-MARLIN XLR connectors, which are water- and dustproof according to IP67, repel a direct water jet or infiltrating moisture and may even be put under water without impairing its function.Many new cables of the professional audio technology sector have a gas-injected foam insulation, which is why standard chuck strain reliefs are not ideal. They would squash the delicate wire insulations, thereby affecting the electrical values. Here the lamellar seal with internal grommet offers the perfect solution. The pressure of the strain relief is evenly spread over the entire cable diameter and squeezes no bumps into the jacket and insulation material. Special emphasis is placed on the locking device, which is very convenient and extremely durable. It has no long spring travels and the pressure spring-loaded mechanism is located in the locking knob instead of the contact base, as is usually the case. This also guarantees an easy and fuss-free mounting or cable assembly. These connectors are loyal companions in particularly wet situations such as the installation in leisure parks, near the coast, in ship and boat building, with outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology etc.The HICON HI-MARLIN XLR connectors are salt water and UV resistant.Advantages:No infiltration of water, dirt, moisture, sandWater- and dustproof according to IP67 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
Cat. 8.1 SLIM patch cable 2xRJ45 40Gbit/s 2000 MHz U/FTP
$8.05*
C8SL-0150-SW
Colour:
black
|
Length:
1,50m
Advantages:The Cat 8.1 SLIM U/FTP (PiMF) patch cable is designed for a transmission speed up to 40 Gbit/s and a transmission bandwidth up to 2000 MHzIt is ideal for superfast high-speed networks, e.g. backbone connections between switches in the server rack.It is 100% compatible with all devices with RJ45 network connector and also backward compatible with other CAT variants, e.g. Cat.5 Cat.5e Cat.6 Cat.6a Cat.7Miscellaneous:CAT8.1, PIMF black, U/FTP, AWG30/74.3 mm diameterCompatible with 40GBASE-T, 25GBASE-T and below
Variants from $5.06*
HICON jack (3,5mm), 3-pole , metal-, Soldering-male connector, gold plated contact(s), straight, black
$18.28*
HI-J35S04
Little big manThe 3.5 mm (1/8“) mini jack connectors can be used on countless compact devices like MP3 players, sound cards, bodypacks etc. Here the HICON range offers a wide array of special features such as those versions• HI-J35S-SCREW-M/-Fwith screw lock for mobile applications (e.g. bodypacks)• HI-J35S02/T02 with big cable holder (for twin cables, thick cables)• HI-J35S03 with compact design• HI-J35M04/S04 with chuck strain relief (for high tensile forces)• HI-J3563S with 6.3 mm (1/4“) screw adapter (for headphones etc.)• HI-J35SA, 90° angledAll variants have genuine gold-plated solid pins and come with a 5-year warranty.Advantages:With soldering lug and chuck strain relief.
RJ45 CAT.6a, IDC-female connector, Keystone Clip-In, grey, Set of 8
$52.78*
RJ45CFXL-P8
This new and very upscale CAT6A RJ-45 Keystone module is made for tool-free installation and meets all the requirements for structured communication networks pursuant to Cat. 6A Re-Embedded and Class EA (500 MHz, 10GE, in accordance with ISO/IEC 11801:2002 AM2). Owing to the large range of possible wire cross-sections, the module can be used with almost all CAT cables. Since certified products are demanded in more and more installation situations, we've had the module taken up into the GHMT Verification Program – which guarantees you the highest possible quality standard. The module is available either as a practical set of 8 or as single units.Advantages:suitable for AWG26/1 - AWG22/1, AWG27/7-AWG22/7very short designsuitable for POE+tool-free assemblyincl. dust protection cap & cable binderMiscellaneous:recommended cable: SC-Mercator CAT.7 / CAT.7a
Universal serial bus extension USB 3.2 | USB 3.2 C male / USB 3.2 C female
$30.48*
HI-U3CF-0150
Length:
1,50m
USB 3 Gen 2 connection cableThe Universal Serial Bus (USB) interface has become established for connecting peripheral devices to the computer.
The latest standard is USB 3.2 with the following transfer rates:
- USB 3.2 Gen 1 (SuperSpeed USB) with a transfer rate of 5 Gbit/s.
- USB 3.2 Gen 2 (SuperSpeed USB 10Gbps) with a transfer rate of 10 Gbit/s
- USB 3.2 Gen 2x2 (SuperSpeed USB 20Gbps) with a transfer rate of 20 Gbit/s
The USB Type C connector also introduced the Power Delivery standard. This can supply devices (parallel to the data connection) with a power consumption of up to 100 W. Via the so-called Alternate modes, other signals, such as DisplayPort or HDMI, can also be transmitted via the USB C-C connector cables.
Translated with www.DeepL.com/Translator (free version)The HI-U3CF series impresses with a visually appealing and robust nylon/cotton jacket around a very flexible cable. The fully shielded USB connectors are equipped with a slim, anodized aluminum outer housing, which is captively connected to the connector in a special molding process.Advantages:fully shielded connectors with aluminum housing100% compatible with USB 2.x and 3.xrobust nylon/cotton cable jacketMiscellaneous:maximum transmission rate: 10 Gbit/sLine structure according to USB-IF standardmaximum 100W charging powere-marker chipset in USB C male connectorfull support of all alternate modesApplication:USB type C male <> USB type C femaleUSB 3.2 Gen 2, SuperSpeed USB 10Gbps
Variants from $18.05*
HICON XLR, Waterproof and dustproof to IP54 while connected , 5-pol , Polyamide-male connector, gold plated contact(s), straight, black
$11.91*
HI-X5DM-HD-B
A true all-rounder...Is the new HI-MARLIN XLR connector from HICON. Not only does it look good and lies ergonomically in your hand - due to its special construction, it also solves many problems installation or event technicians are faced with. A lot of new cables in professional audio engineering are gas-injected which is why standard chuck strain reliefs are not ideal. They crush the sensitive wire insulations and thereby affect the electrical values. Here the lamellar seal with inside rubber gasket is the perfect solution. The pressure from the strain relief is evenly distributed over the entire cable diameter and presses no dips into the jacket and insulation material. We paid special attention to the locking mechanism which is very compact and extremely durable. It has no long spring travels and the pressure suspension is located in the locking knob and not – as otherwise usual – in the contact carrier. This ensures a simple, no-frills assembly or cable manufacture. These connectors are faithful companions especially in wet environments such as the installation in amusement parks, in coastal areas, in ship and boat building, at outdoor festivities like Christmas markets, funfairs, skiing events, in sediment technology, etc. The HICON HI-MARLIN XLR connectors are saltwater and UV resistant.Protection only applies when plugged inAdvantages:No infiltration of water, dirt, moisture, sandWaterproof and dustproof to IP54 while connectedVery good handling with pleasant plug-in sensationAES/EBU conform (no vibration sensor)Especially cable-protecting strain reliefHigh mating cycles due to intelligent, zero-wear locking mechanismEasy and fast assembleMiscellaneous:Protective cap includedApplication:Installation at outdoor events, in ship and boat building, skiing events etc.Permanent connections in coastal areas
Device cup insert for 24 Keystone clip modules, 19” Keystone patchpanel, 1 HE
$41.23*
KST-FRAME24/19
Plug and play...is the aim of every hardware designer and the desire of every user. With these panels things will be working – at least when they are connected correctly. The following components are definitely of high quality and geared to our cable range.KEYSTONE CONNECTION FRAMES