the revolutionary solution for inhouse installationKATI® BLITZ MINI was specifically developed for the growing demand of subsequent fibre-optic cables installation in existing as well as occupied tubes.Where conventional pulling tools are not sufficient anymore, the KATI® BLITZ MINI shows its unique possibilities with its 1.2 mm diameter fibreglass profile. Especially the installation of fibre-optic cables in an already existing infrastructure is easier and sometimes even at all possible with the KATI® BLITZ MINI, which makes it the ideal support for the pulling of fibre-optic cables in buildings.The Polykat® Mini combines high rod rigidity and pushing stability with a very small diameter. With a very small bending radius of 15mm it was specifically developed to run through extremely narrow curves. The combination of Flexi Sonde Mini and low-friction insertion tube enables a quick and easy cable installation. The Flexi Sonde Mini has a special contour that passes narrow sections and curves easily. The low-friction insertion tube leads the rod and protects it form breakages when pulling back.ThePolykat® Mini fibreglass profile, as well as the spare rods pre-spooled into a cas-sette are available in 15, 25 and 35 meter versions. Therefore the cassette can be exchanged quick and easy. The rod runs automatically out of the cassette and supports the pushing of the rod. Due to this the physical effort will be minimized.Accessories included5 Flexi Sonds Mini7 Rod ends Mini1 Tape1 Guiding hose 2,5 m with bush1 Abrasive pad 50 x 50 mm1 Special adhesive 3 gAdvantages:Flexi-Sonde Mini: special contour to pass narrow sections and curvesRotatable cassette: By spinning the cassette the rod can be pushed easily into conduitsAxle bearing of the cassette: the high reset force supports the automatic unwinding of the rod.Insertion tube: protects and guides the fibreglass while pushing in and prevents it from breaking when pulling back.Handling frame with rod-stop: prevents the automatic unwinding of the rod when not in use.Miscellaneous:Rod diameter: 1,2mmProven strength connection Rod/Rod end: >0,35 kNProven strength of Flexi Sonde Mini: >0,25 kNMinimum bending radius: 15mmBreaking strain: 1,3 kN

KATI® BLITZ COMPACT 2.0The future of pulling systemsKatimex sets new standards in pulling devices by introducing the KATI® BLITZ COMPACT 2.0 to the market. Katimex professionals and electricians further developed the well-known devices KATI® BLITZ COMPACT 2.0, Locating and Vario and thoroughly tested and examined the new device. KATI® BLITZ COMPACT 2.0 is the ideal tool for professionals. It is characterized by its improved, ergo-nomic design, user-friendly handling and practice-approved functions. The handy crank for the 20 and 30 m version makes the winding of the Polykat® fibreglass very easy.The combination of both Flexi-Sonde 2.0 and Rod End 2.0 enables a very narrow bending radius of just 30 mm. The rod guide is reinforced with fibreglass that makes it extremely wear-resistant. The specific return stop protects the rod from gliding into the box accidentally while winding. A service box with lots of accessories and the reliable high Katimex quality accomplish the KATI® BLITZ COMPACT 2.0 and make it an indispensable tool for electrical engineers. The KATI® BLITZ COMPACT 2.0 has a handy crank in the 20 und 30 meter version for winding the rod quickly into the casing. The rod can be pulled out of the casing easily by hand. The 50 m version has no crank.Accessories supplied:5 pulling eyes Ø 6 mm, brass with M5 thread1 cable grip with integral swivel for Ø 6-9 mm cables2 Rod Ends 2.0 with external M5 thread3 splices, brass1 special adhesive (3g)1 Flexi-Sonde 2.0 Ø 7 mm1 Flexi-Sonde 2.0 Ø 10 mmMiscellaneous:rod diameter: 3,0mmtensile strength of connection rod/rod end: 1,0 kNminimum radius of curvature: 3,0mmbreaking strength of rod: 5,0kN

KATI® BLITZ COMPACT 2.0The future of pulling systemsKatimex sets new standards in pulling devices by introducing the KATI® BLITZ COMPACT 2.0 to the market. Katimex professionals and electricians further developed the well-known devices KATI® BLITZ COMPACT 2.0, Locating and Vario and thoroughly tested and examined the new device. KATI® BLITZ COMPACT 2.0 is the ideal tool for professionals. It is characterized by its improved, ergo-nomic design, user-friendly handling and practice-approved functions. The handy crank for the 20 and 30 m version makes the winding of the Polykat® fibreglass very easy.The combination of both Flexi-Sonde 2.0 and Rod End 2.0 enables a very narrow bending radius of just 30 mm. The rod guide is reinforced with fibreglass that makes it extremely wear-resistant. The specific return stop protects the rod from gliding into the box accidentally while winding. A service box with lots of accessories and the reliable high Katimex quality accomplish the KATI® BLITZ COMPACT 2.0 and make it an indispensable tool for electrical engineers. The KATI® BLITZ COMPACT 2.0 has a handy crank in the 20 und 30 meter version for winding the rod quickly into the casing. The rod can be pulled out of the casing easily by hand. The 50 m version has no crank.Accessories supplied:5 pulling eyes Ø 6 mm, brass with M5 thread1 cable grip with integral swivel for Ø 6-9 mm cables2 Rod Ends 2.0 with external M5 thread3 splices, brass1 special adhesive (3g)1 Flexi-Sonde 2.0 Ø 7 mm1 Flexi-Sonde 2.0 Ø 10 mmMiscellaneous:rod diameter: 3,0mmtensile strength of connection rod/rod end: 1,0 kNminimum radius of curvature: 3,0mmbreaking strength of rod: 5,0kN